Preskoči na sadržaj
Preskoči na sadržaj

Usvojena mišljenja i prethodna savjetovanja o zahtjevima za autorizaciju

Usvojena mišljenja i prethodna savjetovanja o zahtjevima za autorizaciju

 

This page provides further information on the applications for authorisation or review reports, which have undergone public consultation. The applications for authorisation are in the opinion development phase until the final opinions of the Committees for Risk Assessment and Socio-economic Analysis have been adopted and sent to the European Commission. The European Commission's decision-making process can be followed through the comitology register, where further information is published about the REACH Committee's past and upcoming meetings.

 
0078-01 Initial 1,2-Dichloroethane (EDC) 203-458-1 107-06-2

  • DOW ITALIA S.R.L.
  • Dow France SAS [name of co-applicant in the original application: Rohm and Haas France SAS updated due to a notified legal entity name change]

Industrial use as a sulphonation swelling agent of polystyrene-divinylbenzene copolymer beads in the production of strong acid cation exchange resins Commission decided
0099-02 Initial Sodium chromate 231-889-5 7775-11-3
  • Boeing Distribution, Inc. [name of applicant in the original application: Aviall Services Inc updated due to a notified change of corporate name]
  • Wesco Aircraft EMEA, LTD. [co-applicant in the original application: Haas Group International SCM Ltd updated due to a notified legal entity change]
Use of sodium chromate for sealing after anodizing, chemical conversion coating, pickling and etching applications by aerospace companies and their suppliers Opinions adopted
0099-01 Initial Sodium chromate 231-889-5 7775-11-3
  • Boeing Distribution, Inc. [name of applicant in the original application: Aviall Services Inc updated due to a notified change of corporate name]
  • Wesco Aircraft EMEA, LTD. [co-applicant in the original application: Haas Group International SCM Ltd updated due to a notified legal entity change]
Formulation of Mixtures of sodium chromate for sealing after anodizing, chemical conversion coating, pickling and etching applications by aerospace companies and their suppliers Opinions adopted
0030-01 Initial Sodium chromate 231-889-5 7775-11-3
  • Dometic GmbH
  • Dometic Hűtőgépgyártó és Kereskedelmi Zrt.
The use of sodium chromate as an anticorrosion agent of the carbon steel cooling system in absorption refrigerators up to 0.75% by weight (Cr6+) in the cooling solution Commission decided
0032-02 Initial Chromium trioxide 215-607-8 1333-82-0
  • LANXESS Deutschland GmbH in its legal capacity as Only Representative of LANXESS CISA (Pty) Ltd.
  • Atotech Deutschland GmbH
  • Boeing Distribution, Inc. [name of applicant in the original application: Aviall Services Inc updated due to a notified change of corporate name]
  • Prospere Logistic Baltic OÜ in its legal capacity as Only Representative of Aktyubinsk Chromium Chemicals Plant, Kazakhstan [application transferred from original Applicant: "BONDEX TRADING LTD in its legal capacity as Only Representative of Aktyubinsk Chromium Chemicals Plant, Kazakhstan" due to a notified change of Only Representative]
  • CROMITAL S.P.A. in its legal capacity as Only Representative of Soda Sanayii A.S.
  • Elementis GmbH in its legal capacity as Only Representative of Elementis Chromium Inc [application transferred from original Applicant: "Elementis Chromium LLP in its legal capacity as Only Representative of Elementis Chromium Inc" due to a notified change of Only Representative]
  • MacDermid Enthone GmbH [name of co-applicant in the original application: Enthone GmbH updated due to a notified legal entity name change]
Functional Chrome Plating Opinions adopted
0032-01 Initial Chromium trioxide 215-607-8 1333-82-0
  • LANXESS Deutschland GmbH in its legal capacity as Only Representative of LANXESS CISA (Pty) Ltd.
  • Atotech Deutschland GmbH
  • Boeing Distribution, Inc. [name of applicant in the original application: Aviall Services Inc updated due to a notified change of corporate name]
  • Prospere Logistic Baltic OÜ in its legal capacity as Only Representative of Aktyubinsk Chromium Chemicals Plant, Kazakhstan [application transferred from original Applicant: "BONDEX TRADING LTD in its legal capacity as Only Representative of Aktyubinsk Chromium Chemicals Plant, Kazakhstan" due to a notified change of Only Representative]
  • CROMITAL S.P.A. in its legal capacity as Only Representative of Soda Sanayii A.S.
  • Elementis GmbH in its legal capacity as Only Representative of Elementis Chromium Inc [application transferred from original Applicant: "Elementis Chromium LLP in its legal capacity as Only Representative of Elementis Chromium Inc" due to a notified change of Only Representative]
  • MacDermid Enthone GmbH [name of co-applicant in the original application: Enthone GmbH updated due to a notified legal entity name change]
Formulation of mixtures Opinions adopted
0032-06 Initial Chromium trioxide 215-607-8 1333-82-0
  • LANXESS Deutschland GmbH in its legal capacity as Only Representative of LANXESS CISA (Pty) Ltd.
  • Atotech Deutschland GmbH
  • Boeing Distribution, Inc. [name of applicant in the original application: Aviall Services Inc updated due to a notified change of corporate name]
  • Prospere Logistic Baltic OÜ in its legal capacity as Only Representative of Aktyubinsk Chromium Chemicals Plant, Kazakhstan [application transferred from original Applicant: "BONDEX TRADING LTD in its legal capacity as Only Representative of Aktyubinsk Chromium Chemicals Plant, Kazakhstan" due to a notified change of Only Representative]
  • CROMITAL S.P.A. in its legal capacity as Only Representative of Soda Sanayii A.S.
  • Elementis GmbH in its legal capacity as Only Representative of Elementis Chromium Inc [application transferred from original Applicant: "Elementis Chromium LLP in its legal capacity as Only Representative of Elementis Chromium Inc" due to a notified change of Only Representative]
  • MacDermid Enthone GmbH [name of co-applicant in the original application: Enthone GmbH updated due to a notified legal entity name change]
Passivation of tin-plated steel (ETP) Opinions adopted
0032-05 Initial Chromium trioxide 215-607-8 1333-82-0
  • LANXESS Deutschland GmbH in its legal capacity as Only Representative of LANXESS CISA (Pty) Ltd.
  • Atotech Deutschland GmbH
  • Boeing Distribution, Inc. [name of applicant in the original application: Aviall Services Inc updated due to a notified change of corporate name]
  • Prospere Logistic Baltic OÜ in its legal capacity as Only Representative of Aktyubinsk Chromium Chemicals Plant, Kazakhstan [application transferred from original Applicant: "BONDEX TRADING LTD in its legal capacity as Only Representative of Aktyubinsk Chromium Chemicals Plant, Kazakhstan" due to a notified change of Only Representative]
  • CROMITAL S.P.A. in its legal capacity as Only Representative of Soda Sanayii A.S.
  • Elementis GmbH in its legal capacity as Only Representative of Elementis Chromium Inc [application transferred from original Applicant: "Elementis Chromium LLP in its legal capacity as Only Representative of Elementis Chromium Inc" due to a notified change of Only Representative]
  • MacDermid Enthone GmbH [name of co-applicant in the original application: Enthone GmbH updated due to a notified legal entity name change]
Surface treatment (except passivation of tin-plated steel (ETP)) for applications in various industry sectors namely architectural, automotive, metal manufacturing and finishing, and general engineering (unrelated to Functional chrome plating or Functional chrome plating with decorative character) Opinions adopted
0032-03 Initial Chromium trioxide 215-607-8 1333-82-0
  • LANXESS Deutschland GmbH in its legal capacity as Only Representative of LANXESS CISA (Pty) Ltd.
  • Atotech Deutschland GmbH
  • Boeing Distribution, Inc. [name of applicant in the original application: Aviall Services Inc updated due to a notified change of corporate name]
  • Prospere Logistic Baltic OÜ in its legal capacity as Only Representative of Aktyubinsk Chromium Chemicals Plant, Kazakhstan [application transferred from original Applicant: "BONDEX TRADING LTD in its legal capacity as Only Representative of Aktyubinsk Chromium Chemicals Plant, Kazakhstan" due to a notified change of Only Representative]
