- ECHA
- Search for chemicals
- Adopted opinions and previous consultations on applications for authorisation
Adopted opinions and previous consultations on applications for authorisation
Adopted opinions and previous consultations on applications for authorisation
Adopted opinions and previous consultations on applications for authorisation
This page provides further information on the applications for authorisation or review reports, which have undergone consultation. The applications for authorisation are in the opinion development phase until the final opinions of the Committees for Risk Assessment and Socio-economic Analysis have been adopted and sent to the European Commission. Its decision-making process can be followed through the comitology register, where further information is published about the REACH Committee's past and upcoming meetings.
On 1 February 2020, the United Kingdom (UK) withdrew from the EU. The transition period provided by the withdrawal agreement ended on 31 December 2020. As of 1 January 2021, an application for an authorisation submitted by a person established in the UK (except Northern Ireland) is no longer valid in the EU, unless that application has been transferred to a legal entity established in the EU or Northern Ireland before the end of the transition period. Therefore, authorisation applications and decisions in so far as these concern persons established in the UK (except Northern Ireland) are no longer considered valid.
Related links
0243-01 | Review report | Trichloroethylene | 201-167-4 | 79-01-6 | DOMO Caproleuna GmbH | Industrial use as an extraction solvent for the purification of caprolactam from caprolactam oil | Commission decided | Details |
0244-01 | Initial | Chromium trioxide | 215-607-8 | 1333-82-0 | CROMAPLAST S.p.A. | Industrial use of CrO3 in the pre-treatment (etch) in the chrome plating process of automotive plastic components | Commission decided | Details |
0244-02 | Initial | Chromium trioxide | 215-607-8 | 1333-82-0 | CROMAPLAST S.p.A. | Industrial use of CrO3 in the chrome plating of automotive plastic components | Commission decided | Details |
0245-01 | Initial | Chromium trioxide | 215-607-8 | 1333-82-0 | NEWFORM S.P.A. | Electroplating of different types of substrates using Chromium Trioxide to achieve functional surfaces with high durability and a bright or matt silvery appearance for sanitary applications | Commission decided | Details |
0246-01 | Initial | 2,2'-dichloro-4,4'-methylenedianiline (MOCA) | 202-918-9 | 101-14-4 | Courbis Synthèse Annovi S.r.l.; Dansk Elastomer A/S; Durlast S.r.l.; Pieffe S.r.l.; Policart S.r.l.; R.B.M. Italia S.r.l.; Tecnocaucho S.A.; Tegea S.r.l.; Optibelt Urethane Belting Ltd.; Productos Salinas S.A.; V.M. SPA | Industrial use of 2,2'-Dichloro-4,4'-methylenedianiline (MOCA) in the manufacture of hot cast polyurethane products | Commission decided | Details |
0247-01 | Initial | 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated | - | - | Boehringer Ingelheim RCV GmbH & Co KG | Use of 4-(1,1,3,3-tetramethylbutyl)phenol, ethoxylated as a detergent in the purification of lipidated OspA protein subsequently used for manufacturing of Lyme disease vaccine candidate. | Commission decided | Details |
0248-01 | Initial | 4-Nonylphenol, branched and linear, ethoxylated | - | - | FYSOL SAS [name of applicant in the original application: OCV Chambéry France S.A.S. updated due to a notified legal entity change] | Mixing by the Applicant of a NPnEO-containing epoxy resin, resulting in mixtures containing < 0.1% w/w of NPnEO for the manufacture of glass fiber articles for critical composite helicopter parts, that is exempt from authorisation under REACH Art. 56(6)(a) | Commission decided | Details |
0249-01 | Initial | Chromium trioxide | 215-607-8 | 1333-82-0 | Monroe Czechia s.r.o. | The use of Chromium Trioxide (EC 215-607-8) by Monroe Czechia s.r.o. in the functional chrome plating of shock absorber rods. | Commission decided | Details |
0250-01 | Initial | Chromium trioxide | 215-607-8 | 1333-82-0 | Tenneco Automotive Ibérica | The use of Chromium Trioxide (EC 215-607-8) by Tenneco Automotive Ibérica S.A in the functional chrome plating of shock absorber rods. | Commission decided | Details |
0251-01 | Initial | Chromium trioxide | 215-607-8 | 1333-82-0 | Tenneco Automotive Europe BVBA | The use of Chromium Trioxide (EC 215-607-8) by Tenneco Automotive Europe BVBA in the functional chrome plating of shock absorber rods. | Commission decided | Details |
0252-01 | Initial | Chromium trioxide | 215-607-8 | 1333-82-0 | Tenneco Automotive Eastern Europe Sp. z o.o. | The use of Chromium Trioxide (EC 215-607-8) by Tenneco Automotive Eastern Europe Sp. z o.o. in the functional chrome plating of shock absorber rods. | Commission decided | Details |
