Substance Information
Substance Information
Data platform availability banner - infocard, search, nanomaterias
REACH Registration data can be found in the new ECHA CHEM database. The old ‘Registered substance factsheets’ will be available on this web site during the transition period but have not been updated since 19 May 2023. More
![](/documents/10162/65869804/echa_chem_logo_300px.png/3ab52b86-2888-247f-9e2b-f08cff02c876?t=1704803484609)
Substance Infocard
Lead compounds
![Help Help](/o/echa-revamp-theme/images/gui/help.png)
The ‘Substance identity’ section is calculated from substance identification information from all ECHA databases. The substance identifiers displayed in the InfoCard are the best available substance name, EC number, CAS number and/or the molecular and structural formulas.
Some substance identifiers may have been claimed confidential, or may not have been provided, and therefore not be displayed.
EC (European Community) Number
The EC Number is the numerical identifier for substances in the EC Inventory. The EC Inventory is a combination of three independent European lists of substances from the previous EU chemicals regulatory frameworks (EINECS, ELINCS and the NLP-list). More information about the EC Inventory can be found here.
If the substance was not covered by the EC Inventory, ECHA attributes a list number in the same format, starting with the numbers 6, 7, 8 or 9.
The EC or list number is the primary substance identifier used by ECHA.
CAS (Chemical Abstract Service) registry number
The CAS number is the substance numerical identifier assigned by the Chemical Abstracts Service, a division of the American Chemical Society, to substances registered in the CAS registry database. A substance identified primarily by an EC or list number may be linked with more than one CAS number, or with CAS numbers that have been deleted. More information about CAS and the CAS registry can be found here.
Molecular formula
The molecular formula identifies each type of element by its chemical symbol and identifies the number of atoms of each element found in one discrete molecule of the substance. This information is only displayed if the substance is well–defined, its identity is not claimed confidential and there is sufficient information available in ECHA’s databases for ECHA’s algorithms to generate a molecular structure.
Molecular structure
The molecular structure is based on structures generated from information available in ECHA’s databases. If generated, an InChI string will also be generated and made available for searching. This information is only displayed if the substance is well-defined, its identity is not claimed confidential and there is sufficient information available in ECHA’s databases for ECHA’s algorithms to generate a molecular structure.
More help available here.
EC / List no.: -
CAS no.: -
Mol. formula:
![Help Help](/o/echa-revamp-theme/images/gui/help.png)
The ‘Hazard classification and labelling’ section shows the hazards of a substance based on the standardised system of statements and pictograms established under the CLP (Classification Labelling and Packaging) Regulation. The CLP Regulation makes sure that the hazards presented by chemicals are clearly communicated to workers and consumers in the European Union. The CLP Regulation uses the UN Global Harmonised System (GHS) and European Union Specific Hazard Statements (EUH).
This section is based on three sources for information (harmonised classification and labelling (CLH), REACH registrations and CLP notifications). The source of the information is mentioned in the introductory sentence of the hazard statements. When information is available in all sources, the first two are displayed as a priority.
Please note:
The purpose of the information provided under this section is to highlight the substance hazardousness in a readable format. It does not represent a new labelling, classification or hazard statement, neither reflect other factors that affect the susceptibility of the effects described, such as duration of exposure or substance concentration (e.g. in case of consumer and professional uses). Other relevant information includes the following:
- Substances may have impurities and additives that lead to different classifications. If at least one company has indicated that the substance classification is affected by impurities or additives, this will be indicated by an informative sentence. However, substance notifications in the InfoCard are aggregated independently of the impurities and additives.
- Hazard statements were adapted to improve readability and may not correspond textually to the hazard statements codes description in the European Union Specific Hazard Statements (EUH) or the UN Global Harmonised System (GHS).
To see the full list of notified classifications and to get more information on impurities and additives relevant to classification please consult the C&L Inventory.
More information about Classification and Labelling is available in the Regulations section of ECHA website.
More help available here.
Harmonised classification and labelling (CLH)
Harmonised classification and labelling is a legally binding classification and labelling for a substance, agreed at European Community level. Harmonisation is based on the substance’s physical, toxicological and eco-toxicological hazard assessment.
The ‘Hazard classification’ and labelling section uses the signal word, pictogram(s) and hazard statements of the substance under the harmonised classification and labelling (CLH) as its primary source of information.
