Saut au contenu
Saut au contenu

Substance Information

Affichage de contenus web

Infocards are automatically generated based on industry data. What is an infocard?

Tar bases, coal, aniline fraction

The distillation fraction boiling in the range of approximately 180°C to 200°C (356°F to 392°F) from the crude bases obtained by dephenolating and debasing the carbolated oil from the distillation of coal tar. It contains chiefly aniline, collidines, lutidines and toluidines.

Help Substance identity

The ‘Substance identity’ section is calculated from substance identification information from all ECHA databases. The substance identifiers displayed in the InfoCard are the best available substance name, EC number, CAS number and/or the molecular and structural formulas.

Some substance identifiers may have been claimed confidential, or may not have been provided, and therefore not be displayed.

EC (European Community) Number

The EC Number is the numerical identifier for substances in the EC Inventory. The EC Inventory is a combination of three independent European lists of substances from the previous EU chemicals regulatory frameworks (EINECS, ELINCS and the NLP-list). More information about the EC Inventory can be found here.

If the substance was not covered by the EC Inventory, ECHA attributes a list number in the same format, starting with the numbers 6, 7, 8 or 9.

The EC or list number is the primary substance identifier used by ECHA.

CAS (Chemical Abstract Service) registry number

The CAS number is the substance numerical identifier assigned by the Chemical Abstracts Service, a division of the American Chemical Society, to substances registered in the CAS registry database. A substance identified primarily by an EC or list number may be linked with more than one CAS number, or with CAS numbers that have been deleted. More information about CAS and the CAS registry can be found here.

Molecular formula

The molecular formula identifies each type of element by its chemical symbol and identifies the number of atoms of each element found in one discrete molecule of the substance. This information is only displayed if the substance is well–defined, its identity is not claimed confidential and there is sufficient information available in ECHA’s databases for ECHA’s algorithms to generate a molecular structure.

Molecular structure

The molecular structure is based on structures generated from information available in ECHA’s databases. If generated, an InChI string will also be generated and made available for searching. This information is only displayed if the substance is well-defined, its identity is not claimed confidential and there is sufficient information available in ECHA’s databases for ECHA’s algorithms to generate a molecular structure.

More help available here.

EC / List no.: 295-541-4

CAS no.: 92062-27-6

Mol. formula:

formula
Help Hazard classification and labelling

The ‘Hazard classification and labelling’ section shows the hazards of a substance based on the standardised system of statements and pictograms established under the CLP (Classification Labelling and Packaging) Regulation. The CLP Regulation makes sure that the hazards presented by chemicals are clearly communicated to workers and consumers in the European Union. The CLP Regulation uses the UN Global Harmonised System (GHS) and European Union Specific Hazard Statements (EUH).

This section is based on three sources for information (harmonised classification and labelling (CLH), REACH registrations and CLP notifications). The source of the information is mentioned in the introductory sentence of the hazard statements. When information is available in all sources, the first two are displayed as a priority.

Please note:

The purpose of the information provided under this section is to highlight the substance hazardousness in a readable format. It does not represent a new labelling, classification or hazard statement, neither reflect other factors that affect the susceptibility of the effects described, such as duration of exposure or substance concentration (e.g. in case of consumer and professional uses). Other relevant information includes the following:

  • Substances may have impurities and additives that lead to different classifications. If at least one company has indicated that the substance classification is affected by impurities or additives, this will be indicated by an informative sentence. However, substance notifications in the InfoCard are aggregated independently of the impurities and additives.
  • Hazard statements were adapted to improve readability and may not correspond textually to the hazard statements codes description in the European Union Specific Hazard Statements (EUH) or the UN Global Harmonised System (GHS).

To see the full list of notified classifications and to get more information on impurities and additives relevant to classification please consult the C&L Inventory.

More information about Classification and Labelling is available in the Regulations section of ECHA website.

More help available here.

Harmonised classification and labelling (CLH)

Harmonised classification and labelling is a legally binding classification and labelling for a substance, agreed at European Community level. Harmonisation is based on the substance’s physical, toxicological and eco-toxicological hazard assessment.

