Substance Information

NB: Registration status and tonnage

  • The REACH Registered substance portal was updated on 9th November 2020; the REACH registered factsheets were further updated on 21st December 2020. Details of the improvements can be found at Dissemination Platform Updates. Reprocessing the entire dataset is ongoing since 21 December 2020. ECHA is making all possible efforts to synchronise the registration status and tonnage with the shortest delay.
  • While reprocessing is ongoing please note that substances whose registration dossiers are not yet processed can incorrectly state in the Infocard that they are not registered under REACH. In these cases if there is a link to a REACH registered substance factsheet then the substance IS registered. The correct total tonnage band can be found in the factsheet(s) for the substance.

Disodium oxide

EC / List no.: 215-208-9

CAS no.: 1313-59-3

Mol. formula: Na2O

formula

Danger! According to the classification provided by companies to ECHA in REACH registrations this substance causes severe skin burns and eye damage.

This substance is registered under the REACH Regulation and is manufactured in and / or imported to the European Economic Area, at ≥ 10 to < 100 tonnes per annum.

This substance is used by consumers, in articles, by professional workers (widespread uses), in formulation or re-packing, at industrial sites and in manufacturing.

This substance is used by consumers, in articles, by professional workers (widespread uses), in formulation or re-packing, at industrial sites and in manufacturing.

Consumer Uses

This substance is used in the following products: metals and welding & soldering products.
Other release to the environment of this substance is likely to occur from: indoor use and outdoor use resulting in inclusion into or onto a materials (e.g. binding agent in paints and coatings or adhesives).

Article service life

Release to the environment of this substance can occur from industrial use: industrial abrasion processing with low release rate (e.g. cutting of textile, cutting, machining or grinding of metal) and of articles where the substances are not intended to be released and where the conditions of use do not promote release.
Other release to the environment of this substance is likely to occur from: outdoor use in long-life materials with low release rate (e.g. metal, wooden and plastic construction and building materials), outdoor use in long-life materials with high release rate (e.g. tyres, treated wooden products, treated textile and fabric, brake pads in trucks or cars, sanding of buildings (bridges, facades) or vehicles (ships)) and indoor use in long-life materials with low release rate (e.g. flooring, furniture, toys, construction materials, curtains, foot-wear, leather products, paper and cardboard products, electronic equipment).
This substance can be found in products with material based on: metal (e.g. cutlery, pots, toys, jewellery).

Widespread uses by professional workers

This substance is used in the following products: metals and welding & soldering products.
ECHA has no public registered data on the types of manufacture using this substance. Other release to the environment of this substance is likely to occur from: indoor use and outdoor use resulting in inclusion into or onto a materials (e.g. binding agent in paints and coatings or adhesives).

Formulation or re-packing

This substance is used in the following products: pH regulators and water treatment products, metals, adhesives and sealants, coating products, fillers, putties, plasters, modelling clay, inks and toners and welding & soldering products.
Release to the environment of this substance can occur from industrial use: formulation of mixtures and formulation in materials.

Uses at industrial sites

This substance is used in the following products: pH regulators and water treatment products, laboratory chemicals, adsorbents, metals and welding & soldering products.
This substance is used in the following areas: formulation of mixtures and/or re-packaging.
This substance is used for the manufacture of: chemicals and machinery and vehicles.
Release to the environment of this substance can occur from industrial use: as processing aid, in processing aids at industrial sites, in the production of articles and as an intermediate step in further manufacturing of another substance (use of intermediates).

Manufacture

Release to the environment of this substance can occur from industrial use: manufacturing of the substance.

The InfoCard summarises the non-confidential data on substances as held in the databases of the European Chemicals Agency (ECHA), including data provided by third parties. The InfoCard is automatically generated. Information requirements under different legislative frameworks may therefore not be up–to–date or complete. Substance manufacturers and importers are responsible for consulting official publications. This InfoCard is covered by the ECHA Legal Disclaimer.

ECHA logo about INFOCARD - Last updated: 10/06/2021

Categories Display