If the substance is covered by more than one CLH entry (e.g. disodium tetraborate EC no. 215–540–4, is covered by three harmonisations: 005–011–00–4; 005–011–01–1 and 005–011–02–9), CLH information cannot be displayed in the InfoCard as the difference between the CLH classifications requires manual interpretation or verification. If a substance is classified under multiple CLH entries, a link to the C&L Inventory is provided to allow users to view CLH information associated with the substance and no text is automatically generated for the InfoCard.
It is possible that a harmonisation is introduced through an amendment to the CLP Regulation. In that case, the ATP (Adaptation to Technical Progress) number is displayed.
More info on CLH can be found here.
Classification and labelling under REACH
If available, additional information on classification and labelling (C&L) is derived from REACH registration dossiers submitted by industry. This information has not been reviewed or verified by ECHA, and may change without prior notice. REACH registration dossiers have greater data requirements (such as supporting studies) than do notifications under CLP.
Notifications under the Classification Labelling and Packaging (CLP) Regulation
If no EU harmonised classification and labelling exists and the substance was not registered under REACH, information derived from classification and labelling (C&L) notifications to ECHA under CLP Regulation is displayed under this section. These notifications can be provided by manufacturers, importers and downstream users. ECHA maintains the C&L Inventory, but does not review or verify the accuracy of the information.
Note that for readability purposes, only the pictograms, signal words and hazard statements referred in more than 5% of the notifications under CLP are displayed.
There is no harmonised classification and there are no notified hazards by manufacturers, importers or downstream users for this substance.
![Help Help](/o/echa-revamp-theme/images/gui/help.png)
This section highlights four regulatory activities or outcomes under REACH – Registration, Evaluation, Authorisation and Restriction of Chemicals – Regulation (EC) No 1907/2006:
- Community rolling action plan - indicates if the substance is or was included in the Community rolling action plan (CoRAP). The CoRAP list includes substances that could pose a risk to human health or the environment and whose (potentially hazardous) properties are to be evaluated by the Member States in the next three years. After evaluation, proposals may be made for further regulatory action regarding the substance.
- Candidate List - indicates if the substance is included in the candidate list of substances of very high concern (SVHCs). The Candidate List includes substances that are subject to additional protocols and reporting obligations and which may eventually be included in the Authorisation List, further limiting their use.
- Authorisation list (Annex XIV to REACH) - indicates if the substance is included in the Authorisation list. These substances cannot be placed on the market or used after a given date, unless an authorisation is granted for their specific use, or the use is exempted from authorisation.
- Restriction list (Annex XVII to REACH) - indicates if the substance is included in the Restriction List. The Restriction List describes the conditions for the manufacture, placing on the market or use of certain substances, either on their own or in mixtures or articles.
Please note: The identification of relevant regulatory activities and outcomes is done automatically and without manual verification. Substances may be grouped together under a specific regulatory activity for more efficient risk management and legislative processing (e.g. restriction on "Lead and its compounds"). In these cases, Infocards may not identify all substances in the group.Therefore it does not represent official and legally–binding information. To confirm if a substance is covered by a specific regulatory action the official publication, e.g. the electronic edition of the Official Journal of the European Union should be consulted.
More help available here.
- Some uses of this substance are restricted under Annex XVII of REACH.
The InfoCard summarises the non-confidential data of a substance held in the databases of the European Chemicals Agency (ECHA). InfoCards are generated automatically based on the data available at the time of generation.
The quality and correctness of the information submitted to ECHA remains the responsibility of the data submitter. The type of uses and classifications may vary between different submissions to ECHA and for a full understanding it is recommended to consult the source data. Information on applicable regulatory frameworks is also automatically generated and may not be complete or up to date. It is the responsibility of the substance manufacturers and importers to consult official publications, e.g. the electronic edition of the Official Journal of the European Union.
InfoCards are updated when new information is available. The date of the last update corresponds to the publication date of the InfoCard and not necessarily to the date in which the update occurred in the source data.
More help available here.
![HELP HELP](https://echa.europa.eu/o/echa-revamp-theme/images/gui/help.png)
Regulatory context
Here you can find all of the regulations and regulatory lists in which this substance appears, according to the data available to ECHA. This substance has been found in the following regulatory activities (directly, or inheriting the regulatory context of a parent substance):
- ECHA Legislations
- Occupational Exposure limits (OELs)
- Emission Limit Values (ELVs)
- Other chemical legislations
-
Substances assessed for potential regulatory needs.
-
PACT - Public activities Co-ordination ToolPublic (risk management) activities co-ordination tableTool showing an overview of substances in various key regulatory processes that authorities are working on.