The ‘Hazard classification’ and labelling section uses the signal word, pictogram(s) and hazard statements of the substance under the harmonised classification and labelling (CLH) as its primary source of information.

If the substance is covered by more than one CLH entry (e.g. disodium tetraborate EC no. 215–540–4, is covered by three harmonisations: 005–011–00–4; 005–011–01–1 and 005–011–02–9), CLH information cannot be displayed in the InfoCard as the difference between the CLH classifications requires manual interpretation or verification. If a substance is classified under multiple CLH entries, a link to the C&L Inventory is provided to allow users to view CLH information associated with the substance and no text is automatically generated for the InfoCard.

It is possible that a harmonisation is introduced through an amendment to the CLP Regulation. In that case, the ATP (Adaptation to Technical Progress) number is displayed.

More info on CLH can be found here.

Classification and labelling under REACH

If available, additional information on classification and labelling (C&L) is derived from REACH registration dossiers submitted by industry. This information has not been reviewed or verified by ECHA, and may change without prior notice. REACH registration dossiers have greater data requirements (such as supporting studies) than do notifications under CLP.

Notifications under the Classification Labelling and Packaging (CLP) Regulation

If no EU harmonised classification and labelling exists and the substance was not registered under REACH, information derived from classification and labelling (C&L) notifications to ECHA under CLP Regulation is displayed under this section. These notifications can be provided by manufacturers, importers and downstream users. ECHA maintains the C&L Inventory, but does not review or verify the accuracy of the information.

Note that for readability purposes, only the pictograms, signal words and hazard statements referred in more than 5% of the notifications under CLP are displayed.

GHS08: Serious Health Hazard

Danger! According to the harmonised classification and labelling (ATP01) approved by the European Union, this substance may cause genetic defects and may cause cancer.

Help Properties of concern

The ‘Properties of concern’ section shows ECHA-assigned graphical indicators for certain substance properties that are regarded as being of relevance or importance to human health and/or the environment based on the information provided to the Agency.

Properties of concern are calculated at four "levels" of certainty:

  • "Recognised" - meaning that the concern is indicated in an official source; either a Harmonised C&L (CLP Regulation Annex VI) or in the Candidate list of substances of very high concern for authorisation (REACH). Recognised concerns are illustrated with a dark red icon.
  • "Potential" - again comes from official sources only. For (C), (M), and (R) it means that the concern is suspected in a Harmonised C&L (CLP Regulation Annex VI), as Carc. 2, Muta. 2, or Repr. 2. For (PBT) and (ED) Potential means that the concern is under assessment in the PBT or ED assessment list, and the outcome is not "Not PBT" or "Not ED". There are no potential (Ss) or (Sr)s. Potential concerns are illustrated with a light red icon.
  • "Broad agreement" - comes from data submitted by industry to ECHA, and indicates that the data submitted is aligned, with >= 50% of the data submitters providing the same concern. Broad agreement concerns are illustratated with a solid outlined circle icon.
  • "Minority position" - comes from data submitted by industry to ECHA, and indicates that the data submitted is not aligned. > 5% and < 50% of the data submitters have provided the concerns indicated at this "level". Minority position concerns are illustrated with a greyed out circle icon.

The following properties of concern are calculated:

