Formats and templates
-
Pomoc
- Začíname
- Usmernenie
- Testovacie metódy a alternatívy k testovaniu
- Webové semináre
-
Nástroje na predloženie dokumentácie
- Manuals
-
REACH-IT
- Postup registrácie
- PPORD
- Oznamovanie látok vo výrobkoch
- Predloženie oznámenia následného užívateľa o autorizovaných použitiach
- Predloženie správy následného užívateľa v súvislosti s nepodporovanými použitiami
- Predloženie správy následného užívateľa v súvislosti s rozdielmi v klasifikácii
- Ako sa predkladá a aktualizuje oznámenie klasifikácie a označovania?
- Žiadosť o alternatívny chemický názov v zmesiach
- IUCLID
- CHESAR
- SPC
- R4BP 3
- ePIC
- Cloudové služby agentúry ECHA
- Interact Portal
- EUSES
- System-to-system submission service
- Národné asistenčné pracoviská
- Praktické príklady expozičných scenárov
- Praktické príklady správ o chemickej bezpečnosti
- Nahrádzanie nebezpečných chemikálií
- Malé a stredné podniky (MSP)
- Odporúčania pre registrujúcich
-
Fázy registrácie
- 1. Vaše registračné povinnosti
- 2. Vyhľadanie vašich spoluregistrujúcich
- 3. Zorganizujte sa so svojimi spoluregistrujúcimi
-
4. Posúdenie nebezpečenstva a rizika
- Požiadavky na informácie: 1 až 10 ton ročne
- Požiadavky na informácie: 10 až 100 ton ročne
- Požiadavky na informácie: 100 až 1 000 ton ročne
- Požiadavky na informácie: 1 000 alebo viac ton ročne
- Úpravy štandardných požiadaviek na informácie
- Ako zabrániť zbytočnému testovaniu na zvieratách
- Stratégia zhromažďovania vašich údajov
- 5. Vytvorenie registračnej dokumentácie
- 6. Predloženie registračnej dokumentácie
- 7. Ako sa treba pripraviť na aktualizácie dokumentácií
- Identifikácia látky
- Obmedzenie
-
Autorizácia
- Identifikácia látok vzbudzujúcich veľmi veľké obavy
-
Ako požiadať o autorizáciu
- Vzťahuje sa na vás autorizácia?
- Pripravte postup podania žiadosti
- Začnite s prípravou žiadosti
- Informujte agentúru ECHA a požiadajte o informačné stretnutie pred podaním žiadosti
- Dokončite žiadosť
- Podajte žiadosť
- Zapojte sa do prípravy stanoviska
- Splňte si svoje povinnosti
- Predložte správu o preskúmaní, ak ešte potrebujete látku používať
- Opýtajte sa agentúry ECHA na záležitosti týkajúce sa žiadostí o autorizáciu
- Sociálno-ekonomická analýza v nariadení REACH
- Predkladanie dokumentácií harmonizovanej klasifikácie a označovania
- Klasifikácia zmesí
- Vystúpenie Spojeného kráľovstva z EÚ
- ECHA accounts and EU Login
- Kontrola úplnosti technickej dokumentácie
- Questions and answers
- ECHA CHEM
Formats and templates
REACH
You can download the forms and templates below, to be used in the context of REACH.
- Annex XV SVHC report template [DOCX] [EN]
- Report template annex [XLSX] [EN]
- Annex XV report format for restriction [DOCX]
(updated 24/06/2024) - Please note that an earlier document dealing with a "format for substance evaluation" has been replaced by the ECHA integrated quality management system (IQMS) document describing the procedure for substance evaluation
CLP
If you are a dossier submitter, the harmonised classification and labelling (CLH) template supports you to prepare proposals for CLH.
The template consists of two parts. The first contains:
- the identity of the substance
- proposed CLH
- a history of the previous classification and labelling
- justification that action is needed at Community level
- identified uses
- data sources
- physicochemical properties of the substance, and
- the hazard assessment by the dossier submitter
The second part, Annex I, contains:
- the detailed study summaries of the studies forming the basis of the CLH proposal
Using Annex I is not mandatory, but it can be used to provide more detailed information or confidential information.
- CLH report template (with explanations)
(updated 19/04/2023) - Template of Annex I to the CLH report (with explanations)
(updated 31/07/2023) - If your substance is a biocidal active substance and you prepare a proposal for CLH under CLP Regulation and a Competent Authority Report (CAR) under Biocidal Products Regulation (BPR) for (re)approval, the common template found under the BPR subsection should be used.
- If your substance is a plant protection product (PPP) active substance and you prepare a proposal for CLH under CLP Regulation and also an Assessment Report (AR) under PPP Regulation for (re)approval, the common template should be used.
- In other cases, the CLH report template provided at the top bullet point of the CLP section should be used.
BPR
- Combined CAR and CLH template (updated 04/01/2023)
This is a common report template intended to be used for Competent Authority Reports (CAR) submitted under BPR and CLH reports (Proposal for Harmonised Classification and Labelling) submitted under CLP Regulation. The template aligns the current structure of the CAR with the information to be included in the CLH report and, therefore, facilitates the alignment of the two processes, which is crucial for the decision on approval under BPR. It also aims to facilitate the work for the evaluating Competent Authority and the CLH dossier submitter and, by that, save time and resources. - Combined CAR and CLH template (including the new CLH hazard classes) (published 11/09/2023)
The European Commission has published a Delegated Regulation amending CLP Regulation which sets out new hazard classes and criteria for the classification and labelling. The new rules are in force as of 20 April 2023. From this day on, the Member States can refer to the new hazard classes and criteria when making proposals for harmonised classification and labelling. For this purpose a new combined CAR and CLH template including the new CLH hazard classes is available. - BPR PAR template_single product
- BPR PAR template_single product_confidential annex
- BPR PAR template_product family
- BPR PAR template_product family_confidential annex
- Instructions for PAR template and confidential annex
- Overview of PC tests
- Template used for 30 day commenting period
- Template for the reference specification
Weight of Evidence/Uncertainty Template
The template and background document for weight of evidence/uncertainty is intended for use in human health and environmental hazard assessments. It can assist to:
- harmonise the use of weight of evidence and uncertainty assessment within ECHA processes;
- increase transparency in regulatory decision making (REACH and CLP regulations and the BPR);
- facilitate the use and integration of alternative methods and all available information in hazard assessment.
The template contains instructions on what is expected under each section. It also provides links to the background document and to other relevant guidance documents.
WHO/IPCS Mode of Action Analysis Framework Templates
The following templates for mode of action analysis are based on the WHO/IPCS Mode of Action Framework and intended for use for both human health and/or environmental mode of action analysis. This framework provides a generic approach to the principles commonly used for evaluating mode of action. It outlines in a structured format the elements to be considered in analyzing whether available data support a particular mode of action.
- WHO/IPCS Templates Mode of Action Analysis (with instructions to relevant Guidance documents)
- WHO/IPCS Templates Mode of Action Analysis (clean version))
In order to import the mode of action analysis / human relevance framework in IUCLID related toxicological endpoint summaries, the user imports the template in html format in the corresponding text field in IUCLID available below.