Registration Dossier

Administrative data

First-aid measures

General advice:
Recommendations must be interpreted considering the available specific information regarding the patient and in conjunction with other sources
of authority.
If inhaled:
After inhalation of dust. Fresh air. If difficulties occur: Seek medical attention. After inhalation of decomposition products: Immediately inhale
corticosteroid dose aerosol.
Keep patient calm, remove to fresh air, seek medical attention.
On skin contact:
Wash thoroughly with soap and water.
On contact with eyes:
Wash affected eyes for at least 15 minutes under running water with eyelids held open.
Seek medical attention.
On ingestion:
Rinse mouth immediately and then drink plenty of water,
seek medical attention.
Note to physician:
Hazards: After inhalation of decomposition products: Risk of pulmonary edema.
Symptoms can appear later.
Treatment: Treat according to symptoms (decontamination, vital functions), no known specific antidote.
After inhalation of decomposition products: Pulmonary odema prophylaxis.

Fire-fighting measures

Suitable extinguishing media:
water, foam, dry extinguishing media, water spray
Specific hazards:
At temperatures of 100 °C can be emitted:
isobutyraldehyde, carbon dioxide, nitrogen monoxide, nitrogen dioxide, dinitrogen oxide
Special protective equipment:
Wear a self-contained breathing apparatus.
Further information:
Dispose of fire debris and contaminated extinguishing water in accordance with official regulations.

Accidental release measures

Environmental precautions:
Do not discharge into drains/surface waters/groundwater. Retain and dispose of contaminated wash water.
Methods for cleaning up or taking up:
For large amounts: Sweep/shovel up.
For residues: Sweep/shovel up.

Handling and storage

Handling
Protection against fire and explosion:
Keep away from sources of ignition - No smoking. Avoid influence of heat.
Storage
When stored loose do not mix with other fertilizers. Store well away from other substances.
Suitable materials for containers:
High density polyethylene (HDPE), Low density polyethylene (LDPE)
Further information on storage conditions: Protect from direct sunlight. Protect against heat. Protect against moisture. Protect against contamination. The substance/product may cake under the influence of moisture.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

Remarksopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Components with workplace control parameters
none
Personal protective equipment
Respiratory protection:
Breathing protection if breathable aerosols/dust are formed. (Particle filter EN 143 P1)
General safety and hygiene measures:
At the end of the shift the skin should be cleaned and skin-care agents applied.

Stability and reactivity

Thermal decomposition: approx. 100 °C
To avoid thermal decomposition, do not overheat. Thermal
decomposition above the indicated temperature is possible.
Hazardous reactions:
Accumulation of fine dust may entail the risk of a dust explosion in the presence of air.
Hazardous decomposition products:
isobutyraldehyde, carbon dioxide, nitrogen mono

Disposal considerations

Test for use in agriculture.
Contact manufacturer.
Contaminated packaging:
Contaminated packaging should be emptied as far as possible; then it can be passed on for recycling
after being thoroughly cleaned.