-
-
Region | Legislation | Emission medium | Process/equipment | Maximum emissions | Average emissions | Notes | |||
---|---|---|---|---|---|---|---|---|---|
Maximum limit | Maximum sampling duration | Average limit | Average sampling duration | ||||||
European Union | Industrial Emissions Directive | Waste gases | Combustion plants co-incinerating waste | 0.5 mg/Nm3 | 8.0 h | These average values cover also the gaseous and the vapour forms of the relevant heavy metal emissions as well as their compounds Emission limit value defined as total emission limit for the total sum of antimony arsenic lead chromium cobalt copper manganese nickel and vanadium expressed as average value over the sampling period All emission limit values shall be calculated at a temperature of 27315 K a pressure of 1013 kPa and after correcting for the water vapour content of the waste gases O2 content 6% for solid fuels and 3% for liquid fuels For technical provisions regarding 'Monitoring of emissions' see Part 6 (Annex VI). For 'Formula to calculate the emission concentration at the standard percentage oxygen concentration' see Part 7 (Annex VI). For 'Assessment of compliance with emission limit values' see Part 8 (Annex VI) Directive 2010/75/EU | |||
European Union | Industrial Emissions Directive | Waste gases | Cement kilns co-incinerating waste | 0.5 mg/Nm3 | 8.0 h | These average values cover also the gaseous and the vapour forms of the relevant heavy metal emissions as well as their compounds Emission limit value defined as total emission limit for the total sum of antimony arsenic lead chromium cobalt copper manganese nickel and vanadium expressed as average value over the sampling period All values are standardised at 10 % oxygen All emission limit values shall be calculated at a temperature of 27315 K a pressure of 1013 kPa and after correcting for the water vapour content of the waste gases For technical provisions regarding 'Monitoring of emissions' see Part 6 (Annex VI). For 'Formula to calculate the emission concentration at the standard percentage oxygen concentration' see Part 7 (Annex VI). For 'Assessment of compliance with emission limit values' see Part 8 (Annex VI) Directive 2010/75/EU | |||
European Union | Industrial Emissions Directive | Waste gases | Waste incineration plants | 0.5 mg/Nm3 | 8.0 h | All emission limit values shall be calculated at a temperature of 27315 K a pressure of 1013 kPa and after correcting for the water vapour content of the waste gases.They are standardised at 11 % oxygen in waste gas except in case of incineration of mineral waste oil as defined in point 3 of Article 3 of Directive 2008/98/EC when they are standardised at 3 % oxygen and in the cases referred to in Point 2.7 of Part 6 These average values cover also the gaseous and the vapour forms of the relevant heavy metal emissions as well as their compounds Emission limit value defined as total emission limit for the total sum of antimony arsenic lead chromium cobalt copper manganese nickel and vanadium expressed as average value over the sampling period For technical provisions regarding 'Monitoring of emissions' see Part 6 (Annex VI). For 'Formula to calculate the emission concentration at the standard percentage oxygen concentration' see Part 7 (Annex VI). For 'Assessment of compliance with emission limit values' see Part 8 (Annex VI) Directive 2010/75/EU | |||
European Union | Industrial Emissions Directive | Waste water from the cleaning of waste gases | Waste incineration plants and waste co-incineration plants | 0.2 mg/l | |||||
European Union | Water Environmental Quality Standards Directive | Inland surface waters | 14.0 µg/l | 1.2 µg/l | 1.0 yr | Unless otherwise specified the EQS parameter expressed as an annual average value (AA-EQS) applies to the total concentration of all isomers. Inland surface waters encompass rivers and lakes and related artificial or heavily modified water bodies. These EQS refer to bioavailable concentrations of the substances. | |||
European Union | Water Environmental Quality Standards Directive | Surface waters other than inland surface waters | 14.0 µg/l | 1.3 µg/l | 1.0 yr | Unless otherwise specified the EQS parameter expressed as an annual average value (AA-EQS) applies to the total concentration of all isomers. Inland surface waters encompass rivers and lakes and related artificial or heavily modified water bodies. These EQS refer to bioavailable concentrations of the substances. |
-
Batteries Directive - Prohibitions & LabellingEU. Prohibited Substances (Article 4) & Labelling Requirements (Article 21(3)), Directive 2006/66/EC on Batteries and Accumulators, 26 September 2006, as amended by Directive 2018/849/EU, 14 June 2018
-
Batteries Regulation - Prohibitions and LabellingEU. Prohibited Substances (Annex I) & Labeling Requirements (Art. 13(5) and Annex VI) for batteries, Regulation (EU) 2023/1542, OJ L 191, 28 July 2023
This database contains: 1/use prohibitions of mercury, cadmium, and lead in batteries; and 2/ labeling requirements for cadmium and lead, other hazardous substances (non-exhaustive list derived from CLP Regulation (EC) No 1272/2008, Annex VI, Table 3) and critical raw materials (derived from 4th List of Critical Raw Materials, 2020) in batteries. The list is based on the new Batteries Regulation (EU) 2023/1542 which became enforceable on 18 February 2024, with some transitional periods.