  • CROMITAL S.P.A. in its legal capacity as Only Representative of Soda Sanayii A.S.
  • Elementis GmbH in its legal capacity as Only Representative of Elementis Chromium Inc [application transferred from original Applicant: "Elementis Chromium LLP in its legal capacity as Only Representative of Elementis Chromium Inc" due to a notified change of Only Representative]
  • MacDermid Enthone GmbH [name of co-applicant in the original application: Enthone GmbH updated due to a notified legal entity name change]
Functional chrome plating with decorative character Opinions adopted
0032-04 Initial Chromium trioxide 215-607-8 1333-82-0
  • LANXESS Deutschland GmbH in its legal capacity as Only Representative of LANXESS CISA (Pty) Ltd.
  • Atotech Deutschland GmbH
  • Boeing Distribution, Inc. [name of applicant in the original application: Aviall Services Inc updated due to a notified change of corporate name]
  • Prospere Logistic Baltic OÜ in its legal capacity as Only Representative of Aktyubinsk Chromium Chemicals Plant, Kazakhstan [application transferred from original Applicant: "BONDEX TRADING LTD in its legal capacity as Only Representative of Aktyubinsk Chromium Chemicals Plant, Kazakhstan" due to a notified change of Only Representative]
  • CROMITAL S.P.A. in its legal capacity as Only Representative of Soda Sanayii A.S.
  • Elementis GmbH in its legal capacity as Only Representative of Elementis Chromium Inc [application transferred from original Applicant: "Elementis Chromium LLP in its legal capacity as Only Representative of Elementis Chromium Inc" due to a notified change of Only Representative]
  • MacDermid Enthone GmbH [name of co-applicant in the original application: Enthone GmbH updated due to a notified legal entity name change]
Surface treatment for applications in the aeronautics and aerospace industries, unrelated to Functional chrome plating or Functional chrome plating with decorative character Opinions adopted
0023-01 Initial Trichloroethylene 201-167-4 79-01-6 A.L.P.A.-AZIENDA LAVORAZIONE PRODOTTI AUSILIARI S.P.A.; CAFFARO INDUSTRIE S.P.A Use of trichloroethylene as solvent in the synthesis of vulcanization accelerating agents for fluoroelastomers Commission decided
0168-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Abbott Diagnostics GmbH Professional use as a surfactant, in wash buffer components used in conjunction with Fluorescence In Situ Hybridisation (FISH) test kits and/or their Laboratory Developed Test (LDT) equivalents, in clinical diagnostic use for medical analysis of human tissue and blood samples to identify characteristic genetic abnormalities related to specific disease conditions. Opinion development
0167-05 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Abbott GmbH & Co. KG Industrial use as a surfactant in the extraction and purification of antigens for incorporation into In-Vitro Diagnostic Devices (IVDs) for clinical testing using ARCHITECT, Alinity and ABBOTT PRISM automated analyser systems. Opinion development
0167-04 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Abbott Ireland Professional use of system solutions (Pre-Trigger and Trigger) in the final use of the In-Vitro Diagnostic Devices (IVDs) on ARCHITECT and Alinity automated analyser systems. Opinion development
0167-03 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Abbott Ireland Industrial use as a surfactant in the formulation of system solutions (Pre-Trigger and Trigger), for use with In-Vitro Diagnostic Devices (IVDs) on ARCHITECT and Alinity automated analyser systems. Opinion development
0167-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Abbott Ireland
Abbott GmbH & Co. KG
Industrial use as a surfactant in the formulation of In-Vitro Diagnostic Devices (IVDs) for clinical testing using ARCHITECT, Alinity and ABBOTT PRISM automated analyser systems. Opinion development
0167-02 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Abbott Ireland
Abbott GmbH & Co. KG
Abbott Diagnostics GmbH
Professional use as a surfactant in the final use of In-Vitro Diagnostic Devices (IVDs) for clinical testing using ARCHITECT, Alinity and ABBOTT PRISM automated analyser systems. Opinion development
0067-01 Initial Chromium trioxide 215-607-8 1333-82-0 Abloy Oy Use of chromium trioxide in electroplating of mechanical and electromechanical cylinders, cam- and padlocks, electromechanical lock cases and architectural hardware. Commission decided
0088-01 Initial Bis(2-methoxyethyl) ether 203-924-4 111-96-6 Acton Technologies Limited Use of bis(2-methoxyethyl) ether (diglyme) as a carrier solvent in the formulation and subsequent application of sodium naphthalide etchant for fluoropolymer surface modification whilst preserving article structural integrity (in-house processes). Opinions adopted
0088-02 Initial Bis(2-methoxyethyl) ether 203-924-4 111-96-6 Acton Technologies Limited Use of bis(2-methoxyethyl) ether (diglyme) as a carrier solvent in the application of sodium naphthalide etchant for fluoropolymer surface modification whilst preserving article structural integrity (downstream user processes). Opinions adopted
0046-01 Initial Strontium chromate 232-142-6 7789-06-2 AKZO Nobel Car Refinishes B.V.
Habich GmbH
Henkel Global SupplyChain B.V.
Indestructible Paint Ltd.
Finalin GmbH
Mapaero
PPG Central (UK) Ltd inits legal capacity as OnlyRepresentative of PRCDeSoto International Inc. - OR5
PPG Industries (UK) Ltd
PPG Coatings SA
Boeing Distribution, Inc. [name of applicant in the original application: Aviall Services Inc updated due to a notified change of corporate name]
Formulation of Mixtures Opinions adopted
0046-02 Initial Strontium chromate 232-142-6 7789-06-2 AKZO Nobel Car Refinishes B.V.
Habich GmbH
Henkel Global SupplyChain B.V.
Indestructible Paint Ltd.
Finalin GmbH
Mapaero
PPG Central (UK) Ltd inits legal capacity as OnlyRepresentative of PRCDeSoto International Inc. - OR5
PPG Industries (UK) Ltd
PPG Coatings SA
Boeing Distribution, Inc. [name of applicant in the original application: Aviall Services Inc updated due to a notified change of corporate name]
Application of paints, primers and specialty coatings containing Strontium Chromate in the construction of aerospace and aeronautical parts, including aeroplanes / helicopters, spacecraft, satellites, launchers, engines, and for the maintenance of such constructions. Opinions adopted
0109-01 Initial 1,2-Dichloroethane (EDC) 203-458-1 107-06-2 Akzo Nobel Chemicals SpA The use of 1,2-dichloroethane as recyclable solvent in the production of a polyacrylate surfactant Commission decided
0041-02 Initial Sodium dichromate 234-190-3
7789-12-0
10588-01-9
Akzo Nobel Pulp and
Performance Chemicals AB
Use of Sodium dichromate as an additive for suppressing parasitic reactions and oxygen evolution, pH buffering and cathode corrosion protection in the electrolytic manufacture of potassium chlorate. Commission decided
0041-01 Initial Sodium dichromate 234-190-3
10588-01-9
7789-12-0
Akzo Nobel Pulp and Performance Chemicals AB
Akzo Nobel Pulp and Performance Chemicals Oy
Akzo Nobel Pulp and Performance Chemicals S.A.S.
Use of Sodium dichromate as an additive for suppressing parasitic reactions and oxygen evolution, pH buffering and cathode corrosion protection in the electrolytic manufacture of sodium chlorate with or without subsequent production of chlorine dioxide. Commission decided
0130-01 Initial Chromium trioxide 215-607-8 1333-82-0 Aloys F. Dornbracht GmbH & Co.KG Functional chrome plating with decorative character for sanitary applications Opinions adopted
0144-01 Initial Pitch, coal tar, high-temp 266-028-2 65996-93-2 ArianeGroup SAS Industrial use of pitch, coal tar, high temp. as precursor of carbon matrix in the manufacturing of thermally and thermo-mechanically highly loaded carbon/carbon parts including nozzle throats and other critical carbon-carbon composite parts, resistant to very harsh erosion conditions, and very high temperature ranges, dedicated to high-performance civilian and military aerospace launchers. Opinion development
0136-01 Initial Sodium chromate 231-889-5 7775-11-3 Ariston Thermo SpA Use of sodium chromate as an anticorrosion agent of the carbon steel in sealed circuit of gas absorption appliances up to 0.70% by weight (as Cr6+) in the refrigerant solution Opinion development