  • Carcinogenic (C) – Recognised carcinogen: comes from a harmonised C&L classifying the substance as Carc. 1A or 1B and/or an entry in the Candidate list. Potential carcinogen: comes from a harmonised C&L classifying the substance as a suspected carcinogen Carc.2. Broad agreement: comes from industry data where a majority of data submitters agree the substance is carcinogenic. Minority position: comes from industry data where a minority of data submitters indicate the substance is carcinogenic. More information about carcinogenicity here.
  • Mutagenic (M) – Recognised mutagen: comes from a harmonised C&L classifying the substance as Muta. 1A or 1B and/or an entry in the Candidate list. Potential mutagen: comes from a harmonised C&L classifying the substance as a suspected mutagen Muta. 2. Broad agreement: comes from industry data where a majority of data submitters agree the substance is mutagenic. Minority position: comes from industry data where a minority of data submitters indicate the substance is mutagenic. More information about mutagenicity here.
  • Toxic to Reproduction (R) – Recognised as toxic to reproduction: comes from a harmonised C&L classifying the substance as Carc. 1A or 1B and/or an entry in the Candidate list. Potentially toxic to reproduction: comes from a harmonised C&L classifying the substance as suspected toxic to reproduction Repr. 2. Broad agreement: comes from industry data where a majority of data submitters agree the substance is toxic to reproduction. Minority position: comes from industry data where a minority of data submitters indicate the substance is toxic to reproduction. More information about reproductive toxicity here.
  • Skin sensitising (Ss) – Recognised skin sensitiser: comes from a harmonised C&L classifying the substance as Skin Sens. 1, 1A, or 1B. Broad agreement: comes from industry data where a majority of data submitters agree the substance is a skin sensitiser. Minority position: comes from industry data where a minority of data submitters indicate the substance is skin sensitising. More information about skin sensitiser here.
  • Respiratory sensitising (Sr) – Recognised respiratory sensitiser: comes from a harmonised C&L classifying the substance as Resp. Sens. 1, 1A, or 1B and/or an entry in the Candidate list. Broad agreement: comes from industry data where a majority of data submitters agree the substance is a respiratory sensitiser. Minority position: comes from industry data where a minority of data submitters indicate the substance is a respiratory sensitiser. More information about respiratory sensitiser here.
  • PBT – Recognised Persistent, bioaccumulative and toxic (PBT): comes from an entry in the Candidate list. Potential PBT: is shown for substances under assessment, and comes from an entry in the PBT assessment list, if the outcome is not final and “Not PBT”. Broad agreement: comes from industry data where a majority of data submitters agree the substance is PBT. Minority position: comes from industry data where a minority of data submitters indicate the substance is PBT. More information about persistent, bioaccumulative and toxic substances here.
  • ED – Recognised Endocrine Disruptor (ED): comes from an entry in the Candidate list. Potential ED: is shown for substances under assessment, and comes from an entry in the ED assessment list, if the outcome is not final and “Not ED”. At this time there is no explicit possibility for industry to indicate their opinion on ED status for substances. If and when this possibility exists it is proposed that industry data also be included in the ED property of concern calculation. More information about endocrine disrupting substances here.

The substance properties displayed in this section are derived from Harmonised classification and labelling (CLH) data, entries in the Candidate list of substances of very high concern for authorisation, the PBT assessment list, the ED assessment list, REACH registered dossier data and from notifications made under CLP. A prioritisation hierarchy means that data is taken from harmonised C&L data and regulatory lists first, then REACH registrations and finally from CLP notifications.

Impurities or additives: When a specific critical property is calculated from industry data and where the majority of data submitters have indicated that the property relates to cases containing impurities and/or additives, then the respective critical property icon is modified with an asterisk (*).

  • C

Carcinogenic

  • M

Mutagenic

about INFOCARD - Last updated: 03/07/2019 InfoCard

The InfoCard summarises the non-confidential data of a substance held in the databases of the European Chemicals Agency (ECHA). InfoCards are generated automatically based on the data available at the time of generation.

The quality and correctness of the information submitted to ECHA remains the responsibility of the data submitter. The type of uses and classifications may vary between different submissions to ECHA and for a full understanding it is recommended to consult the source data. Information on applicable regulatory frameworks is also automatically generated and may not be complete or up to date. It is the responsibility of the substance manufacturers and importers to consult official publications, e.g. the electronic edition of the Official Journal of the European Union.

InfoCards are updated when new information is available. The date of the last update corresponds to the publication date of the InfoCard and not necessarily to the date in which the update occurred in the source data.

More help available here.

