legislation-obligation

Substance Regulatory Obligations

OBL

Metal-bearing wastes arising from melting, smelting and refining of metals: Hard zinc spelter; Zinc-containing drosses: Galvanising slab zinc top dross (>90 % Zn), Galvanising slab zinc bottom dross (>92 % Zn), Zinc die casting dross (>85 % Zn), Hot dip galvanisers slab zinc dross (batch) (>92 % Zn), Zinc skimmings; Aluminium skimmings (or skims) excluding salt slag; Slags from copper processing for further processing or refining not containing arsenic, lead or cadmium to an extent that they exhibit Annex III hazard characteristics; Wastes of refractory linings, including crucibles, originating from copper smelting; Slags from precious metals processing for further refining; Tantalum bearing tin slags with less than 0,5 % tin

EC number: -

CAS number: -

Last updated: 21/09/2021
ECHA Legislation Regulatory Obligations

Regulatory obligations may exist for this substance under the legislations under ECHA’s remit or for which ECHA has delegated tasks (i.e. REACH, CLP, BPR, PIC, CAD / CMD, WFD, and POPs). Please check the substance Infocard.

Shipments of Waste Regulation

Shipments of Waste Regulation - Annexes III, IIIA, IIIB, IV and V

This list contains the entries on the following Annexes to the Shipments of Waste Regulation 1013/2006/EC: III, IIIA, IIIB - lists of waste subject to the general information requirements laid down in Art. 18 ('Green Listed Waste'); IV - list of waste subject to prior written notification and consent ('Amber Listed Waste'); and V - list of waste subject to export ban per Art. 36.

Name CAS Class Part OECD Code Basel Waste Code HS Code Hazardous Annex Basel Convention Related Entry Notes  
Metal-bearing wastes arising from melting, smelting and refining of metals: Hard zinc spelter; Zinc-containing drosses: Galvanising slab zinc top dross (>90 % Zn), Galvanising slab zinc bottom dross (>92 % Zn), Zinc die casting dross (>85 % Zn), Hot dip galvanisers slab zinc dross (batch) (>92 % Zn), Zinc skimmings; Aluminium skimmings (or skims) excluding salt slag; Slags from copper processing for further processing or refining not containing arsenic, lead or cadmium to an extent that they exhibit Annex III hazard characteristics; Wastes of refractory linings, including crucibles, originating from copper smelting; Slags from precious metals processing for further refining; Tantalum bearing tin slags with less than 0,5 % tin
B1 METAL AND METAL BEARING WASTES
V-1B Part 1, List B: Wastes which are not covered by Article 1(1)(a) of the Basel Convention, and therefore not covered by the export prohibition
III-PI Part 1: Wastes subject to the general information requirements laid down in Article 18 and listed in Annex IX to the Basel Convention
B1100
Annex IX to the Basel Convention
1 Annex V applies without prejudice to Directives 91/689/EEC and 2006/12/EC.
2 Annex V consists of three parts, Parts 2 and 3 of which apply only when Part 1 is not applicable.
3 Wastes listed in List B of Annex V Part 1 or which are among the non-hazardous waste listed in Annex V Part 2 (i.e. wastes not marked with an asterisk) are covered by the export prohibition if they are contaminated by other materials to an extent which (a) increases the risks associated with the waste sufficiently to render it appropriate for submission to the procedure of prior written notification and consent, when taking into account the hazardous characteristics listed in Annex III to Directive 91/689/EEC; or (b) prevents the recovery of the waste in an environmentally sound manner.
note1 References in Lists A and B to Annexes I, III and IV refer to Annexes of the Basel Convention.
note22 Regardless of whether or not wastes are included on this list (Annex III or IIIB), they may not be subject to the general information requirements laid down in Article 18 if they are contaminated by other materials to an extent which (a) increases the risks associated with the wastes sufficiently to render them appropriate for submission to the procedure of prior written notification and consent, when taking into account the hazardous characteristics listed in Annex III to Directive 91/689/EEC; or (b) prevents the recovery of the wastes in an environmentally sound manner.
Details