0002-02 Initial Bis(2-ethylhexyl) phthalate (DEHP) 204-211-0 117-81-7 ARKEMA FRANCE Industrial use in polymer processing by calendering, spread coating, extrusion, injection moulding to produce PVC articles [except erasers, sex toys, small household items (<10cm ) that can be swallowed by children, clothing intended to be worn against the bare skin; also toys, cosmetics and food contact material (restricted under other EU regulation)] Withdrawn
0002-01 Initial Bis(2-ethylhexyl) phthalate (DEHP) 204-211-0 117-81-7 ARKEMA FRANCE Formulation of DEHP in compounds, dry-blends and Plastisol formulations Withdrawn
0035-01 Initial Sodium dichromate 234-190-3
7789-12-0
10588-01-9
ARKEMA FRANCE Use of Sodium dichromate as an additive for suppressing parasitic reactions and oxygen evolution, pH buffering and cathode corrosion protection in the electrolytic manufacture of sodium chlorate with or without subsequent production of chlorine dioxide or sodium chlorite Commission decided
0042-01 Initial Sodium dichromate 234-190-3
7789-12-0
10588-01-9
ARLANXEO Netherlands B.V. [application transferred from original Applicant: Lanxess Elastomers B.V. due to a notified legal entity change] Use of sodium dichromate as corrosion inhibitor in ammonia absorption deep cooling systems Commission decided
0126-01 Initial Dibutyl phthalate (DBP) 201-557-4 84-74-2 AVX Limited Industrial use in the manufacture of ceramic sheets for the production of multi-layer ceramic capacitors. Commission decided
0106-01 Initial Ammonium dichromate 232-143-1 7789-09-5 BAE Systems (Operations) Limited
Qioptiq Ltd
Industrial use of Ammonium Dichromate in the process of manufacturing holographic combiners for diffractive head-up displays intended to be used in military aircrafts Commission decided
0060-01 Initial 1,2-Dichloroethane (EDC) 203-458-1 107-06-2 BASF SE Industrial use as a recyclable solvent and extraction agent in a closed system for purification of 1,3,5-trioxane Commission decided
0076-02 Initial 1,2-Dichloroethane (EDC) 203-458-1 107-06-2 BASF SE Industrial use as solvent and crystallisation medium in the synthesis of the EU biocide flocoumafen (ISO) Commission decided
0076-01 Initial 1,2-dichloroethane (EDC) 203-458-1 107-06-2 BASF SE Industrial use as solvent and crystallisation medium in the synthesis of the EU pesticide bentazone (ISO) Commission decided
0110-01 Initial 1,2-Dichloroethane (EDC) 203-458-1 107-06-2 Bayer Pharma AG Use as an industrial solvent in the manufacture of the high-grade pure final intermediate of Iopromide, the Active Pharmaceutical Ingredient for the X-ray contrast medium Ultravist® Commission decided
0153-02 Initial Anthracene oil 292-602-7 90640-80-5 BILBAINA DE ALQUITRANES, S.A. Use of AO for manufacture of formulations for various industrial uses Opinion development
0147-01 Initial Pitch, coal tar, high temp. 266-028-2 65996-93-2 BILBAINA DE ALQUITRANES, S.A. Use of CTPht as a binder in the manufacture of clay targets Opinion development
0153-01 Initial Pitch, coal tar, high temp. 266-028-2 65996-93-2 BILBAINA DE ALQUITRANES, S.A. Use of CTPht for manufacture of formulations for various industrial uses Opinion development
0145-02 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - BioMarin International Limited Industrial use as a surfactant to perform viral inactivation of biological proteins in the manufacture of a biopharmaceutical Final Bulk Drug Substance (FBDS) for Gene Therapy products for the treatment of rare conditions in the human population. Opinion development
0145-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - BioMarin International Limited Industrial use as a surfactant to perform viral inactivation of biological proteins in the manufacture of a biopharmaceutical Final Bulk Drug Substance (FBDS) for an Enzyme Replacement Therapy (BMN250) for the treatment of Mucopolysaccharidosis IIIB (MPS IIIB). Opinion development
0143-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - bioMérieux SA Industrial use of 4-tert-OPnEO for its non-ionic detergent properties in the formulation of reagents for molecular clinical and industrial in vitro preparative and testing applications. Opinion development
0143-03 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - bioMérieux SA Industrial use of 4-tert-OPnEO for its detergent properties, used for the extraction of biological material which is further formulated and intended for clinical and industrial in vitro testing applications. Opinion development
0143-02 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - bioMérieux SA Industrial use of 4-tert-OPnEO for its non-ionic detergent to control the level of non-specific reactions in the formulation of in vitro reagents for clinical and industrial in vitro testing immunoassays. Opinion development
0024-05 Initial Trichloroethylene 201-167-4 79-01-6 Blue Cube Germany Assets GmbH & Co. KG [application transferred from original Applicant: DOW DEUTSCHLAND ANLAGENGESELLSCHAFT mbH due to a notified legal entity change] Use of Trichloroethylene as Extraction Solvent for Bitumen in Asphalt Analysis Commission decided
0024-01 Initial Trichloroethylene 201-167-4 79-01-6 Blue Cube Germany Assets GmbH & Co. KG [application transferred from original Applicant: DOW DEUTSCHLAND ANLAGENGESELLSCHAFT mbH due to a notified legal entity change] Use Of Trichloroethylene in Industrial Parts Cleaning by Vapour Degreasing in Closed Systems where specific requirements (system of use-parameters) exist Commission decided
0024-02 Initial Trichloroethylene 201-167-4 79-01-6 Blue Cube Germany Assets GmbH & Co. KG [application transferred from original Applicant: DOW DEUTSCHLAND ANLAGENGESELLSCHAFT mbH due to a notified legal entity change] Industrial use as process chemical (enclosed systems) in Alcantara Material production Commission decided
0024-03 Initial Trichloroethylene 201-167-4 79-01-6 Blue Cube Germany Assets GmbH & Co. KG [application transferred from original Applicant: DOW DEUTSCHLAND ANLAGENGESELLSCHAFT mbH due to a notified legal entity change] Use of tricholoroethylene in packaging Commission decided
0024-04 Initial Trichloroethylene 201-167-4 79-01-6 Blue Cube Germany Assets GmbH & Co. KG [application transferred from original Applicant: DOW DEUTSCHLAND ANLAGENGESELLSCHAFT mbH due to a notified legal entity change] Use of tricholoroethylene in formulation Commission decided
0138-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Boehringer Ingelheim Pharma
GmbH & Co. KG; Boehringer
Ingelheim RCV GmbH & Co KG
Use of 4-tert-OPnEO in a washing buffer to purify biological APIs (active pharmaceutical ingredients) during the production of Palivizumab and Moxetumomab pasudotox-tdfk. Opinion development
0118-02 Initial Pentazinc chromate octahydroxide 256-418-0 49663-84-5 Boeing Distribution, Inc. [name of applicant in the original application: Aviall Services Inc updated due to a notified change of corporate name];
Finalin GmbH
Use of pentazinc chromate octahydroxide in wash primer, fuel tank primer and aluminized primer for the purpose of corrosion protection in aeronautic applications Opinions adopted
0118-01 Initial Pentazinc chromate octahydroxide 256-418-0 49663-84-5 Boeing Distribution, Inc. [name of applicant in the original application: Aviall Services Inc updated due to a notified change of corporate name];
Finalin GmbH
Formulation of mixture Opinions adopted
0009-01 Initial Diarsenic trioxide 215-481-4 1327-53-3 Boliden Kokkola Oy Use of diarsenic trioxide in the purification of metal impurities from the leaching solution in the zinc electrowinning process Commission decided
0031-01 Initial Sodium dichromate 234-190-3
7789-12-0
10588-01-9
Boliden Mineral AB The use of sodium dichromate in copper/lead separation in concentrators handling complex sulphide ores Commission decided
0104-01 Initial Sodium dichromate 234-190-3
7789-12-0
10588-01-9
Borealis Plastomers B.V. The use of sodium dichromate as in-situ corrosion inhibitor in a closed water/ammonia absorption cooling system Commission decided
0086-01 Initial Bis(2-methoxyethyl) ether (Diglyme) 203-924-4 111-96-6 Bracco Imaging s.p.a Use of bis(2-methoxyethyl) ether (diglyme) as a processing aid in the purification of 5-amino-2,4,6-triiodoisophthalic acid dichloride (EC 417- 220-1; CAS 37441-29-5) by precipitation Commission decided
