Registration Dossier

Administrative data

Link to relevant study record(s)

Reference
Endpoint:
flammable solids
Type of information:
experimental study
Adequacy of study:
key study
Study period:
19 November 2010
Reliability:
1 (reliable without restriction)
Rationale for reliability incl. deficiencies:
guideline study
Remarks:
Guideline compliant study with good documentation of the applied methods.
Qualifier:
according to
Guideline:
EU Method A.10 (Flammability (Solids))
Deviations:
no
GLP compliance:
no
Key result
Test procedure:
burning time (test type not further specified)
Remarks:
or specified in description of method (migrated information)
Burning time:
1 520 s
Key result
Test procedure:
ignition time on contact with air
Remarks:
Ignition on contact with air refers to either Pyrophoric solids or Pyrophoric liquids depending on physical state (migrated information).
Remarks on result:
no ignition on contact with air (not further specified)
Remarks:
corresponding to 'no' in migrated source record.
Key result
Test procedure:
ignition time on contact with air
Remarks:
Ignition on contact with air refers to either Pyrophoric solids or Pyrophoric liquids depending on physical state (migrated information).
Remarks on result:
no ignition on contact with air (not further specified)
Remarks:
corresponding to 'no' in migrated source record.

Propagation time for combustion over 200 mm: 1520 s

Result: positive; no further testing required

Tin disulfide is not highly flammable.

Interpretation of results:
non flammable
Remarks:
Migrated information
Conclusions:
Tin disulfide is not highly flammable.
Executive summary:

The flammability of tin disulfide was determined according to EC A.10 “Determination of the Flammability (Solids)". The combustion speed was 1520 s for 200 mm. Therefore, the test was stopped after the pre-test and tin disulfide is considered to be not highly flammable.

The results of this test are considered to be relevant and reliable for the risk assessment.

Description of key information

Tin disulfide is not highly flammable.

Key value for chemical safety assessment

Flammability:
non flammable

Additional information

In the Klimisch 1 key study from Paß (2011) the flammability of tin disulfide was determined according to EC A.10 “Determination of the Flammability (Solids)". The combustion speed was 1520 s for 200 mm. Therefore, tin disulfide is considered to be not highly flammable.

The results of this test are considered to be relevant and reliable for the risk assessment.

Justification for classification or non-classification

Tin disulfide is not highly flammable. Therefore, classification is not needed.