Substance Information

NB: Registration status and tonnage

  • The REACH Registered substance portal was updated on 9th November 2020; the REACH registered factsheets were further updated on 21st December 2020. Details of the improvements can be found at Dissemination Platform Updates. Reprocessing the entire dataset is ongoing since 21 December 2020. ECHA is making all possible efforts to synchronise the registration status and tonnage with the shortest delay.
  • While reprocessing is ongoing please note that substances whose registration dossiers are not yet processed can incorrectly state in the Infocard that they are not registered under REACH. In these cases if there is a link to a REACH registered substance factsheet then the substance IS registered. The correct total tonnage band can be found in the factsheet(s) for the substance.

5,12-dihydro-2,9-dimethylquino[2,3-b]acridine-7,14-dione

EC / List no.: 213-561-3

CAS no.: 980-26-7

Mol. formula: C22H16N2O2

formula
According to the notifications provided by companies to ECHA in REACH registrations no hazards have been classified.

This substance is registered under the REACH Regulation and is manufactured in and / or imported to the European Economic Area, at ≥ 1 000 to < 10 000 tonnes per annum.

This substance is used by consumers, in articles, by professional workers (widespread uses), in formulation or re-packing and at industrial sites.

This substance is used by consumers, in articles, by professional workers (widespread uses), in formulation or re-packing and at industrial sites.

Consumer Uses

This substance is used in the following products: coating products, inks and toners, polymers, fillers, putties, plasters, modelling clay and finger paints.
Other release to the environment of this substance is likely to occur from: indoor use (e.g. machine wash liquids/detergents, automotive care products, paints and coating or adhesives, fragrances and air fresheners), outdoor use, indoor use in close systems with minimal release (e.g. cooling liquids in refrigerators, oil-based electric heaters) and outdoor use in close systems with minimal release (e.g. hydraulic liquids in automotive suspension, lubricants in motor oil and break fluids).

Article service life

Release to the environment of this substance can occur from industrial use: industrial abrasion processing with low release rate (e.g. cutting of textile, cutting, machining or grinding of metal) and industrial abrasion processing with high release rate (e.g. sanding operations or paint stripping by shot-blasting).
Other release to the environment of this substance is likely to occur from: indoor use (e.g. machine wash liquids/detergents, automotive care products, paints and coating or adhesives, fragrances and air fresheners), outdoor use, outdoor use in long-life materials with low release rate (e.g. metal, wooden and plastic construction and building materials), indoor use in long-life materials with low release rate (e.g. flooring, furniture, toys, construction materials, curtains, foot-wear, leather products, paper and cardboard products, electronic equipment), outdoor use in long-life materials with high release rate (e.g. tyres, treated wooden products, treated textile and fabric, brake pads in trucks or cars, sanding of buildings (bridges, facades) or vehicles (ships)) and indoor use in long-life materials with high release rate (e.g. release from fabrics, textiles during washing, removal of indoor paints).
ECHA has no public registered data indicating whether or into which articles the substance might have been processed.

Widespread uses by professional workers

This substance is used in the following products: inks and toners, coating products, polymers, fillers, putties, plasters, modelling clay, finger paints, non-metal-surface treatment products and paper chemicals and dyes.
This substance is used in the following areas: printing and recorded media reproduction, agriculture, forestry and fishing, building & construction work and municipal supply (e.g. electricity, steam, gas, water) and sewage treatment.
This substance is used for the manufacture of: chemicals, plastic products, textile, leather or fur, machinery and vehicles, wood and wood products, pulp, paper and paper products, rubber products, mineral products (e.g. plasters, cement), metals, fabricated metal products, electrical, electronic and optical equipment and furniture.
Other release to the environment of this substance is likely to occur from: indoor use (e.g. machine wash liquids/detergents, automotive care products, paints and coating or adhesives, fragrances and air fresheners), outdoor use and indoor use in close systems with minimal release (e.g. cooling liquids in refrigerators, oil-based electric heaters).

Formulation or re-packing

This substance is used in the following products: inks and toners, coating products, polymers, paper chemicals and dyes and textile treatment products and dyes.
Release to the environment of this substance can occur from industrial use: formulation of mixtures and formulation in materials.

Uses at industrial sites

This substance is used in the following products: coating products, inks and toners, paper chemicals and dyes, polymers, leather treatment products, fillers, putties, plasters, modelling clay and finger paints.
This substance is used in the following areas: formulation of mixtures and/or re-packaging and printing and recorded media reproduction.
This substance is used for the manufacture of: plastic products, wood and wood products, textile, leather or fur, pulp, paper and paper products and rubber products.
Release to the environment of this substance can occur from industrial use: in the production of articles and in processing aids at industrial sites.

Manufacture

ECHA has no public registered data on the routes by which this substance is most likely to be released to the environment.

The InfoCard summarises the non-confidential data on substances as held in the databases of the European Chemicals Agency (ECHA), including data provided by third parties. The InfoCard is automatically generated. Information requirements under different legislative frameworks may therefore not be up–to–date or complete. Substance manufacturers and importers are responsible for consulting official publications. This InfoCard is covered by the ECHA Legal Disclaimer.

ECHA logo about INFOCARD - Last updated: 13/02/2021

Categories Display