0044-01 Initial Potassium dichromate 231-906-6 7778-50-9 Brenntag UK Ltd Formulation of Mixtures Opinions adopted
0044-02 Initial Potassium dichromate 231-906-6 7778-50-9 Brenntag UK Ltd Use of potassium dichromate for surface treatment of metals such as aluminium, steel, zinc, magnesium, titanium, alloys, composites, sealings of anodic films Opinions adopted
0043-02 Initial Sodium dichromate 234-190-3
10588-01-9
7789-12-0
Brenntag UK Ltd
Henkel AG & Co. KGaA
AD International BV
Use of Sodium dichromate for surface treatment of metals such as aluminium, steel, zinc, magnesium, titanium, alloys, composites and sealings of anodic films Opinions adopted
0043-03 Initial Sodium dichromate 234-190-3
7789-12-0
10588-01-9
Brenntag UK Ltd
Henkel AG & Co. KGaA
AD International BV
Use of Sodium dichromate for the electrolytic passivation of tin plated steel for the packaging industry Opinions adopted
0043-01 Initial Sodium dichromate 234-190-3
7789-12-0
10588-01-9
Brenntag UK Ltd
Henkel AG & Co. KGaA
AD International BV
Formulation of Mixtures Opinions adopted
0040-01 Initial Sodium dichromate 234-190-3
10588-01-9
7789-12-0
CAFFARO BRESCIA S.r.l Use of Sodium dichromate as an additive for suppressing parasitic reactions and oxygen evolution, pH buffering and cathode corrosion protection in the electrolytic manufacture of sodium chlorite Commission decided
0025-01 Initial Trichloroethylene 201-167-4 79-01-6 Chimcomplex S.A. Borzesti Industrial use of trichloroethylene (TCE) as a solvent as a degreasing agent in closed systems Commission decided
0059-01 Initial Arsenic acid 231-901-9 7778-39-4 CIRCUIT FOIL LUXEMBOURG SARL Industrial use of arsenic acid for the treatment of copper foil used in the manufacture of Printed Circuit Board Commission decided
0058-01 Initial Chromium trioxide 215-607-8 1333-82-0 CIRCUIT FOIL LUXEMBOURG SARL Industrial use of chromium trioxide for the treatment of copper foil used in the manufacture of Printed Circuit Board Commission decided
0102-01 Initial Chromium trioxide 215-607-8 1333-82-0 Clariant Produkte (Deutschland) GmbH Use of chromium trioxide in a catalyst for the dehydrogenation of propane to propene Commission decided
0072-05 Initial Potassium dichromate 231-906-6 7778-50-9 Connecteurs Electriques Deutsch Industrial use of a mixture containing hexavalent chromium compounds in conversion coating and passivation of circular and rectangular connectors in order to meet the requirements of international standards and special requirements of industries subject to harsh environments. Commission decided
0072-04 Initial Potassium dichromate 231-906-6 7778-50-9 Connecteurs Electriques Deutsch
TE UK Ltd
Industrial use of a mixture containing hexavalent chromium compounds for the conversion of cadmium coated circular and rectangular connectors in order to achieve a higher level of performances than the requirements of international standards as well as to withstand harsh environments and high safety applications (such as in the military, aeronautic, aerospace, mining, offshore and nuclear industries or for the application in safety devices for road vehicles, rolling stock and vessels). Commission decided
0055-01 Initial Chromium trioxide 215-607-8 1333-82-0 CROMOMED S.A.
CRONOR S.A.
Cromo Europa S.A.
CHROMATLANTIQUE INDUSTRIEL
VILA ELECTROQUIMICAS.A.
Functional Chrome Plating Opinions adopted
0012-10 Initial Lead chromate molybdate sulphate red (C.I. Pigment Red 104) 235-759-9 12656-85-8 DCC Maastricht B.V. OR Industrial use of solid or liquid colour premixes and pre-compounds containing pigment to colour plastic or plasticised articles for non-consumer use Commission decided
0012-06 Initial Lead chromate molybdate sulphate red (C.I. Pigment Red 104) 235-759-9 12656-85-8 DCC Maastricht B.V. OR Professional, non-consumer application of paints on metal surfaces (such as machines, vehicles, structures, signs, road furniture etc.) or as road marking Authorisation expired
0012-12 Initial Lead chromate molybdate sulphate red (C.I. Pigment Red 104) 235-759-9 12656-85-8 DCC Maastricht B.V. OR Professional use of solid or liquid colour premixes and pre-compounds containing pigment in the application of hotmelt road marking Authorisation expired
0012-08 Initial Lead chromate molybdate sulphate red (C.I. Pigment Red 104) 235-759-9 12656-85-8 DCC Maastricht B.V. OR Distribution and mixing pigment powder in an industrial environment into liquid or solid premix to colour plastic/plasticised articles for non consumer use Commission decided
0012-02 Initial Lead chromate molybdate sulphate red (C.I. Pigment Red 104) 235-759-9 12656-85-8 DCC Maastricht B.V. OR Distribution and mixing pigment powder in an industrial environment into solvent-based paints for non-consumer use Commission decided
0012-04 Initial Lead chromate molybdate sulphate red (C.I. Pigment Red 104) 235-759-9 12656-85-8 DCC Maastricht B.V. OR Industrial application of paints on metal surfaces (such as machines vehicles, structures, signs, road furniture, coil coating etc.) Commission decided
0012-07 Initial Lead sulfochromate yellow (C.I. Pigment Yellow 34) 215-693-7 1344-37-2 DCC Maastricht B.V. OR Distribution and mixing pigment powder in an industrial environment into liquid or solid premix to colour plastic/plasticised articles for non consumer use Commission decided
0012-01 Initial Lead sulfochromate yellow (C.I. Pigment Yellow 34) 215-693-7 1344-37-2 DCC Maastricht B.V. OR Distribution and mixing pigment powder in an industrial environment into solvent-based paints for non-consumer use Commission decided
0012-11 Initial Lead sulfochromate yellow (C.I. Pigment Yellow 34) 215-693-7 1344-37-2 DCC Maastricht B.V. OR Professional use of solid or liquid colour premixes and pre-compounds containing pigment in the application of hotmelt road marking Authorisation expired
0012-03 Initial Lead sulfochromate yellow (C.I. Pigment Yellow 34) 215-693-7 1344-37-2 DCC Maastricht B.V. OR Industrial application of paints on metal surfaces (such as machines vehicles, structures, signs, road furniture, coil coating etc.) Commission decided
0012-05 Initial Lead sulfochromate yellow (C.I. Pigment Yellow 34) 215-693-7 1344-37-2 DCC Maastricht B.V. OR Professional, non-consumer application of paints on metal surfaces (such as machines, vehicles, structures, signs, road furniture etc.) or as road marking Authorisation expired
0012-09 Initial Lead sulfochromate yellow (C.I. Pigment Yellow 34) 215-693-7 1344-37-2 DCC Maastricht B.V. OR Industrial use of solid or liquid colour premixes and pre-compounds containing pigment to colour plastic or plasticised articles for non-consumer use Commission decided
0004-02 Initial Bis(2-ethylhexyl) phthalate (DEHP) 204-211-0 117-81-7 DEZA a.s. Industrial use in polymer processing by calendering, spread coating, extrusion, injection moulding to produce PVC articles [except erasers, sex toys, small household items (<10cm ) that can be swallowed by children, clothing intended to be worn against the bare skin; also toys, cosmetics and food contact material (restricted under other EU regulation)] Pending decision
0004-01 Initial Bis(2-ethylhexyl) phthalate (DEHP) 204-211-0 117-81-7 DEZA a.s. Formulation of DEHP in compounds, dry-blends and Plastisol formulations Pending decision
0004-03 Initial Bis(2-ethylhexyl) phthalate (DEHP) 204-211-0 117-81-7 DEZA a.s. Industrial use of DEHP in ceramic sheets and printing pastes for production of capacitors and lambda sensor elements Pending decision
0005-01 Initial Dibutyl phthalate (DBP) 201-557-4 84-74-2 DEZA a.s. Use of DBP as an absorption solvent in a closed system in the manufacture of maleic anhydride Commission decided
0005-03 Initial Dibutyl phthalate (DBP) 201-557-4 84-74-2 DEZA a.s. Industrial use of DBP in ceramic sheets and printing pastes for production of capacitors and lambda sensor elements Commission decided
0005-02 Initial Dibutyl phthalate (DBP) 201-557-4 84-74-2 DEZA a.s. Use of DBP in propellants
Formulation: Industrial use of DBP as a burning rate surface moderant, plasticiser and/or coolant in the formulation of nitrocellulose-based propellant grains.
