Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 206-581-9
CAS number: 355-37-3
Most important symptoms and effects, both acute and delayed: Repeated exposure may produce adverse effects on the liver.
Indication of any immediate medical attention and special treatment needed: Get medical advice/attention if you feel unwell.
Description of first aid measures
Inhalation: Remove patient from exposure, keep warm and at rest. Oxygen may be beneficial if breathing is laboured. Obtain medical attention.
Skin Contact: Remove contaminated clothing immediately and wash affected skin with plenty of water or soap and water. If symptoms persist, obtain medical attention. Contaminated clothing should be thoroughly cleaned before reuse.
Eye Contact: Immediately irrigate with eyewash solution or clean water, holding the eyelids apart, for at least 15 minutes. Obtain medical attention.
Ingestion: Do not induce vomiting. Provided the patient is conscious, wash out mouth with water and give 200-300 ml (half a pint) of water to drink. Obtain medical attention.
Further Medical Treatment: Symptomatic treatment and supportive therapy as indicated.
Special hazards arising from the substance or mixture: Thermal decomposition will evolve very toxic and corrosive vapours. (hydrogen fluoride and possibly carbonyl fluoride)
Extinguishing media: As appropriate for surrounding fire. Keep fire exposed containers cool by spraying with water.
Advice for fire-fighters: A self-contained breathing apparatus and full protective clothing must be worn in fire conditions. Wear neoprene gloves when handling refuse from a fire involving this product, to protect against possible contamination with hydrofluoric acid.
Personal precautions, protective equipment and emergency procedures: Ensure suitable personal protection during the removal of spillages, for example: goggles, respiratory protection against organic vapours, rubber boots, gloves and apron. Ventilate area.
Environmental precautions: Do not allow spillages to enter drains, sewers, or watercourses.
Methods and material for containment and cleaning up: Adsorb spillages onto sand, earth or any suitable adsorbent material. Transfer to a container for disposal. Wash the spillage area with water. Washings must be prevented from entering surface water drains.
Precautions for safe handling: Avoid contact with skin and eyes. Atmospheric concentrations should be minimised and kept as low as reasonably practicable below the occupational exposure limit. Provide adequate ventilation, including appropriate local extraction, if fumes or vapours are likely to be evolved. Avoid contact with naked flames and hot surfaces as corrosive and very toxic decomposition products can be formed.
Conditions for safe storage, including any incompatibilities: Keep container tightly closed and dry. Keep in a cool, well ventilated place.
Specific use: Solvent
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
Welcome to the ECHA website. This site is not fully supported in Internet Explorer 7 (and earlier versions). Please upgrade your Internet Explorer to a newer version.
Do not show this message again