-
CAD - Chemical Agents Directive, Annex II - Binding BLVsEU. Directive 98/24/EC, Annex II, Binding Biological Limit Values and Health Surveillance Measures, as amended by Directive (EU) 2024/869, OJ L of 19 March 2024
This list contains substances assigned a binding biological exposure limit (BEL) by the European Union. National BELs for these substances may not deviate from the limits in the Directive. Annex II contains the binding BEL for lead which will be deleted from CAD, Annex II and, starting 9 April 2026, will be regulated only in the CMR Directive, Annex IIIa.
-
CMRD - Carcinogens, Mutagens, Reprotoxins Directive, Annex IIIa - BLVsEU. BLVs for Certain Hazardous Substances: Annex IIIa, Directive (EC) 2004/37 (CMRD), as amended by Directive (EU) 2024/869, OJ L of 19 March 2024
This list contains substances assigned a binding occupational exposure limit value (OELV) by the European Union. National OELVs for these substances may not deviate from the limits in the Directive. Annex I contains the binding OELV for lead which will be deleted from CAD, Annex I and, starting 9 April 2026, will be regulated only in the CMR Directive, Annex III.
-
Construction Product Regulation - Annex I (3) - Hazardous SubstancesEU. Hazardous Substances for Purposes of Annex I (3) (Requirements for Construction Works), Regulation 305/2011/EU on Marketing of Construction Products, amended by Regulation 574/2014/EU, 28 May 2014
This list contains a non-exhaustive inventory of substances taken from: (1) Table 3 of Annex VI to CLP; (2) the Candidate List of SVHCs; (3) Annex XIV of REACH (Authorisation List); (4) Annex XVII of REACH (Restrictions List); (5) F-gases subject to emission limits/reporting per Regulation 517/2014/EU; and (6) volatile organic compounds (VOCs) listed in the Ambient Air Directive 2008/50/EC. The basis of the list is Annex I(3) of the Construction Products Regulation 305/2011/EC, which stipulates that construction works must not have a high impact on human health or the environment as a result of: giving off toxic gas; emissions of dangerous substances, volatile organic compounds (VOC), greenhouse gases or dangerous particles into indoor or outdoor air; release of dangerous substances into drinking water, ground water, marine waters, surface waters or soil.
-
Cosmetic Products Regulation, Annex II - Prohibited SubstancesEU. Prohibited Substances: Annex II, Regulation 1223/2009/EC on Cosmetic Products, as amended by Regulation (EU) 2024/996, OJ L of 4 April 2024
-
End-of-Life Vehicles Directive - General Use ExemptionsEU. General Use Exemptions from Article 4(2)(a) (Annex II), Directive 2000/53/EC on End-of-Life Vehicles, as amended by Directive 2020/363/EU, 5 March 2020
-
End-of-Life Vehicles Directive - Specific Use ExemptionsEU. Specific Use Exemptions from Article 4(2)(a) (Annex II), Directive 2000/53/EC on End-of-Life Vehicles, as amended by Commission Delegated Directive (EU) 2023/544, OJ L 73, 10 March 2023
-
General Product Safety Directive - Hazardous SubstancesEU. Hazardous Substances for Purposes of General Product Safety Directive (2001/95/EC), 15 January 2002, amended by Reg 596/2009/EC, 18 July 2009
This list contains a non-exhaustive inventory of substances that fall within the European Union's hazardous substance definitions, as provided on: (1) Table 3 of Annex VI to the CLP Regulation 1272/2008/EC; (2) Annex III of Directive 2000/54/EC (Biological Agents); Candidate List of SVHCs; and REACH Annexes XIV and XVII (Authorisation and Restriction lists). They can be considered hazardous for purposes of the General Product Safety Directive 2001/95/EC.