Use at industrial site: Industrial use of DBP-containing propellant grains in manufacture of ammunition for military and civilian uses, and pyrocartridges for aircraft ejection seat safety systems [includes propellants for police force ammunition and excludes propellants intended for manual, private reloading of ammunition cartridges by civilian users, i.e., licensed individual sports shooters and hunters. No direct consumer use of DBP or its mixtures is covered by this Use.]
Commission decided
0148-01 Initial Pitch, coal tar, high temp. 266-028-2 65996-93-2 DEZA a.s. Use of CTPht as a binder in the manufacture of clay targets Opinion development
0140-02 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - DIAGNOSTICA STAGO Industrial use of 4-tert-OPnEO in view of controlling the amount of non-specific reactions in the production of in-vitro diagnostic reagents (STA® - Liatest® D-Di assays). Opinion development
0140-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - DIAGNOSTICA STAGO Industrial use of 4-tert-OPnEO for its detergent properties in the process of cell lysing for the production of in-vitro diagnostic reagents (Asserachrom® HPIA, Asserachrom® HPIA–IgG and Asserachrom® PF4 and STA®-Néoplastine® R15 assays). Opinion development
0106-02 Initial Ammonium dichromate 232-143-1 7789-09-5 Display Technologies Limited Industrial use of Ammonium Dichromate in the process of manufacturing Cathode Ray Tubes for head up displays intended to be used in military and civilian aircrafts Commission decided
0020-01 Initial Trichloroethylene 201-167-4 79-01-6 DOMO Caproleuna GmbH Industrial use as an extraction solvent for the purification of caprolactam from caprolactam oil Commission decided
0128-01 Initial Chromium trioxide 215-607-8 1333-82-0 Doosan Electro-Materials
Luxembourg SARL
Doosan Energy Solution Kft
Industrial formulation of a chromium trioxide solution below 0.1% w/w concentration for the passivation of copper foil used in the manufacture of Lithium Ion Batteries (LiB) for motorised vehicles Opinions adopted
0036-01 Initial Sodium dichromate 234-190-3
7789-12-0
10588-01-9
ELECTROQUÍMICA DE
HERNANI, S.A.
Use of Sodium dichromate as an additive for suppressing parasitic reactions and oxygen evolution, pH buffering and cathode corrosion protection in the electrolytic manufacture of sodium chlorate with or without subsequent production of chlorine dioxide or sodium chlorite Commission decided
0165-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Eli Lilly Kinsale Limited Industrial use of a 4-tert-octylphenol ethoxylate compound, as a patient safety viral inactivation reagent in the manufacture of human medicines produced from biological systems Opinion development
0077-01 Initial 1,2-Dichloroethane (EDC) 203-458-1 107-06-2 Eli Lilly Kinsale Limited [application transferred from original Applicant: Eli Lilly S.A. - Irish Branch due to a notified legal entity change] Industrial use as a reaction medium and a solvating agent in mediating subsequent chemical transformation reactions leading to the manufacture of an Active Pharmaceutical Ingredient, Raloxifene Hydrochloride Commission decided
0107-01 Initial 1,2-Dichloroethane (EDC) 203-458-1 107-06-2 emp Biotech GmbH Use as a solvent in manufacture of polymeric particles for pharmaceutical and research purification processes Commission decided
0017-01 Initial Trichloroethylene 201-167-4 79-01-6 ENTEK International Limited Trichloroethylene as an extraction solvent for removal of process oil and formation of the porous structure in polyethylene based separators used in lead-acid batteries Commission decided
0037-01 Initial Sodium dichromate 234-190-3
7789-12-0
10588-01-9
Ercros SA Use of Sodium dichromate as an additive for suppressing parasitic reactions and oxygen evolution, pH buffering and cathode corrosion protection in the electrolytic manufacture of sodium chlorate with or without subsequent production of chlorine dioxide or sodium chlorite Commission decided
0028-01 Initial Lead chromate 231-846-0 7758-97-6 Etienne LACROIX Industrial use of lead chromate in manufacture of pyrotechnical delay devices contained into ammunition for naval self-protection Commission decided
0083-01 Initial 1,2-Dichloroethane (EDC) 203-458-1 107-06-2 EURENCO Industrial use of 1,2-Dichloroethane as a solvent for the synthesis of Polyepichlorohydrin used as a precursor in the production of Glycidyl Azide Polymer, an oligomer with hydroxyl terminations used to increase the energetic performance of propellants and explosives Commission decided
0103-01 Initial Chromium trioxide 215-607-8 1333-82-0 Euro Cryospace France The use of chromium trioxide for the surface preparation of aluminium alloy cryogenic tanks used in the Ariane 5 launcher Commission decided
0052-01 Initial Chromium trioxide 215-607-8 1333-82-0 Federal Mogul Burscheid GmbH Functional chrome plating of piston rings for automotive engines as applied in the segments light vehicle petrol, light vehicle diesel, middle range diesel and heavy duty Commission decided
0050-01 Initial Chromium trioxide 215-607-8 1333-82-0 Federal-Mogul Friedberg GmbH Functional chrome plating of piston rings for two-stroke and four-stroke large bore engines as applied in the industrial sectors Construction & Industry, Power Generation, Railway and Maritime. Commission decided
0051-01 Initial Chromium trioxide 215-607-8 1333-82-0 Federal-Mogul Valvetrain GmbH Functional chrome plating of valves for the use in petrol and diesel engines for light-and heavy duty vehicles. Commission decided
0070-02 Initial Chromium trioxide 215-607-8 1333-82-0 FN HERSTAL S.A.
BROWNING VIANA, FABRICA DE ARMAS E ARTIGOS DE DESPORTO SA
Industrial use of chromium trioxide in the hard chromium coating of civilian firearms barrel bores and auxiliary parts subject to thermal, mechanical and chemical stresses, in order to provide a low friction coefficient as well as heat, corrosion and wear resistance properties. Commission decided
0070-01 Initial Chromium trioxide 215-607-8 1333-82-0 FN HERSTAL S.A.
MANROY ENGINEERING LTD
Industrial use of chromium trioxide in the hard chromium coating of military small- and medium-caliber firearms barrel bores and auxiliary parts subject to thermal, mechanical and chemical stresses, in order to provide hardness, heat resistance and thermal barrier properties, as well as corrosion resistance, adhesion and low friction properties Commission decided
0082-01 Initial 1,2-Dichloroethane (EDC) 203-458-1 107-06-2 GE Healthcare Bio-Sciences AB Industrial use of 1,2-dichloroethane as an emulsifying solvent in the manufacture of porous particles for beaded chromatography and cell culture media. Commission decided
0172-01 Initial 4-Nonylphenol, branched and linear, ethoxylated - - GE Healthcare Bio-Sciences AB Industrial use of emulsifiers containing nonylphenols ethoxylated for the manufacture of chromatography resins used by the biopharmaceutical industry, food & beverage sector and academia Opinion development
0062-02 Initial Potassium dichromate 231-906-6 7778-50-9 Gentrochema BV Use of potassium dichromate for surface treatment of metals such as aluminium, steel, zinc, magnesium, titanium, alloys, composites, sealings of anodic films. Opinions adopted
0062-01 Initial Potassium dichromate 231-906-6 7778-50-9 Gentrochema BV Formulation of mixtures of potassium dichromate for surface treatment of metals such as aluminium, steel, zinc, magnesium, titanium, alloys, composites, sealings of anodic films. Opinions adopted
0063-02 Initial Sodium dichromate 234-190-3
7789-12-0
10588-01-9
Gentrochema BV Use of Sodium dichromate for surface treatment of metals such as aluminium, steel, zinc, magnesium, titanium, alloys, composites and sealings of anodic films. Opinions adopted
0063-01 Initial Sodium dichromate 234-190-3
7789-12-0
10588-01-9
Gentrochema BV Formulation of mixtures of sodium dichromate for surface treatment of metals such as aluminium, steel, zinc, magnesium, titanium, alloys, composites, sealings of anodic films; and the electrolytic passivation of tin plated steel for the packaging industry. Opinions adopted
0063-03 Initial Sodium dichromate 234-190-3
7789-12-0
10588-01-9
Gentrochema BV Use of Sodium dichromate for the electrolytic passivation of tin plated steel for the packaging industry. Opinions adopted
0071-01 Initial Chromium trioxide 215-607-8 1333-82-0 Gerhardi Kunststofftechnik GmbH