Help Help

Key datasets

Help Help

Regulatory context

Here you can find all of the regulations and regulatory lists in which this substance appears, according to the data available to ECHA. This substance has been found in the following regulatory activities (directly, or inheriting the regulatory context of a parent substance):

REACH - Registration, Evaluation, Authorisation and Restriction of Chemicals Regulation
CLP - Classification, Labelling and Packaging
  • A list of substances for which classification and labelling data have been notified to ECHA by manufacturers or importers.
Previous Legislations
  • Substances listed in the EINECS, ELINCS, or NLP inventories.
Help Help

Substance names and other identifiers

Regulatory process names
[The distillation fraction boiling in the range of approximately 180 °C to 200 °C (356 °F to 392 °F) from the crude bases obtained by dephenolating and debasing the carbolated oil from the distillation of coal tar. It contains chiefly aniline, collidines, lutidines and toluidines.]
The distillation fraction boiling in the range of approximately 180°C to 200°C (356°F to 392°F) from the crude bases obtained by dephenolating and debasing the carbolated oil from the distillation of coal tar. It contains chiefly aniline, collidines, lutidines and toluidines.
C&L Inventory
Distillate Bases
The distillation fraction boiling in the range of approximately 180°C to 200°C (356°F to 392°F) from the crude bases obtained by dephenolating and debasing the carbolated oil from the distillation of coal tar. It contains chiefly aniline, collidines, lutidines and toluidines.
C&L Inventory
Tar bases, coal, aniline fraction
EC Inventory, C&L Inventory, Pre-Registration process
Translated names
(Destillatsiooni fraktsioon, mis keeb umbes vahemikus 180°C –200 °C, mis saadakse kivisöetõrva destilleerimisel saadud karboleeritud õlist fenoolide ja aluste eemaldamisel. Sisaldab peamiselt aniliini, kollidiine, lutidiine ja toluidiine.) (et)
C&L Inventory
[Destilacijska frakcija z vreliščem v območju približno med 180 °C in 200 °C iz surovih baz dobljenih z odstranitvijo fenola in baz fenolnega olja iz destilacije premogovega katrana. Pretežno vsebuje anilin, kolidine, lutidine in toluidine.] (sl)
C&L Inventory
[Destilačná frakcia s teplotou varu v rozmedzí približne od 180 °C do 200 °C zo zmesi surových zásad získavaných pri odstránení fenolov a zásad z karbolového oleja, získavaného destiláciou uhoľného dechtu. Tento produkt obsahuje predovšetkým anilín, dimetylpyridíny, toluidíny a trimetylpyridíny.] (sk)
C&L Inventory
[Destilační frakce s rozmezím teploty varu přibližně 180 °C až 200 °C ze surových bází získaná odstraněním bází a fenolů z karbolového oleje, které se získaly destilací černouhelného dehtu. Obsahuje zejména anilin, kollidiny, lutidiny a toluidiny.] (cs)
C&L Inventory
[Destillasjonsfraksjon, med omtrentlig kokepunktsintervall fra 180 °C til 200 °C (356 °F til 392 °F), fra råbasene dannet ved fjerning av fenoler og baser fra den karboliserte oljen fra destillasjon av stenkulltjære. Består hovedsakelig av anilin, kollidiner, lutidiner og toluidiner.] (no)
C&L Inventory
[Destillationsfraktion, die im Bereich von etwa 180 °C bis 200 °C siedet und aus den Rohbasen erhalten wird, indem aus dem Öl aus der Destillation von Kohlenteer Phenol und Basen entfernt werden; enthält hauptsächlich Anilin, Kollidine, Lutidine und Toluidine] (de)
C&L Inventory