-
IPPC - Industrial Emissions Directive, Annex II - Polluting SubstancesEU. Polluting Substances: Annex II, Directive 2010/75/EU on Industrial Emissions (IPPC), 17 December 2010
This list contains the polluting substances for which emission limit values are assigned under Directive 2010/75/EU on Industrial Emissions (Integrated Pollution Prevention and Control - IPPC). Member States must permit all qualifying facilities in order to ensure that they minimize impact on the environment. The permit issued must provide emission limit values for pollutants on this list.
-
IPPC, Annexes V, VI, VIII - Provisions relating to industrial plantsEU. Emission Limit Values: Annexes V (combustion plants), VI (waste incineration/co-incineration plants), VIII (TiO2 installations), Dir. 2010/75/EU on Industrial Emissions (IPPC), 17 December 2010
This list contains emission limit values for polluting substances in waste gases and waste water, assigned according to facility type (i.e., combustion plants (Annex V), waste incineration/co-incineration plants (Annex VI), and installations producing titanium dioxide (Annex VIII)), under Directive 2010/75/EU on Industrial Emissions (Integrated Pollution Prevention and Control - IPPC). For this list, if a substance presents 2 values in the ''Average sampling duration'' field, these indicate minimum and maximum average sampling period.
-
ROHS - Exemptions from Article 4(1) Restrictions, Annexes III & IVEU. Exemptions from Art. 4(1) Restrictions (Annexes III & IV), Directive 2011/65/EU (RoHS), as amended by Commission Delegated Directive (EU) 2024/1416, OJ L of 21 May 2024
This list contains the application exemptions listed in Annexes III and IV to RoHS (2011/65/EU). Annex III contains applications exempted from the restriction in Article 4(1), while Annex IV lists applications exempted from the restriction in Article 4(1) specific to medical devices and monitoring and control instruments.
-
ROHS Directive - Restricted Substances as per Article 4(1), Annex IIEU. Restricted Substances Referred to in Article 4(1) (Annex II), Directive 2011/65/EU (RoHS), as amended by Directive 2015/863/EU, 4 June 2015
This list contains the substances listed in Annex II to the Directive on the restriction of hazardous substances in electrical and electronic equipment (RoHS - 2011/65/EU). Restricted per Art. 4(1) of RoHS, each listed substance includes a maximum concentration value tolerated by weight in homogeneous materials.
-
Toy Safety Directive - Substances Restricted in ToysEU. Substances Restricted in Toys, Directive 2009/48/EC, OJ L 170/1, 30 June 2009, last amended by Directive (EU) 2021/903, 4 June 2021
This list contains substances whose use in toys is restricted in the European Union in accordance with points 8 and 13, Part III, and Appendices A and C of Annex II (Particular Safety Requirements) to Directive 2009/48/EC on toy safety. List entries include substance name, CAS number, limit values for certain product types and, where applicable, notes on restrictions.
-
Annex I, Part A - Priority Substances & Pollutants in waterEU. Environmental Quality Standards (EQS) for Priority Substances: Annex I, Part A, Directive 2008/105/EC, 24 December 2008, amended by Directive 2013/39/EU, 24 August 2013
This list contains environmental quality standards (EQS), including annual averages and maximum allowable concentrations, for priority substances and certain other pollutants, as provided for in Article 16 of Directive 2000/60/EC establishing a framework for Community action in the field of water policy.
-
Water Framework Directive, Annex X - Priority SubstancesEU. Annex X to Directive 2000/60/EC, Priority Substances in the Field of Water Policy, as amended by Directive 2013/39/EU, OJ L 226/1, 24 August 2013
![Help Help](https://echa.europa.eu/o/echa-revamp-theme/images/gui/help.png)
Substance names and other identifiers
![Help Help](https://echa.europa.eu/o/echa-revamp-theme/images/gui/help.png)
This entry / group of substance has the following member substances:
Name | EC / List no. | CAS no. | Association |
---|---|---|---|
Lead bis(4-cyclohexylbutyrate) | 263-663-7 | 62637-99-4 | Official source |
Calcines, lead-zinc ore conc.