C. Hübner GmbH

SAXONIA Galvanik GmbH

Simon Systems GmbH & Co. KG [name of co-applicant in the original application: Karl Simon GmbH & Co. KG updated due to a notified legal entity name change]

Galvanoplast Fischer Bohemia, s.r.o. [correction of the name of the original
Applicant: Fischer GmbH & Co. surface technologies KG and of the successor
Applicant: Fischer Surface Technologies GmbH]

Fischer Oberflächentechnologie GmbH [correction of the name of the original
Applicant: Fischer GmbH & Co. surface technologies KG and of the successor
Applicant: Fischer Surface Technologies GmbH]

WAFA Germany GmbH

Boryszew Oberflächentechnik Deutschland GmbH

Bolta Werke GmbH

Heinze Gruppe GmbH

C+C Krug GmbH

BIA Kunststoff- und Galvanotechnik GmbH & Co KG

Aludec Galvanic s.a.
Plating on Plastics for Automotive Applications (PoPAA) Opinions adopted
0034-02 Initial Chromium trioxide 215-607-8 1333-82-0 Grohe AG The use of Chromium Trioxide for a pre-treatment step (etching) in the electroplating process Commission decided
0034-01 Initial Chromium trioxide 215-607-8 1333-82-0 Grohe AG The use of Chromium trioxide for electroplating of different types of substrates with the purpose to create a long-lasting high durability surface with bright (shiny) or matte look (Functional electroplating with decorative character) Commission decided
0021-01 Initial Trichloroethylene 201-167-4 79-01-6 Grupa Azoty S.A. Industrial use as a process chemical in caprolactam purification Commission decided
0003-02 Initial Bis(2-ethylhexyl) phthalate (DEHP) 204-211-0 117-81-7 Grupa Azoty Zakłady Azotowe Kędzierzyn S.A. Industrial use in polymer processing by calendering, spread coating, extrusion, injection moulding to produce PVC articles [except erasers, sex toys, small household items (<10cm ) that can be swallowed by children, clothing intended to be worn against the bare skin; also toys, cosmetics and food contact material (restricted under other EU regulation)] Pending decision
0003-01 Initial Bis(2-ethylhexyl) phthalate (DEHP) 204-211-0 117-81-7 Grupa Azoty Zakłady Azotowe Kędzierzyn S.A. Formulation of DEHP in compounds, dry-blends and Plastisol formulations Pending decision
0081-01 Initial 1,2-Dichloroethane (EDC) 203-458-1 107-06-2 GRUPA LOTOS S.A. Use as an extraction solvent in the de-waxing of petroleum vacuum distillates and de-asphalted oil and de-oiling of slack wax for the production of base oils and paraffinic waxes. Commission decided
0113-01 Initial Sodium dichromate 234-190-3
7789-12-0
10588-01-9
Gruppo Colle.S.r.l. Use of Sodium dichromate as mordant in wool dyeing Commission decided
0080-01 Initial 1,2-Dichloroethane (EDC) 203-458-1 107-06-2 H&R Ölwerke Schindler GmbH
H&R Chemisch-Pharmazeutische Spezialitäten GmbH
Industrial use as a solvent and anti-solvent of the feedstock and intermediate product streams in the combined de-waxing and de-oiling of refining of petroleum vacuum distillates for the production of base oils and hard paraffin waxes Commission decided
0124-01 Initial Sodium dichromate 234-190-3 10588-01-9 H&R Ölwerke Schindler GmbH;
H&R Chemisch-Pharmazeutische Spezialitäten GmbH
Use of sodium dichromate as corrosion inhibitor in ammonia absorption deep cooling systems, applied for the dewaxing and deoiling process steps of petroleum raffinate. Commission decided
0114–01 Initial Chromium trioxide 215-607-8 1333-82-0 Hansgrohe SE The use of chromium trioxide for electroplating of different types of substrates with the purpose to create a long-lasting high durability surface with bright (shiny) or matte look (Functional plating with decorative character) Commission decided
0114–02 Initial Chromium trioxide 215-607-8 1333-82-0 Hansgrohe SE The use of chromium trioxide for a pre-treatment step (etching) in the electroplating process Commission decided
0064-02 Initial Chromium trioxide 215-607-8 1333-82-0 HAPOC GmbH & Co KG Use of Chromium trioxide in solid form and in aqueous solution of any composition to modify the properties of surfaces made of metal or plastic, with or without current flow, in category III. Opinions adopted
0064-01 Initial Chromium trioxide 215-607-8 1333-82-0 HAPOC GmbH & Co KG Use of chromium trioxide in dissolved and solid form to produce aqueous solutions of any composition for industrial application. Opinions adopted
0093-01 Initial Chromium trioxide 215-607-8 1333-82-0 HAPOC GmbH & Co KG Use of chromium trioxide in solid form and in aqueous solution of any composition to modify the properties of surfaces made of brass, bronze, copper and other copper alloys for medical engineering, aviation and automation products Opinions adopted
0064-03 Initial Chromium trioxide 215-607-8 1333-82-0 HAPOC GmbH & Co KG Use of chromium trioxide in solid form and in aqueous solution of any composition to modify the properties of surfaces made of metal or plastic, with or without current flow, in category II. Opinions adopted
0064-04 Initial Chromium trioxide 215-607-8 1333-82-0 HAPOC GmbH & Co KG Use of Chromium trioxide in solid form and in aqueous solution of any composition to modify the properties of surfaces made of metal or plastic, with or without current flow, in category I. Opinions adopted
0092-01 Initial Chromium trioxide 215-607-8 1333-82-0 HAPOC GmbH & Co KG Use of chromium trioxide in solid form and in aqueous solution of any composition to modify the properties of surfaces made of plastic, with or without current flow Opinions adopted
0112-01 Initial Sodium dichromate 234-190-3
7789-12-0
10588-01-9
HAPOC GmbH & Co KG Use of sodium dichromate in molten bath form to modify surfaces, especially by blackening, of delicate medical products, specifically micro-surgical instruments Commission decided
0045-01 Initial Dichromium tris(chromate) 246-356-2 24613-89-6 Henkel AG & Co. KGaA Henkel Global SupplyChain B.V. Formulation of Mixtures Opinions adopted
0045-02 Initial Dichromium tris(chromate) 246-356-2 24613-89-6 Henkel AG & Co. KGaA
Henkel Global
Supply Chain B.V.
Use of dichromium tris(chromate) for surface treatment of metals such as aluminium, steel, zinc, magnesium, titanium, alloys, composites, sealings of anodic films. Opinions adopted
0068-01 Initial Chromium trioxide 215-607-8 1333-82-0 Hoogovens Court Roll Surface Technologies V.O.F.
WAVEC GmbH
Trattamento Cilindri Laminazione S.r.l.
Walzen-Service-Center GmbH
NORD CHROME SAS
RHENAROLL SA
Texturing Technology Limited
NC POLAND Sp.z. o.o.
Functional chrome plating of work rolls used in the steel and aluminium industry. Commission decided
0133-02 Initial Chromium trioxide 215-607-8 1333-82-0 Ideal Standard - Vidima AD Etching of plastics with chromium trioxide as pre-treatment step for electroplating processes Opinions adopted
0133-01 Iitital Chromium trioxide 215-607-8 1333-82-0 Ideal Standard - Vidima AD;
Ideal Standard Produktions-GmbH;
Jado Iberia-Produtos Metalurgicos Sociedade Unipessoal LDA (withdrawn)
Electroplating of different types of substrates using chromium trioxide to achieve functional surfaces with high durability and a bright or matt silvery appearance for sanitary applications Opinions adopted
0105-01 Initial Sodium dichromate 234-190-3
7789-12-0
10588-01-9
ILARIO ORMEZZANO - SAI s.r.l. [name of applicant in the original application: Ilario Ormezzano Sai Spa updated due to a notified name change] Repackaging of Sodium Dichromate to be supplied as a mordant in the dyeing of wool as sliver and/or yarn with dark colours in industrial settings Opinions adopted
0105-02 Initial Sodium dichromate 234-190-3
7789-12-0
10588-01-9
ILARIO ORMEZZANO - SAI s.r.l. [name of applicant in the original application: Ilario Ormezzano Sai Spa updated due to a notified name change] Use of Sodium Dichromate as a mordant in the dyeing of wool as sliver and/or yarn with dark colours in industrial settings Opinions adopted
0121-01 Initial Pentazinc chromate octahydroxide 256-418-0 49663-84-5 Indestructible Paint Ltd. Formulation of mixtures Commission decided
0121-02 Initial Pentazinc chromate octahydroxide 256-418-0 49663-84-5 Indestructible Paint Ltd. Use of pentazinc chromate octahydroxide in stoved epoxy primer for corrosion protection of aircraft engine components in aerospace and aeroderivative applications Commission decided
0149-01 Initial Pitch, coal tar, high temp. 266-028-2 65996-93-2 Industrial Quimica del Nalon, S.A. Use of CTPht for manufacture of formulations for various industrial uses Opinion development
0013-01 Initial Hexabromocyclododecane (HBCDD), alpha-hexabromocyclododecane, beta-hexabromocyclododecane, gamma-hexabromocyclododecane
221-695-9
247-148-4
3194-55-6
25637-99-4
134237-50-6
134237-51-7
134237-52-8
INEOS Styrenics Netherlands BV
INEOS Styrenics Ribecourt SAS
INEOS Styrenics Wingles SAS
Synthos Dwory 7 spółka z ograniczoną odpowiedzialnością spółka komandytowo-akcyjna.
Synthos Kralupy a.s.
StyroChem Finland Oy
Monotez SA
RP Compounds GmbH
Synbra Technology bv