[Destilāta frakcija no jēlbāzēm ar aptuvenu viršanas temperatūru no 180°C līdz 200°C (356°F līdz 392°F), iegūta, atbrīvojot akmeņogļu darvas destilācijā iegūtu karbolētu eļļu no fenola un no bāzēm. Tā galvenokārt satur anilīnu, kolidīnus, lutidīnus un toluidīnus.] (lv)
C&L Inventory
[Fracţia de distilare cu punct de fierbere la temperaturi la aproximativ 180°C şi 200°C (356°F şi 392°F), din bazele brute obţinute prin defenolare şi îndepărarea bazelor din uleiul carbolat obţinut prin distilarea gudronului de cărbune. Conţine mai ales anilină, colidine, lutidine şi toluidine]. (mt)
C&L Inventory
[Frakcija destilacije koja vrije u području približno 180 °C do 200 °C dobivena iz sirovih baza defenolacijom i uklanjanjem baza karbolnog ulja iz destilacije ugljenog katrana. Sadrži uglavnom anilin, kolidine, lutidine i toluidine.] (hr)
C&L Inventory
[Frakcja destylacyjna wrząca w zakresie temperatur od ok. 180 do 200°C (356°F do 392°F) z surowych zasad otrzymanych przez odfenolowanie i usunięcie zasad z oleju karbolowego z destylacji smoły węglowej. Składa się głównie z aniliny, kolidyn (trimetylopirydyn), lutydyn (dimetylopirydyn) i toluidyn]. (pl)
C&L Inventory
[Kőszénkátrány desztillációjából származó karbolsavas olaj fenol mentesítésével és bázismentesítésével nyert nyers bázisok azon desztillátum frakciója, mely közelítőleg a 180°C-tól 200°C-ig (356°F-től 92°F-ig) terjedő tartományban forr. Főleg anilint, kollidineket, lutidineket és toluidineket tartalmaz.] (hu)
C&L Inventory
[Tislausjae, joka kieluu noin alueella 180°C-200°C (356°F-392°F) ja saadaan raakaemäksistä, jotka on saatu poistamalla fenolit emäkset kivihiilitervan tislauksesta saatu karboloitu öljy. Pääasiallinen koostumus: aniliini ja kollidiinit, lutidiinit ja toluidiinit. (fi)
C&L Inventory
[Žalių bazių, gautų šalinant fenolius ir bazes iš fenolio alyvos, gautos distiliuojant akmens anglių degutą, distiliavimo frakcija, kurios virimo temperatūra maždaug nuo 180 °C iki 200 °C (nuo 356 °F iki 392 °F). Ją sudaro daugiausia anilinas, trimetilpiridinai, dimetilpiridinai ir toluidinai.] (lt)
C&L Inventory
[Το κλάσμα που αποστάζει μεταξύ 180°C και 200°C περίπου από την απόσταξη ακατέργαστων βάσεων, οι οποίες λαμβάνονται με απομάκρυνση της φαινόλης και των βάσεων από το φαινολικό έλαιο που προκύπτει από την απόσταξη λθανθρακόπισσας. Περιέχει κυρίως ανιλίνη, κολλιδίνες, λουτιδίνες και τολουϊδίνες.] (el)
C&L Inventory
[Дестилационна фракция, с температура на кипене в интервала приблизително от 180 °C до 200 °C (356 °F до 392 °F) от сурови основи, получени след отстраняване на фенолите и основите от фенолната фракция от дестилацията на каменовъглен катран. Съдържа основно анилин, колидини, лутидини и толуидини.] (bg)
C&L Inventory
Basedestillater (da)
C&L Inventory
bases de alquitrán, hulla, fracción de anilina (es)
C&L Inventory
Bases de goudron de houille, fraction aniline (fr)
C&L Inventory
bases destiladas (es)
C&L Inventory
bases distillées (fr)
C&L Inventory
Bases do alcatrão, carvão, fracção da anilina (pt)
C&L Inventory
basi di catrame, carbone, frazione anilina (it)
C&L Inventory
basi distillate (it)
C&L Inventory
Baze distilate (mt)
C&L Inventory
Baze gudronice, cărbune, fracţia anilinică (mt)
C&L Inventory
Darvas bāzes, akmeņogles, anilīna frakcija (lv)
C&L Inventory
De destillatiefractie met een kooktraject van ongeveer 180°C tot 200°C die afkomstig is uit de ruwe basen die worden verkregen door de verwijdering van fenolen en basen uit de gefenoliseerde olie die afkomstig is uit de destillatie van koolteer. Bevat voornamelijk aniline, collidinen, lutidinen en toluïdinen. (nl)
C&L Inventory