A thermally agglomerated substance formed by heating a mixture of metal sulfide concentrates, limestone, sand, furnace dross, miscellaneous zinc, lead and copper bearing materials, together with already roasted material to a temperature of 1000°C to 1200°C (538°F to 649°F).
|
305-411-1 | 94551-62-9 | Official source |
Fatty acids, C16-18, lead salts | 292-966-7 | 91031-62-8 | Official source |
Slags, lead-zinc smelting
Substance formed by processing of chiefly oxidic material with lead and zinc content in a rotating furnace. Consists primarily of Al2O3, CaO, Fe, FeO and SiO2 with other nonferrous compounds as well as carbon.
|
297-907-9 | 93763-87-2 | Official source |
Lead hexafluorosilicate | 247-278-1 | 25808-74-6 | Official source |
Lead dibromate | 251-796-3 | 34018-28-5 | Official source |
Orthoboric acid, lead(2+) salt | 252-594-8 | 35498-15-8 | Official source |
Lead di(acetate) | 206-104-4 | 301-04-2 | Official source |
Lead bis(2-ethylhexanoate) | 206-107-0 | 301-08-6 | Official source |
Trilead dicitrate | 208-141-1 | 512-26-5 | Official source |
Lead disalicylate | 239-839-4 | 15748-73-9 | Official source |
Lead dipalmitate | 239-870-3 | 15773-56-5 | Official source |
Lead hydrogenorthophosphate | 239-952-9 | 15845-52-0 | Official source |
Lead phosphite | 240-176-8 | 16038-76-9 | Official source |
2-ethylhexanoic acid, lead salt | 241-076-7 | 16996-40-0 | Official source |
Bis(diethyldithiocarbamato-S,S')lead | 241-534-6 | 17549-30-3 | Official source |
Cyclo-di-μ-oxo(μ-phthalato)trilead | 241-894-4 | 17976-43-1 | Official source |
Dilead chromate oxide | 242-339-9 | 18454-12-1 | Official source |
Lead dilactate | 242-666-7 | 18917-82-3 | Official source |
Lead bis(dimethyldithiocarbamate) | 242-748-2 | 19010-66-3 | Official source |
Lead thiosulphate | 236-780-6 | 13478-50-7 | Official source |
Diantimony trilead octaoxide | 236-845-9 | 13510-89-9 | Official source |
Lead diperchlorate | 237-125-7 | 13637-76-8 | Official source |
Lead bis(tetrafluoroborate) | 237-486-0 | 13814-96-5 | Official source |
Lead(2+) tellurium tetraoxide | 237-573-3 | 13845-35-7 | Official source |
Citric acid, lead salt | 238-432-9 | 14450-60-3 | Official source |
Lead metaborate | 238-762-3 | 14720-53-7 | Official source |
Lead 2,4,6-trinitro-m-phenylene dioxide | 239-290-0 | 15245-44-0 | Official source |
Bis(pentane-2,4-dionato-O,O')lead | 239-323-9 | 15282-88-9 | Official source |
Lauric acid, lead salt | 239-344-3 | 15306-30-6 | Official source |
Lead tin trioxide | 234-844-8 | 12036-31-6 | Official source |
Lead oxide sulfate | 234-853-7 | 12036-76-9 | Official source |
Lead titanium trioxide | 235-038-9 | 12060-00-3 | Official source |
Lead zirconium trioxide | 235-039-4 | 12060-01-4 | Official source |
Pentalead tetraoxide sulphate | 235-067-7 | 12065-90-6 | Official source |
Lead selenide | 235-109-4 | 12069-00-0 | Official source |
Trilead dioxide phosphonate | 235-252-2 | 12141-20-7 | Official source |
Tetralead trioxide sulphate | 235-380-9 | 12202-17-4 | Official source |
Antimony, compound with lead (1:1) | 235-536-6 | 12266-38-5 | Official source |
Dioxobis(stearato)trilead | 235-702-8 | 12578-12-0 | Official source |
Lead titanium zirconium oxide | 235-727-4 | 12626-81-2 | Official source |
Lead bis(2,4-dihydroxybenzoate) | 255-375-5 | 41453-50-3 | Official source |
Acetic acid, lead salt, basic | 257-175-3 | 51404-69-4 | Official source |
Dioxobis(stearato)dilead | 260-043-8 | 56189-09-4 | Official source |
Lead hydroxide | 243-310-3 | 19783-14-3 | Official source |
Lead 2,4-dihydroxybenzoate | 244-118-2 | 20936-32-7 | Official source |
Disodium lead N,N'-ethylenebis[N-(carboxylatomethyl)aminoacetate] | 245-314-0 | 22904-40-1 | Official source |
Lead diformate | 212-371-8 | 811-54-1 | Official source |
Lead oxalate | 212-413-5 | 814-93-7 | Official source |
Lead tartrate | 212-426-6 | 815-84-9 | Official source |
Lead(2+) acrylate | 212-760-2 | 867-47-0 | Official source |
Lead dibenzoate | 212-841-2 | 873-54-1 | Official source |
Chlorotriethylplumbane | 213-925-1 | 1067-14-7 | Official source |
Hexaphenyldiplumbane | 221-505-4 | 3124-01-4 | Official source |
Lead(2+) methacrylate | 213-949-2 | 1068-61-7 | Official source |
Lead distearate | 214-005-2 | 1072-35-1 | Official source |
Chlorotriphenylplumbane | 214-572-6 | 1153-06-6 | Official source |
Lead dioxide | 215-174-5 | 1309-60-0 | Official source |
Orange lead | 215-235-6 | 1314-41-6 | Official source |
Lead sulphide | 215-246-6 | 1314-87-0 | Official source |
Lead telluride | 215-247-1 | 1314-91-6 | Official source |
Lead monoxide | 215-267-0 | 1317-36-8 | Official source |
Trilead bis(carbonate) dihydroxide | 215-290-6 | 1319-46-6 | Official source |
Lead, bis(acetato-O)tetrahydroxytri- | 215-630-3 | 1335-32-6 | Official source |
Lead sulfochromate yellow
This substance is identified in the Colour Index by Colour Index Constitution Number, C.I. 77603.