Sunpor Kunststoff GmbH
Dunastyr Polystyrene Manufacturing C. Co. Ltd
Versalis SpA
Unipol Holland bv
Formulation of flame retarded expanded polystyrene (EPS) to solid unexpanded pellets using hexabromocyclododecane as the flame retardant additive (for onward use in building applications) Authorisation expired
0013-02 Initial Hexabromocyclododecane (HBCDD), alpha-hexabromocyclododecane, beta-hexabromocyclododecane, gamma-hexabromocyclododecane
221-695-9
247-148-4
3194-55-6
25637-99-4
134237-50-6
134237-51-7
134237-52-8
INEOS Styrenics Netherlands BV
INEOS Styrenics Ribecourt SAS
INEOS Styrenics Wingles SAS
Synthos Dwory 7 spółka z ograniczoną odpowiedzialnością spółka komandytowo-akcyjna.
Synthos Kralupy a.s.
StyroChem Finland Oy
Monotez SA
RP Compounds GmbH
Synbra Technology bv
Sunpor Kunststoff GmbH
Dunastyr Polystyrene Manufacturing C. Co. Ltd
Versalis SpA
Unipol Holland bv
Manufacture of flame retarded expanded polystyrene (EPS) articles for use in building applications Authorisation expired
0075-01 Initial Sodium dichromate 234-190-3
7789-12-0
10588-01-9
Jacobs Douwe Egberts
DE GmbH
Dr. Otto Suwelack Nachf.
GmbH & Co. KG
Européenne de Lyophilisation S.A.
Use of sodium dichromate as a corrosion inhibitor in ammonia absorption deep cooling systems as applied in the industrial production of freeze dried products such as coffee, herbs, spices and comparable products. Commission decided
0169-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Janssen Vaccines & Prevention BV
Janssen Biologics B.V.
4-tert-Octylphenol ethoxylate is used as a lysing agent for the permeabilization of the host cell membrane to release adenovirus particles used for the manufacture of vaccines. Its use allows the selective elimination of enveloped adventitious viruses and is compatible with the chemicals needed to control the host cell DNA precipitation in the next process step. Opinion development
0155-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Kedrion S.p.A Use of 4-tert-OPnEO as Triton X-100 as detergent for virus inactivation in the manufacturing process of the human plasma-derived medicinal products Plasmagrade/Plasmasafe and Resusix, as well as Plasminogen (pre-commercialization name) and any subsequent commercialization brand Opinion development
0038-01 Initial Sodium dichromate 234-190-3
7789-12-0
10588-01-9
Kemira Chemicals Oy Use of Sodium dichromate as an additive for suppressing parasitic reactions and oxygen evolution, pH buffering and cathode corrosion protection in the electrolytic manufacture of sodium chlorate with or without subsequent production of chlorine dioxide or sodium chlorite Commission decided
0132-02 Initial Chromium trioxide 215-607-8 1333-82-0 KEUCO GmbH & Co KG Etching of plastics with chromium trioxide as pre-treatment step for electroplating processes Opinions adopted
0132-01 Initial Chromium trioxide 215-607-8 1333-82-0 KEUCO GmbH & Co KG Electroplating of different types of substrates using chromium trioxide to achieve functional surfaces with high durability and a bright or matt silvery appearance for sanitary applications Opinions adopted
0150-02 Initial Anthracene oil 292-602-7 90640-80-5 Koppers Denmark ApS Use of AO for manufacture of formulations for various industrial uses Opinion development
0150-01 Initial Pitch, coal tar, high temp. 266-028-2 65996-93-2 Koppers Denmark ApS Use of CTPht for manufacture of formulations for various industrial uses Opinion development
0029-01 Initial 1,2-Dichloroethane (EDC) 203-458-1 107-06-2 Laboratoires Expanscience Use as process and extracting solvent in the manufacture of plant-derived pharmaceutical bioactive ingredients Commission decided
0079-02 Initial 1,2-Dichloroethane (EDC) 203-458-1 107-06-2 Lanxess Deutschland GmbH Industrial use as a swelling agent and reaction medium during the phthalimidomethylation reaction of polystyrene-divinylbenzene copolymer beads in the manufacturing of anion exchange and chelating resins Commission decided
0079-01 Initial 1,2-Dichloroethane (EDC) 203-458-1 107-06-2 Lanxess Deutschland GmbH Industrial use as a swelling agent during the sulphonation reaction of polystyrene-divinylbenzene copolymer beads in the manufacturing of strong acid cation exchange resins Commission decided
0085-01 Initial Bis(2-methoxyethyl) ether (Diglyme) 203-924-4 111-96-6 Life Technologies AS Use of diglyme as a process chemical in the manufacture of Dynabeads. Commission decided
0011-02 Initial Diarsenic trioxide 215-481-4 1327-53-3 Linxens France SA Industrial use of diarsenic trioxide as processing aid in gold electroplating Commission decided
0011-01 Initial Diarsenic trioxide 215-481-4 1327-53-3 Linxens France SA Formulation of diarsenic trioxide into a mixture Commission decided
0087-01 Initial Bis(2-methoxyethyl) ether (Diglyme) 203-924-4 111-96-6 MAFLON S.P.A. Use of bis(2-methoxyethyl) ether (diglyme) as a carrier solvent in the formulation and subsequent application of sodium naphthalide etchant for fluoropolymer surface modification whilst preserving article structural integrity. Commission decided
0127-01 Initial Chromium trioxide 215-607-8 1333-82-0 MAHLE Ventiltrieb GmbH
MAHLE Polska Sp. z o.o.
Use of chromium trioxide in functional chrome plating of valves used in engines of light gasoline and diesel vehicles and in heavy duty diesel combustion engines Opinions adopted
0157-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Merck Biodevelopment SAS
FUJIFILM Diosynth Biotechnologies UK Limited
Use of 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated as a detergent in the purification process of G-CSF (Granulocyte Colony Stimulating Factor) inclusion bodies Opinion development
0091-01 Initial Bis(2-methoxyethyl) ether 203-924-4 111-96-6 Merck KGaA Industrial use of diglyme as solvent in the manufacturing process of cryptand intermediates for further conversion into cryptand 221 and cryptand 222 Commission decided
0120-01 Initial 1,2-dichloroethane (EDC) 203-458-1 107-06-2 Microbeads AS Industrial use as a swelling agent during the sulfonation reaction of crosslinked polystyrene beads in the manufacture of ion exchange resins for purification of radioactive waste Commission decided
0049-01 Initial Ammonium dichromate 232-143-1 7789-09-5 Micrometal GmbH The use of Ammonium dichromate (ADC) as a photosensitizer for production of micro components Commission decided
0016-01 Initial Trichloroethylene 201-167-4 79-01-6 Microporous GmbH Trichloroethylene used as degreasing solvent in the manufacture of polyethylene separators for lead-acid batteries Commission decided
0066-01 Initial Chromium trioxide 215-607-8 1333-82-0 MTU Aero Engines AG Functional chrome plating for aerospace applications for civil and military uses, comprising coating of new components for aircraft engines as well as maintenance, repair and overhaul work on aircraft engine components Commission decided
0066-02 Initial Chromium trioxide 215-607-8 1333-82-0 MTU Aero Engines AG Surface treatment for aerospace applications for civil and military uses, comprising treatment of new components for aircraft engines as well as maintenance, repair and overhaul work on aircraft engine components, unrelated to functional chrome plating Commission decided
0125-01 Initial Bis(2-methoxyethyl) ether 203-924-4 111-96-6 N.V. Ajinomoto OmniChem S.A. Use of diglyme as a solvent for the synthesis of the anti-HIV active pharmaceutical ingredient (API) dapivirine. Commission decided
0057-02 Initial Chromium trioxide 215-607-8 1333-82-0 Nexter Mechanics Industrial use of a mixture of chromium trioxide for the hard chromium plating of military armament parts in order to ensure surface hardness, resistance to atmospheric corrosion, abrasive wear resistance and friction coefficient for parts in relative movement. Commission decided
0057-01 Initial Chromium trioxide 215-607-8 1333-82-0 Nexter Mechanics Industrial use of a mixture of chromium trioxide for the hard chromium plating of military armament steels parts which are thermomechanically stressed and in contact with oxidizing gas at high temperature, so as to ensure a thermal barrier with high melting point, resistance to wear and oxidation associated with weapons as well as resistance to impact and atmospheric corrosion. Commission decided
0057-03 Initial Chromium trioxide 215-607-8 1333-82-0 Nexter Mechanics Industrial use of a mixture of chromium trioxide for the black colour hard chromium plating of exterior surface of steel weapon barrel designed for military use, to ensure, during the whole gun barrel service life, stealth, erosion, corrosion and high temperature resistances in the condition of uses. Commission decided
0057-04 Initial Chromium trioxide 215-607-8 1333-82-0 Nexter Mechanics
Nexter Systems