Deguto bazės, akmens anglys, anilino frakcija (lt)
C&L Inventory
Dehtové báze, černouhelné, anilinová frakce (cs)
C&L Inventory
Destilatne baze (hr)
C&L Inventory
destilirane baze (sl)
C&L Inventory
Destillaatalused (et)
C&L Inventory
Destillat-Basen (de)
C&L Inventory
destillatbaser (no)
C&L Inventory
Destillationsfraktion, med ungefärligt kokpunktsintervall från 180 °C till 200 °C, erhållen från råbaserna genom avlägsnande av fenoler och baser från den karboliserade oljan från destillation av stenkolstjära. Består främst av anilin, kollidiner, lutidiner och toluidiner. (sv)
C&L Inventory
Destillationsfraktionen med kogeinterval omtrent fra 180°C til 200 °C (356 ºF til 392 ºF), fra råbaser opnået ved at fjerne phenoler og baser fra den carbolerede olie fra destillationen af stenkulstjære. Den indeholder hovedsagelig anilin, collidiner, lutidiner og toluidiner. (da)
C&L Inventory
Destillerade baser (sv)
C&L Inventory
Destilát bází (cs)
C&L Inventory
destiláty zásad (sk)
C&L Inventory
Destilātu bāzes (lv)
C&L Inventory
Destylat zasadowy (pl)
C&L Inventory
Desztillátum bázisok (hu)
C&L Inventory
Distiliato bazės (lt)
C&L Inventory
fracción de la destilación, con un intervalo de ebullición aproximado de 180 °C a 200 °C de las bases crudas obtenidas desfenolando y desbasificando el aceite fenicado de la destilación de alquitrán de hulla; contiene principalmente anilina, colidinas, lutidinas y toluidinas (es)
C&L Inventory
Fraction de distillation dont l'intervalle d'ébullition s'étend approximativement de 180°C à 200°C et qui est issue des bases brutes obtenues par élimination des phénols et des bases de l'huile phénolée issue de la distillation du goudron de houille. Se compose principalement d'aniline, de collidines, de lutidines et de toluidines. (fr)
C&L Inventory
Fracção da destilação que destila no intervalo aproximado de 180 °C a 200 °C, proveniente das bases brutas obtidas por desfenolização e desbasificação do óleo carbólico proveniente da destilação de alcatrão de carvão. É constituída sobretudo por anilina, colidinas, lutidinas e toluidinas. (pt)
C&L Inventory
Frazione di distillazione con intervallo di ebollizione 180°C-200°C ca. (da 356°F a 392°F) da basi grezze ottenute per eliminazione dei fenoli e delle basi dall'olio carbolico da distillazione di catrame di carbone. Contiene principalmente anilina, collidine, lutidine e toluidine. (it)
C&L Inventory
Gedestilleerde teerbasen (nl)
C&L Inventory
katranske baze, premog, anilinska frakcija (sl)
C&L Inventory
Katranske baze, ugljen, anilinska frakcija, (hr)
C&L Inventory
Kátrány bázisok, kőszén, anilin frakció (hu)
C&L Inventory
Smoły zasadowe, węgiel, frakcja anilinowa (pl)
C&L Inventory
Teerbasen, Kohle, Anilinfraktion (de)
C&L Inventory
Teerbasen, kool, anilinefractie (nl)
C&L Inventory
Tervaemäkset, kivihiili, aniliinifraktio (fi)
C&L Inventory
Tisle-emäkset (fi)
C&L Inventory
Tjärbaser, kol-, anilinfraktion (sv)
C&L Inventory
tjærebaser, kull, anilinfraksjon (no)
C&L Inventory
tjærebaser, stenkuls-, anilinfraktion (da)
C&L Inventory
Tõrva alused, kivisüsi, aniliini fraktsioon (et)
C&L Inventory
uhoľno-dechtové zásady, anilínová frakcia (sk)
C&L Inventory
Βάσεις απόσταξης (el)
C&L Inventory
Ββάσεις πίσσας, άνθρακα, κλάσμα ανιλίνης (el)
C&L Inventory
Дестилатни основи (bg)
C&L Inventory
Катранени основи, каменни въглища, анилинова фракция (bg)
C&L Inventory
Other identifiers
648-034-00-0
C&L Inventory
Index Number
92062-27-6
EC Inventory, C&L Inventory, Pre-Registration process, Other
CAS number

Categories Display


Route: .live2