|
215-693-7 | 1344-37-2 | Official source |
Tetrabutylplumbane | 217-649-2 | 1920-90-7 | Official source |
Diphenyllead dichloride | 218-325-3 | 2117-69-3 | Official source |
Lead tetraacetate | 208-908-0 | 546-67-8 | Official source |
Lead dicyanide | 209-742-1 | 592-05-2 | Official source |
Lead dithiocyanate | 209-774-6 | 592-87-0 | Official source |
Tetraphenyllead | 209-871-3 | 595-89-1 | Official source |
Lead dibromide | 233-084-4 | 10031-22-8 | Official source |
Lead dinitrate | 233-245-9 | 10099-74-8 | Official source |
Lead(2+) silicate | 233-246-4 | 10099-76-0 | Official source |
Lead divanadium hexaoxide | 233-248-5 | 10099-79-3 | Official source |
Lead diiodide | 233-256-9 | 10101-63-0 | Official source |
Lead molybdate | 233-459-2 | 10190-55-3 | Official source |
Lead diphosphinate | 233-664-7 | 10294-58-3 | Official source |
Silicic acid, chromium lead salt | 234-347-6 | 11113-70-5 | Official source |
Silicic acid, lead salt | 234-363-3 | 11120-22-2 | Official source |
Trilead diarsenate | 222-979-5 | 3687-31-8 | Official source |
Acetoxytrimethylplumbane | 227-200-2 | 5711-19-3 | Official source |
Lead dipicrate | 229-335-2 | 6477-64-1 | Official source |
Stearic acid, lead salt | 231-068-1 | 7428-48-0 | Official source |
Lead sulphite | 231-196-8 | 7446-10-8 | Official source |
Lead sulphate | 231-198-9 | 7446-14-2 | Official source |
Lead selenate | 231-199-4 | 7446-15-3 | Official source |
Trilead bis(orthophosphate) | 231-205-5 | 7446-27-7 | Official source |
Lead dichloride | 231-845-5 | 7758-95-4 | Official source |
Lead chromate | 231-846-0 | 7758-97-6 | Official source |
Lead tungsten tetraoxide | 231-849-7 | 7759-01-5 | Official source |
Lead difluoride | 231-998-8 | 7783-46-2 | Official source |
Lead(IV) fluoride | 232-012-9 | 7783-59-7 | Official source |
Lead hydrogen arsenate | 232-064-2 | 7784-40-9 | Official source |
Pyrochlore, antimony lead yellow
This substance is identified in the Colour Index by Colour Index Constitution Number, C.I. 77588.
|
232-382-1 | 8012-00-8 | Official source |
Lead chromate molybdate sulfate red
This substance is identified in the Colour Index by Colour Index Constitution Number, C.I. 77605.
|
235-759-9 | 12656-85-8 | Official source |
Lead(2+) 2,4-dinitroresorcinolate | 236-498-3 | 13406-89-8 | Official source |
Lead diazide | 236-542-1 | 13424-46-9 | Official source |
bis(2,2,6,6-tetramethyl-3,5-heptanedionato)lead(II) | 621-125-2 | 21319-43-7 | Official source |
lead(II) perchlorate trihydrate | 638-754-3 | 13453-62-8 | Official source |
Flue dust, lead-refining
By-product of refining lead ores obtained from baghouse and electro-static precipitator and as slurry from scrubbers.