Industrial use, of a qualified mixture of chromium trioxide by spraying or immersion, and of a qualified mixture of dichromium tris(chromate) by pen application, for the chromate conversion coating of welded mechanical structures of armoured vehicles and associated parts made of high mechanical properties aluminium alloys for military use, and requiring a maintained electrical conductivity after severe climatic environments, atmospheric corrosion resistance and paint adhesion. Commission decided
0057-05 Initial Dichromium tris(chromate) 246-356-2 24613-89-6 Nexter Systems Industrial use, of a qualified mixture of chromium trioxide by spraying or immersion, and of a qualified mixture of dichromium tris(chromate) by pen application, for the chromate conversion coating of welded mechanical structures of armoured vehicles and associated parts made of high mechanical properties aluminium alloys for military use, and requiring a maintained electrical conductivity after severe climatic environments, atmospheric corrosion resistance and paint adhesion. Commission decided
0010-01 Initial Diarsenic trioxide 215-481-4 1327-53-3 Nordenhamer Zinkhütte GmbH Industrial use of diarsenic trioxide to produce a copper concentrate in the purification of the leaching solution in a zinc electrowinning process Commission decided
0061-01 Initial Bis(2-methoxyethyl) ether (Diglyme) 203-924-4 111-96-6 Novartis Ringaskiddy Limited Use of diglyme as solvent in the manufacturing process of an intermediate for further conversion into a pharmaceutical compound used in medicinal products for treatment of respiratory diseases Commission decided
0162-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Novo Nordisk A/S Use of 4-(1,1,3,3-tetramethylbutyl) phenol, ethoxylated as a solvent/detergent agent for virus inactivation in the manufacture of pharmaceutical products used in the treatment of rare bleeding disorders. Opinion development
0159-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Nuova Ompi S.r.l. unipersonale Use of Octylphenolethoxylates as emulsifier in the siliconisation of glass containers used as primary packaging for one specific medicinal product (NeoRecormon®) of one pharmaceutical company. Opinion development
0170-02 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Octapharma AB Use of 4-(1,1,3,3-tetramethylbutyl) phenol, ethoxylated as component of a chromatography column regeneration solution during the manufacture of a recombinant-derived Factor VIII Opinion development
0170-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Octapharma AB
Octapharma Pharmazeutika Produktionsgesellschaft m.b.H
Octapharma S.A.S.
Octapharma Produktionsgesellschaft Deutschland mbH
Use of 4-(1,1,3,3-tetramethylbutyl) phenol, ethoxylated as detergent for a virus inactivation step (solvent/detergent treatment) during the manufacture of plasma-derived and recombinant medicinal products Opinion development
0111-02 Initial 1,2-Dichloroethane (EDC) 203-458-1 107-06-2 OLON Spa The use of 1,2 dichloroethane (1,2-DCE) as a solvent in the manufacturing of the active pharmaceutical ingredient prednisolone steaglate. Commission decided
0111-01 Initial 1,2-Dichloroethane (EDC) 203-458-1 107-06-2 OLON Spa The use of 1,2 dichloroethane (1,2-DCE) as a solvent in the manufacturing of the active pharmaceutical ingredient for epirubicin. Commission decided
0108-02 Initial 1,2-Dichloroethane (EDC) 203-458-1 107-06-2 ORGAPHARM Use as an process solvent in the manufacture of an Active Pharmaceutical Ingredient: Nefopam hydrochloride Commission decided
0108-01 Initial 1,2-Dichloroethane (EDC) 203-458-1 107-06-2 ORGAPHARM Use as a process solvent in the manufacture of an Active Pharmaceutical Ingredient: Flecainide acetate Commission decided
0139-01 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Ortho-Clinical Diagnostics Formulation of 4-(1,1,3,3-Tetramethylbutyl) phenol, ethoxylated (as Triton X-100) for use in the manufacture of in vitro diagnostic VITROS® products used for infectious disease screening, endocrinology, and oncology testing. Opinion development
0139-02 Initial 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated - - Ortho-Clinical Diagnostics Use of 4-(1,1,3,3-Tetramethylbutyl) phenol, ethoxylated (as Triton X-100) in two in vitro diagnostic VITROS® products used by professional diagnostic laboratories to detect antibodies to human hepatitis A virus and IgG antibodies to rubella virus. Opinion development
0033-01 Initial Chromium trioxide 215-607-8 1333-82-0 Oy Kromatek Ab; Kova-Kromi Oy; CrTe-Plating Oy; Saizeri Plating Oy; Turun Kovakromi Oy; Veljekset Wallenius Oy; Pirkan Kovakromaus Oy Use of chromium trioxide in Cr(VI) based functional plating Commission decided
0019-01 Initial Trichloroethylene 201-167-4 79-01-6 Parker Hannifin Manufacturing Netherlands (Filtration & Separation) BV Use of trichloroethylene (TCE) as a process solvent for the manufacturing of modules containing hollow fibre gas separation membranes Commission decided
0123-01 Review report Bis(2-ethylhexyl) phthalate 204-211-0 117-81-7 Plastic Planet srl Formulation of recycled soft PVC containing DEHP in compounds and dry-blends Opinions adopted
0123-02 Review report Bis(2-ethylhexyl) phthalate 204-211-0 117-81-7 Plastic Planet srl Industrial use of recycled soft PVC containing DEHP in polymer processing by calendering, extrusion, compression and injection moulding to produce the following PVC articles: (1) articles used outside of the interior space in applications in the field of construction, civil engineering, garden features such as ponds and roofing, agriculture (including horticulture) and industrial workplaces without potential for mouthing or prolonged contact with human skin or any contact with mucous membranes; (2) articles used in interior space in industrial and agricultural workplaces; or (3) footwear used in professional, industrial and/or agricultural workplaces. Opinions adopted
0089-01 Initial Bis(2-methoxyethyl) ether 203-924-4 111-96-6 PMC ISOCHEM [application transferred from original Applicant: ISOCHEM due to a notified legal entity change] Use of diglyme as a process solvent in one step of the manufacturing of an Active Pharmaceutical Ingredient used in an anti-protozoal drug Commission decided
0090-01 Initial Formaldehyde, oligomeric reaction products with aniline 500-036-1 25214-70-4 Polynt Composites France Formulation of an epoxy resin hardener containing technical MDA Commission decided
0090-02 Initial Formaldehyde, oligomeric reaction products with aniline 500-036-1 25214-70-4 Polynt Composites France Industrial use of an epoxy resin hardener containing technical MDA aimed at immobilising spent ion exchange resins in a high containment matrix Commission decided
0047-02 Initial Potassium hydroxyoctaoxodizincatedichromate 234-329-8 11103-86-9 PPG Industries (UK) Ltd
Finalin GmbH
PPG Central (UK) Ltd in its legal capacity as Only Representative of PRC DeSoto International Inc. - OR5
PPG Coatings SA
Boeing Distribution, Inc. [name of applicant in the original application: Aviall Services Inc updated due to a notified change of corporate name]
Use of potassium hydroxyoctaoxodizincatedichromate in paints, in primer, sealants, and coatings (including as wash primers) Opinions adopted
0047-01 Initial Potassium hydroxyoctaoxodizincatedichromate 234-329-8 11103-86-9 PPG Industries (UK) Ltd
Finalin GmbH
PPG Central (UK) Ltd in its legal capacity as Only Representative of PRC DeSoto International Inc. - OR5
PPG Coatings SA
Boeing Distribution, Inc. [name of applicant in the original application: Aviall Services Inc updated due to a notified change of corporate name]
Formulation of Mixtures Opinions adopted
0054-02 Initial Chromium trioxide 215-607-8 1333-82-0 Praxair Surface Technologies GmbH Industrial spraying of chromium trioxide mixtures for the coating of metallic articles subject to harsh environment to ensure either a low temperaturecured coating for corrosion protection, or a high temperature corrosion & oxidation resistance with reduction of surface roughness or a high temperature adhesive, for aviation, power generation machinery, Oil and Gas and marine applications. Commission decided
0054-01 Initial Chromium trioxide 215-607-8 1333-82-0 Praxair Surface Technologies GmbH Industrial spraying or brush application of chromium trioxide mixtures for the coating of metallic articles subject to harsh environment, to ensure a high temperature corrosion & oxidation resistance, as well as anti-fouling properties or lubricity at high temperature, for automotive, aviation, power generation machinery, Oil and Gas and marine applications. Commission decided
0027-01 Initial Trichloroethylene 201-167-4 79-01-6 RAG Aktiengesellschaft, RAG Anthrazit Ibbenbüren GmbH Use of Tricholoroethylene-containing vulcanising and bonding agents for endless connections and repair of chloroprene rubber coated conveyor belts in underground hard coal mining Commission decided



Categories Display

Označeno kao:

(kliknite na oznaku za pretraživanje odgovarajućeg sadržaja)


Route: .live2