Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 203-929-1
CAS number: 112-03-8
- Description of first aid measures
Remove soiled or soaked clothing immediately
When inhaled remove to fresh air and seek medical aid.
After contact with skin
In case of contact with skin wash off immediately with soap and water
Summon a doctor immediately.
After contact with eyes
When swallowed seek medical aid immediately and show the physician the packaging or the
label of the packaging.
Do not induce vomiting.
- Most important symptoms and effects, both acute and delayed
No symptoms known currently.
No hazards known at this time.
- Indication of any immediate medical attention and special treatment needed
Suitable extinguishing media
water spray jet
Extinguishing media that must not be used for safety reasons
strong water jet
- Special hazards arising from the substance or mixture
In case of fires, hazardous combustion gases are formed: Carbon monoxide (CO)
Nitrous gases (NOx)
Hydrogen chloride (HCl)
- Advice for firefighters
Special protective equipment for firefighting
Use self-contained breathing apparatus
- Personal precautions, protective equipment and emergency procedures
Wear suitable personal protective equipment.
Ensure adequate ventilation.
Keep away sources of ignition.
- Environmental precautions
Do not allow to enter drains or waterways
- Methods and material for containment and cleaning up
Pick up mechanically. Rinse away rest with warm water.
- Precautions for safe handling
Advice on safe handling
Use only in well ventilated areas.
Open and handle container with care.
Wash hands before breaks and after work.
Use barrier skin cream.
Remove soiled or soaked clothing immediately and clean thoroughly before using again.
Advice on protection against fire and explosion
Traces of flammable substances can collect in the vapour space of closed systems, therefore
keep sources of ignition away.
Take precautionary measures against build-up of electrostatic charges, e.g earthing during
loading and off-loading operations.
Keep away from sources of ignition - refrain from smoking.
- Conditions for safe storage, including any incompatibilities
Advice on storage compatibility
Do not store with alkalies
Further information on storage conditions
Product is hygroscopic.
- Specific end use(s)
No further recommendations.
- Control parameters
Exposure limit values
Exposure limit values are not available.
- Exposure controls
General protective measures
Do not inhale vapours
Avoid contact with skin
Avoid contact with eyes
Respiratory protection : Use respiratory protection in case of insufficient exhaust
ventilation or prolonged exposure
Full mask to standard DIN EN 136
Filter A (organic gases and vapours) to standard DIN EN 141
The use of filter apparatus presupposes that the environment atmosphere contains at least 17% oxygen by volume, and does not exceed the maximum gas concentration, usually 0.5% by volume. Relevant guidelines to be considered include EN 136/141/143/371/372 as well as other national
Hand protection : For long-term exposure:
Butyl rubber gloves.
Minimum thickness (glove): not determined
With solid dry substances permeation is not to be expected, therefore the breakthrough-time for this protective glove has not been measured.
For short-term exposure (splash protection):
Nitrile rubber gloves.
These types of protective gloves are offered by various manufacturers. Please note the manufacturers´ detailed statements, especially about the minimum thickness and the minimum breakthrough time. Consider also the particular working conditions under which the gloves are being used.
Eye protection : Depending on the risk, wear sufficient eye protection (safety glasses with side protection or goggles, and if necessary, face
Body protection : Depending on the degree of hazard, when handling corrosive substances, aprons, boots or full protective clothing made of
suitable materials (e.g. rubberized or PVC-coated) must also be worn.
See section 10.3. "Possibility of hazardous reactions"
-. Chemical stability
Under normal conditions the product is stable.
- Possibility of hazardous reactions
Reactions with alkalies.
Uncleaned empty vessels may contain product gases which can form explosive mixtures with air.
- Conditions to avoid
Keep away from heat, sparks, open flames, and other sources of ignition.
- Incompatible materials
- Hazardous decomposition products
Nitrous oxides (NOx)
- Waste treatment methods
In accordance with local authority regulations, take to special waste incineration plant
Packaging that cannot be cleaned should be disposed of as product waste
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
Deze website maakt gebruik van cookies om het surfen zo aangenaam mogelijk te maken.
Welcome to the ECHA website. This site is not fully supported in Internet Explorer 7 (and earlier versions). Please upgrade your Internet Explorer to a newer version.
Do not show this message again