legislation-obligation

Substance Regulatory Obligations

OBL

Electrical and electronic assemblies: Electronic assemblies consisting only of metals or alloys; Waste electrical and electronic assemblies or scrap (including printed circuit boards) not containing components such as accumulators and other batteries included on list A, mercury-switches, glass from cathode-ray tubes and other activated glass and PCB-capacitors, or not contaminated with Annex I constituents (e.g. cadmium, mercury, lead, polychlorinated biphenyl) or from which these have been removed, to an extent that they do not possess any of the characteristics contained in Annex III; Electrical and electronic assemblies (including printed circuit boards, electronic components and wires) destined for direct reuse and not for recycling or final disposal

EC number: -

CAS number: -

Last updated: 21/09/2021
Print this Substance Regulatory Obligations Print Substance Regulatory Obligations
Expand all Collapse all
ECHA Legislation Regulatory Obligations

Regulatory obligations may exist for this substance under the legislations under ECHA’s remit or for which ECHA has delegated tasks (i.e. REACH, CLP, BPR, PIC, CAD / CMD, WFD, and POPs). Please check the substance Infocard.

About
Shipments of Waste Regulation

Shipments of Waste Regulation - Annexes III, IIIA, IIIB, IV and V

RESTRICTION

This list contains the entries on the following Annexes to the Shipments of Waste Regulation 1013/2006/EC: III, IIIA, IIIB - lists of waste subject to the general information requirements laid down in Art. 18 ('Green Listed Waste'); IV - list of waste subject to prior written notification and consent ('Amber Listed Waste'); and V - list of waste subject to export ban per Art. 36.

Name CAS Class Part OECD Code Basel Waste Code HS Code Hazardous Annex Basel Convention Related Entry Notes  
Electrical and electronic assemblies: Electronic assemblies consisting only of metals or alloys; Waste electrical and electronic assemblies or scrap (including printed circuit boards) not containing components such as accumulators and other batteries included on list A, mercury-switches, glass from cathode-ray tubes and other activated glass and PCB-capacitors, or not contaminated with Annex I constituents (e.g. cadmium, mercury, lead, polychlorinated biphenyl) or from which these have been removed, to an extent that they do not possess any of the characteristics contained in Annex III; Electrical and electronic assemblies (including printed circuit boards, electronic components and wires) destined for direct reuse and not for recycling or final disposal
B1 METAL AND METAL BEARING WASTES
V-1B Part 1, List B: Wastes which are not covered by Article 1(1)(a) of the Basel Convention, and therefore not covered by the export prohibition
B1110
Annex IX to the Basel Convention
A1180
1 Annex V applies without prejudice to Directives 91/689/EEC and 2006/12/EC.
2 Annex V consists of three parts, Parts 2 and 3 of which apply only when Part 1 is not applicable.
3 Wastes listed in List B of Annex V Part 1 or which are among the non-hazardous waste listed in Annex V Part 2 (i.e. wastes not marked with an asterisk) are covered by the export prohibition if they are contaminated by other materials to an extent which (a) increases the risks associated with the waste sufficiently to render it appropriate for submission to the procedure of prior written notification and consent, when taking into account the hazardous characteristics listed in Annex III to Directive 91/689/EEC; or (b) prevents the recovery of the waste in an environmentally sound manner.
note1 References in Lists A and B to Annexes I, III and IV refer to Annexes of the Basel Convention.
note3 This entry does not include scrap assemblies from electric power generation.
note10 Re-use can include repair, refurbishment or upgrading, but not major reassembly.
note11 In some countries these materials destined for direct re-use are not considered wastes.
note19 The part of Basel entry B1100 that refers to 'Slags from copper processing' etc., does not apply to Annex III, Part I and (OECD) entry GB040 in Part II (Annex III) applies instead. Basel entry B1110 does not apply to Annex III Part I, and (OECD) entries GC010 and GC020 in Part II (Annex III) apply instead.
 Details