EU-IN_VITRO_MEDICAL_DEVICE_REG-ART_5_2_ANX_1

In Vitro Diagnostic Medical Devices Regulation - Hazardous Substances

EU. Hazardous Substances for Purposes of Art. 5(2) and Annex I of Regulation (EU) 2017/746 on In Vitro Diagnostic Medical Devices, 5 May 2017, as corrected 27 December 2019

This list contains a non-exhaustive inventory of hazardous substances for purposes of Regulation (EU) 2017/746, including Chap. 2 (Placing on the market and putting into service) and Annex I (General Safety and Performance Requirements). It is derived from: Table 3 of Annex VI to CLP, REACH Candidate List of SVHCs, and Directive 2000/54/EC's Annex III (Biological Agents list).

RELEVANT LEGISLATION
Back to the List

Extracts (petroleum), catalytic reformed light naphtha solvent; Low boiling point naphtha -unspecified [A complex combination of hydrocarbons obtained as the extract from the solvent extraction of a catalytically reformed petroleum cut. It consists predominantly of aromatic hydrocarbons having carbon numbers predominantly in the range of C7 through C8 and boiling in the range of approximately 100 °C to 200 °C (212°F to 392°F).]

A complex combination of hydrocarbons obtained as the extract from the solvent extraction of a catalytically reformed petroleum cut. It consists predominantly of aromatic hydrocarbons having carbon numbers predominantly in the range of C7 through C8 and boiling in the range of approximately 100°C to 200°C (212°F to 392°F). EC / List no: 295-331-2 CAS no: 91995-68-5
EU CLP (1272/2008)
Carc. 1B; Muta. 1B; Asp. Tox. 1