0253-01 | Initial | Chromium trioxide | 215-607-8 | 1333-82-0 | GEA Westfalia Separator Group GmbH | Chromium trioxide-based functional chrome plating of machine components for centrifugal separator and decanter centrifuges | Commission decided | Details |
0254-01 | Initial | Chromium trioxide | 215-607-8 | 1333-82-0 | RATIER-FIGEAC | Industrial use of chromium trioxide for functional chrome plating of aircraft safety critical steel ball screws used in airplane's actuators, to decrease friction ratio, and enhance wear, corrosion, and endurance resistance, enabling targeted service life | Opinions adopted | Details |
0254-02 | Initial | Chromium trioxide | 215-607-8 | 1333-82-0 | RATIER-FIGEAC | Industrial use of chromium trioxide for the chromic acid anodizing of aluminium spars as critical surface preparation phase for bonding with aircraft safety critical propeller blades to secure reliable bonding performance and enhance spars corrosion resistance | Opinions adopted | Details |
0255-01 | Initial | Chromium trioxide | 215-607-8 | 1333-82-0 | Chrom - Mueller Metallveredelung GmbH | Industrial use of chromium trioxide for high ratio aspects inside hard chromium coating of firearms barrel bores subject to thermal, mechanical and chemical stresses, in order to provide wear resistance properties, as well as low friction coefficient, hardness, resistance to corrosion and gas erosion properties. | Commission decided | Details |
0255-02 | Initial | Chromium trioxide | 215-607-8 | 1333-82-0 | Chrom - Mueller Metallveredelung GmbH | Industrial use of chromium trioxide in the hard chromium coating of complex outer surfaces of firearm auxiliary parts subject to mechanical, chemical and thermal stress in order to provide optimized sliding properties as well as heat, corrosion and wear resistance properties. | Commission decided | Details |
0255-03 | Initial | Chromium trioxide | 215-607-8 | 1333-82-0 | Chrom - Mueller Metallveredelung GmbH | Industrial use of chromium trioxide in the hard chromium coating of complex outer and inner surfaces of firearms auxiliary parts requiring a customised and selective coating technique and subject to thermal, mechanical and chemical stresses, in order to provide wear resistance and barrier properties, as well as post-processing capability and resistance to hot combustion gas erosion. | Commission decided | Details |
0256-01 | Initial | Chromium trioxide | 215-607-8 | 1333-82-0 | KaVo Dental GmbH | Chromium trioxide based functional chrome plating of dental instruments applied by professionals for dental treatment | Commission decided | Details |
0257-01 | Initial | Chromium trioxide | 215-607-8 | 1333-82-0 | QUALIPAC Aurillac; Etablissements R.GRAINDORGE | Industrial use of chromium trioxide for the etching of polypropylene (PP) substrates, as a pre-treatment step of the electroplating process, for the luxury sector and other applications | Opinions adopted | Details |
0258-01 | Initial | Chromium trioxide | 215-607-8 | 1333-82-0 | Heinrich Schulte Söhne GmbH & Co. KG; Schulte Hartchrom GmbH | Chromium trioxide-based functional chrome plating of large components and small components with complex geometries and/or requiring special approval procedures for their application in demanding sectors such as medical, aerospace, defence and mining industry | Opinions adopted | Details |
0258-02 | Initial | Chromium trioxide | 215-607-8 | 1333-82-0 | Heinrich Schulte Söhne GmbH & Co. KG; Schulte Hartchrom GmbH | Chromium trioxide-based functional chrome plating of small components with simple geometries not requiring special approval procedures for their application in demanding sectors such as hydraulic systems, food, paper and chemical industry | Opinions adopted | Details |
0259-01 | Initial | Chromium trioxide | 215-607-8 | 1333-82-0 | MT METAL TECH S.r.l. [application transferred from “ST SRL” due to a notified legal entity change] | Use for electroplating of different types of substrates with the purpose to create a long-lasting high durability surface with bright (shiny) or matte look (functional electroplating with decorative character) | Opinions adopted | Details |
0260-01 | Initial | Chromium trioxide | 215-607-8 | 1333-82-0 | Sarrel Sarreliber - Transformação de Plásticos e Metais, S.A | Industrial use of chromium trioxide for the etching of plastics materials, as a pre-treatment step of the electroplating process, for automotive applications mostly | Opinions adopted | Details |
0261-01 | Initial | Chromium trioxide | 215-607-8 | 1333-82-0 | Metalbrass s.r.l. | Electroplating of metal substrates using chromium trioxide to achieve functional surfaces for the sanitary sector | Commission decided | Details |
0262-01 | Initial | Chromium trioxide | 215-607-8 | 1333-82-0 | Cromoplastica C.M.C. S.r.l. | Use of chromium trioxide for etching of plastic substrates as a key pre-treatment step for creating an electrically conductive surface to enable electroplating | Opinions adopted | Details |