EU-IN_VITRO_MEDICAL_DEVICE_REG-ART_5_2_ANX_1

In Vitro Diagnostic Medical Devices Regulation - Hazardous Substances

EU. Hazardous Substances for Purposes of Art. 5(2) and Annex I of Regulation (EU) 2017/746 on In Vitro Diagnostic Medical Devices, 5 May 2017, as corrected 27 December 2019

This list contains a non-exhaustive inventory of hazardous substances for purposes of Regulation (EU) 2017/746, including Chap. 2 (Placing on the market and putting into service) and Annex I (General Safety and Performance Requirements). It is derived from: Table 3 of Annex VI to CLP, REACH Candidate List of SVHCs, and Directive 2000/54/EC's Annex III (Biological Agents list).

Hydrocarbons, C16-20, solvent-dewaxed hydrocracked paraffinic distn. residue; Cracked gasoil [A complex combination of hydrocarbons obtained by solvent dewaxing of a distillation residue from a hydrocracked paraffinic distillate. It consists predominantly of hydrocarbons having carbon numbers predominantly in the range of C16 through C20 and boiling in the range of approximately 360 °C to 500 °C (680 °F to 932 °F). It produces a finished oil having a viscosity of 4,5 cSt at approximately 100 °C (212 °F).]

A complex combination of hydrocarbons obtained by solvent dewaxing of a distillation residue from a hydrocracked paraffinic distillate. It consists predominantly of hydrocarbons having carbon numbers predominantly in the range of C16 through C20 and boiling in the range of approximately 360°C to 500°C (680°F to 932°F). It produces a finished oil having a viscosity of 4.5cSt at approximately 100°C (212°F). EC / List no: 307-662-2 CAS no: 97675-88-2
EU CLP (1272/2008)
Carc. 2