Formats and templates
-
Podpora
- Prvi koraki
- Smernice
- Testne metode in njihove alternative
- Spletni seminarji
-
Orodja za predložitev dokumentacije
- Manuals
-
REACH-IT
- Postopek registracije
- V proizvod in proces usmerjene raziskave in razvoj (PPORD)
- Prijava snovi v izdelkih
- Predložitev obvestil nadaljnjih uporabnikov o dovoljenih uporabah
- Predložitev poročil nadaljnjih uporabnikov za nepodprte uporabe
- Predložitev poročil nadaljnjih uporabnikov za razlike v razvrstitvi
- Kako predložiti in posodobiti prijavo razvrstitve in označitve?
- Zahtevek za alternativno kemijsko ime snovi v zmeseh
- IUCLID
- CHESAR
- SPC
- R4BP 3
- ePIC
- Storitve v oblaku agencije ECHA
- Interact Portal
- EUSES
- System-to-system submission service
- Nacionalne službe za pomoč uporabnikom
- Praktični primeri scenarijev izpostavljenosti
- Praktični primeri poročil o kemijski varnosti
- Nadomestitev nevarnih kemikalij
- Mala in srednje velika podjetja (MSP)
- Priporočila registracijskim zavezancem
-
Faze registracije
- 1. Vaše obveznosti glede registracije
- 2. Poiščite soudeležene registracijske zavezance
- 3. Organizirajte se s soudeleženimi registracijskimi zavezanci
-
4. Ocena nevarnosti in tveganja
- Zahteve po informacijah: v količini od 1 do 10 ton na leto
- Zahteve po informacijah: v količini od 10 do 100 ton na leto
- Zahteve po informacijah: od 100 do 1 000 ton na leto
- Zahteve po informacijah: 1000 ton ali več na leto
- Prilagoditve standardnim zahtevam po informacijah
- Kako se izogniti nepotrebnemu testiranju na živalih
- Strategija zbiranja podatkov
- 5. Ustvarjanje svoje registracijske dokumentacije
- 6. Predložitev vaše registracijske dokumentacije
- 7. Kako se organizirati za posodobitev dokumentacije
- Identifikacija snovi
- Omejitev
-
Avtorizacija
- Identifikacija snovi, ki vzbujajo veliko zaskrbljenost
-
Kako predložiti vlogo za avtorizacijo?
- Ali vloga za avtorizacijo zadeva tudi vas?
- Pripravite strategijo glede predložitve vlog
- Začnite pripravljati svojo vlogo
- Obvestite agencijo ECHA in zaprosite za informativni sestanek pred predložitvijo vloge
- Dokončajte svojo vlogo
- Predložite svojo vlogo
- Vključite se v posvetovanja za oblikovanje mnenj
- Izpolnite svoje obveznosti
- Predložite poročilo o pregledu, če snov še vedno uporabljate
- Vprašajte agencijo ECHA o vlogah za avtorizacijo
- Socialno-ekonomska analiza v skladu z REACH
- Predložitev dokumentacije za usklajeno razvrstitev in označitev
- Razvrščanje zmesi
- Izstop Združenega kraljestva iz EU
- ECHA accounts and EU Login
- Preverjanje tehnične popolnosti
- Questions and answers
- ECHA CHEM
Formats and templates
REACH
You can download the forms and templates below, to be used in the context of REACH.
- Annex XV SVHC report template [DOCX] [EN]
- Report template annex [XLSX] [EN]
- Annex XV report format for restriction [DOCX]
(updated 24/06/2024) - Please note that an earlier document dealing with a "format for substance evaluation" has been replaced by the ECHA integrated quality management system (IQMS) document describing the procedure for substance evaluation
CLP
If you are a dossier submitter, the harmonised classification and labelling (CLH) template supports you to prepare proposals for CLH.
The template consists of two parts. The first contains:
- the identity of the substance
- proposed CLH
- a history of the previous classification and labelling
- justification that action is needed at Community level
- identified uses
- data sources
- physicochemical properties of the substance, and
- the hazard assessment by the dossier submitter
The second part, Annex I, contains:
- the detailed study summaries of the studies forming the basis of the CLH proposal
Using Annex I is not mandatory, but it can be used to provide more detailed information or confidential information.
- CLH report template (with explanations)
(updated 19/04/2023) - Template of Annex I to the CLH report (with explanations)
(updated 31/07/2023) - If your substance is a biocidal active substance and you prepare a proposal for CLH under CLP Regulation and a Competent Authority Report (CAR) under Biocidal Products Regulation (BPR) for (re)approval, the common template found under the BPR subsection should be used.
- If your substance is a plant protection product (PPP) active substance and you prepare a proposal for CLH under CLP Regulation and also an Assessment Report (AR) under PPP Regulation for (re)approval, the common template should be used.
- In other cases, the CLH report template provided at the top bullet point of the CLP section should be used.
BPR
- Combined CAR and CLH template (updated 04/01/2023)
This is a common report template intended to be used for Competent Authority Reports (CAR) submitted under BPR and CLH reports (Proposal for Harmonised Classification and Labelling) submitted under CLP Regulation. The template aligns the current structure of the CAR with the information to be included in the CLH report and, therefore, facilitates the alignment of the two processes, which is crucial for the decision on approval under BPR. It also aims to facilitate the work for the evaluating Competent Authority and the CLH dossier submitter and, by that, save time and resources. - Combined CAR and CLH template (including the new CLH hazard classes) (published 11/09/2023)
The European Commission has published a Delegated Regulation amending CLP Regulation which sets out new hazard classes and criteria for the classification and labelling. The new rules are in force as of 20 April 2023. From this day on, the Member States can refer to the new hazard classes and criteria when making proposals for harmonised classification and labelling. For this purpose a new combined CAR and CLH template including the new CLH hazard classes is available. - BPR PAR template_single product
- BPR PAR template_single product_confidential annex
- BPR PAR template_product family
- BPR PAR template_product family_confidential annex
- Instructions for PAR template and confidential annex
- Overview of PC tests
- Template used for 30 day commenting period
- Template for the reference specification
Weight of Evidence/Uncertainty Template
The template and background document for weight of evidence/uncertainty is intended for use in human health and environmental hazard assessments. It can assist to:
- harmonise the use of weight of evidence and uncertainty assessment within ECHA processes;
- increase transparency in regulatory decision making (REACH and CLP regulations and the BPR);
- facilitate the use and integration of alternative methods and all available information in hazard assessment.
The template contains instructions on what is expected under each section. It also provides links to the background document and to other relevant guidance documents.
WHO/IPCS Mode of Action Analysis Framework Templates
The following templates for mode of action analysis are based on the WHO/IPCS Mode of Action Framework and intended for use for both human health and/or environmental mode of action analysis. This framework provides a generic approach to the principles commonly used for evaluating mode of action. It outlines in a structured format the elements to be considered in analyzing whether available data support a particular mode of action.
- WHO/IPCS Templates Mode of Action Analysis (with instructions to relevant Guidance documents)
- WHO/IPCS Templates Mode of Action Analysis (clean version))
In order to import the mode of action analysis / human relevance framework in IUCLID related toxicological endpoint summaries, the user imports the template in html format in the corresponding text field in IUCLID available below.