|
273-809-1 | 69029-67-0 | Official source |
Naphthenic acids, lead salts | 263-109-4 | 61790-14-5 | Official source |
Sulfurous acid, lead salt, dibasic | 263-467-1 | 62229-08-7 | Official source |
Plumbate(1-), triiodo-, hydrogen | - | 43629-00-1 | Official source |
cesium lead tribromide | 835-536-1 | 15243-48-8 | Official source |
Plumbate(1-), triiodo-, hydrogen, compd. with N,N-dimethylformamide and methanamine (1:1:1:1) | 836-029-8 | 2101242-86-6 | Official source |
Plumbate(1-), triiodo-, hydrogen, compd. with methanimidamide (1:1:1) | - | 1451592-07-6 | Official source |
Leach residues, zinc ore, lead-contg.
Insoluble substance obtained during dissolution of zinc ores or concentrate in sulfuric acid for the production of zinc sulfate solutions after physical separation such as flotation and filtration.
|
293-314-4 | 91053-49-5 | Expert judgement (ECHA) |
Lead, dross | 273-796-2 | 69029-52-3 | Expert judgement (ECHA) |
Lead carbonate | 247-054-3 | 25510-11-6 | Expert judgement (ECHA) |
Frits, chemicals
Frit is a mixture of inorganic chemical substances produced by rapidly quenching a molten, complex combination of materials, confining the chemical substances thus manufactured as nonmigratory components of glassy solid flakes or granules. This category includes all of the chemical substances specified below when they are intentionally manufactured in the production of frit. The primary members of this category are oxides of some or all of the elements listed below. Fluorides of these elements may also be included in combination with these primary substances.@Aluminum@Manganese@Antimony@Molybdenum@Arsenic@Neodymium@Barium@Nickel@Bismuth@Niobium@Boron@Phosphorus@Cadmium@Potassium@Calcium@Silicon@Cerium@Silver@Chromium@Sodium@Cobalt@Strontium@Copper@Tin@Gold@Titanium@Iron@Tungsten@Lanthanum@Vanadium@Lead@Zinc@Lithium@Zirconium@Magnesium
|
266-047-6 | 65997-18-4 | Expert judgement (ECHA) |
Lead cyanamidate | 244-073-9 | 20837-86-9 | Expert judgement (ECHA) |
Lead silicate | 245-090-4 | 22569-74-0 | Expert judgement (ECHA) |
Lead oxide | 215-626-1 | 1335-25-7 | Expert judgement (ECHA) |
Lead carbonate | 209-943-4 | 598-63-0 | Expert judgement (ECHA) |
Lead phthalate | 229-927-0 | 6838-85-3 | Expert judgement (ECHA) |
lead compounds with the exception of those specified elsewhere in this Annex | - | - | Expert judgement (ECHA) |
Lead, bullion | 308-011-5 | 97808-88-3 | Expert judgement (ECHA) |
Lead(II) bis(methanesulfonate)
BLEIMETHANSULFONAT; LEAD (II) METHANESULFONATE; LEAD METHANE SULPHONATE; LEAD SALT FP
|
401-750-5 | 17570-76-2 | Expert judgement (ECHA) |
Slimes and Sludges, zinc sulfate electrolytic
Product resulting from cleaning anodes and electrolyzing cells in an electrolytic zinc plant with zinc sulfate. Consists primarily of oxides of lead and manganese and calcium sulfate.
|
273-742-8 | 69012-43-7 | Expert judgement (ECHA) |
Leach residues, zinc ore-calcine
By-product of leaching calcined zinc ore concentrates with sulfuric acid. Consists primarily of lead sulfate with other calcium and iron salts and SiO2.
|
273-766-9 | 69012-70-0 | Expert judgement (ECHA) |
Lead, dross, antimony-rich
A scum or slag formed on the surface of molten lead during the process of removing antimony along with arsenic by oxidation with air. It consists of antimony, arsenic and lead oxides.
|
273-791-5 | 69029-45-4 | Expert judgement (ECHA) |
Lead(II) acetate trihydrate | 612-031-2 | 6080-56-4 | Expert judgement (ECHA) |
![Help Help](https://echa.europa.eu/o/echa-revamp-theme/images/gui/help.png)
This substance has been identified as member of the following groups of substances:
Name | EC / List no. | CAS no. | Association |
---|---|---|---|
Lead and its compounds | - | - | Expert judgement (ECHA) |