EU-IN_VITRO_MEDICAL_DEVICE_REG-ART_5_2_ANX_1

In Vitro Diagnostic Medical Devices Regulation - Hazardous Substances

EU. Hazardous Substances for Purposes of Art. 5(2) and Annex I of Regulation (EU) 2017/746 on In Vitro Diagnostic Medical Devices, 5 May 2017, as corrected 27 December 2019

This list contains a non-exhaustive inventory of hazardous substances for purposes of Regulation (EU) 2017/746, including Chap. 2 (Placing on the market and putting into service) and Annex I (General Safety and Performance Requirements). It is derived from: Table 3 of Annex VI to CLP, REACH Candidate List of SVHCs, and Directive 2000/54/EC's Annex III (Biological Agents list).

RELEVANT LEGISLATION
Back to the List

Lubricating oils (petroleum), C15-30, hydrotreated neutral oil-based; Baseoil — unspecified [A complex combination of hydrocarbons obtained by treating light vacuum gas oil and heavy vacuum gas oil with hydrogen in the presence of a catalyst in a two stage process with dewaxing being carried out between the two stages. It consists predominantly of hydrocarbons having carbon numbers predominantly in the range of C15 through C30 and produces a finished oil having a viscosity of approximately 15cSt at 40 °C. It contains a relatively large proportion of saturated hydrocabons.]

A complex combination of hydrocarbons obtained by treating light vacuum gas oil and heavy vacuum gas oil with hydrogen in the presence of a catalyst in a two stage process with dewaxing being carried out between the two stages. It consists predominantly of hydrocarbons having carbon numbers predominantly in the range of C15 through C30 and produces a finished oil having a viscosity of approximately 15cSt at 40°C. It contains a relatively large proportion of saturated hydrocarbons. EC / List no: 276-737-9 CAS no: 72623-86-0
EU CLP (1272/2008)
Carc. 1B