EU-IN_VITRO_MEDICAL_DEVICE_REG-ART_5_2_ANX_1

In Vitro Diagnostic Medical Devices Regulation - Hazardous Substances

EU. Hazardous Substances for Purposes of Art. 5(2) and Annex I of Regulation (EU) 2017/746 on In Vitro Diagnostic Medical Devices, 5 May 2017, as corrected 27 December 2019

This list contains a non-exhaustive inventory of hazardous substances for purposes of Regulation (EU) 2017/746, including Chap. 2 (Placing on the market and putting into service) and Annex I (General Safety and Performance Requirements). It is derived from: Table 3 of Annex VI to CLP, REACH Candidate List of SVHCs, and Directive 2000/54/EC's Annex III (Biological Agents list).

RELEVANT LEGISLATION
Back to the List

Hydrocarbons, C6-7, naphtha-cracking, solvent-refined; Low boiling point modified naphtha [A complex combination of hydrocarbons obtained by the sorption of benzene from a catalytically fully hydrogenated benzene-rich hydrocarbon cut that was distillatively obtained from prehydrogenated cracked naphtha. It consists predomi nantly of paraffinic and naphthenic hydrocarbons having carbon numbers predominantly in the range of C6 through C7 and boiling in the range of approximately 70 °C to 100 °C (158°F to 212°F).]

A complex combination of hydrocarbons obtained by the sorption of benzene from a catalytically fully hydrogenated benzene-rich hydrocarbon cut that was distillatively obtained from prehydrogenated cracked naphtha. It consists predominantly of paraffinic and naphthenic hydrocarbons having carbon numbers predominantly in the range of C6 through C7 and boiling in the range of approximately 70°C to 100°C (158°F to 212°F). EC / List no: 295-446-8 CAS no: 92045-64-2
EU CLP (1272/2008)
Carc. 1B; Muta. 1B; Asp. Tox. 1