Registration Dossier
Registration Dossier
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 800-696-3 | CAS number: 78605-96-6
Guidance on Safe Use
Administrative data
First-aid measures
EYE CONTACT Rinse continuously with water for at least 10 minutes.
SKIN CONTACT Shower immediately and remove contaminated clothing.
INHALATION Fresh air and rest.
INGESTION Rinse mouth with water and give small amounts of water to drink. NEVER GIVE AN UNCONSCIOUS PATIENT WATER TO DRINK. DO NOT INDUCE VOMITING. SEEK IMMEDIATE MEDICAL ATTENTION.
OTHER For all exposures to undiluted material seek medical advice. Show medical staff substance data sheet or ensure information accompanies patient.
Fire-fighting measures
EXTINGUISHING MEDIA CO2, Powder, Alcohol-resistant foam, Water fog/spray.
SPECIAL FIRE FIGHTING PROCEDURES Wear self contained breathing apparatus
UNUSUAL FIRE & EXPOSURE HAZARDS If split material is mopped up with a rag, the high surface area of the material can allow autoignition at room temperature
Accidental release measures
Recover materials if possible. Also absorb spilled substance in sand or inert substance and remove to a safe place. Prevent material entering drains with absorbent socks and drain protectors. After absorption and recovery, wash away traces with large amounts of water. Any absorbent material used to mop up a spill must be thoroughly wetted and disposed of in a closed metal container.
Protective Equipment to be worn for spill – Chemical splash resistant overalls, Wellingtons or boots, chemical resistant PVC gauntlets and organic vapour respirator.
Handling and storage
HANDLING
Use in well ventilated areas. Keep containers tightly closed when not in use. Open and handle containers with care. Store in original containers. Keep away from sources of ignition. Avoid excessive breathing of vapours. Emergency shower and eyewash should be close by. Transfer and handle under inert and dry atmosphere. Avoid accumulation of static charge and keep away from sources of ignition. Electrical equipment to be suitable for electrical apparatus group and temperature class of the material .
STORAGE
Store away from oxidising agents. Suitable storage material – 316 Stainless Steel. Suitable seals - Perfluoroelastomer (Kalrez), suitable gaskets – graphite supported on 316 Stainless steel or asbestos free aramid fibre composite. Storage tanks to have flame trap and to be bunded to contain 110% of tank contents, or as local regulations.
Transport information
Land transport (UN RTDG/ADR/RID)
- UN number:
- 3082
Shippingopen allclose all
Special provisions / remarks
- Special provisions:
- 274,335,601
- Remarks:
- ADR Hazard ID: 90. Environmental Hazardous Mark
Inland waterway transport (UN RTDG/ADN(R))
- UN number:
- 3082
Shippingopen allclose all
Special provisions / remarks
- Remarks:
- Also Environmental Hazardous Mark
Marine transport (UN RTDG/IMDG)
- UN number:
- 3082
Shipping information
- Proper shipping name and description:
- Environmentally hazardous substance, liquid, n.o.s.(Amyl Cinnamic Aldehyde)
- Chemical name:
- Amyl Cinnamic Aldehyde
- Labels:
- 9
Remarksopen allclose all
Air transport (UN RTDG/ICAO/IATA)
- UN number:
- 3082
Shipping information
- Proper shipping name and description:
- Environmentally hazardous substance, liquid, n.o.s.(Amyl Cinnamic Aldehyde)
- Chemical name:
- Amyl Cinnamic Aldehyde
- Labels:
- 9
Special provisions / remarks
- Remarks:
- Also Environmental Hazardous Mark
SpecialProvisionsopen allclose all
Exposure controls / personal protection
VENTILATION Engineering controls should be aimed to prevent the need for ventilation, however if this is not possible and the undiluted product is used in a confined space, then good ventilation must be employed.
PROTECTIVE EQUIPMENT for normal operation of undiluted product
BREATHING Under normal conditions respiratory protection is not required. If the exposure limit is likely to be exceeded, wear full face chemical respirator with organic vapour cartridge CEN141.
PROTECTIVE GLOVES Use protective gloves/gauntlets made of PVC.
EYE PROTECTION Wear close fitting goggles or visor when handling, e.g. sampling.
OTHER PROTECTION Wear normal industrial workwear to prevent skin contact.
Stability and reactivity
STABILITY TO HEAT Stable above 0°C and at least up to 160°C in the absence of air.
REACTIVITY Reacts with oxidising agents. Upon exposure to air, slowly oxidises to the acid.
REACTION WITH WATER None
POLYMERISATION HAZARD None
Disposal considerations
Waste Product Recycle if possible, but if not, then incineration is recommended since the material is odiferous.
Packaging Steel drums can be cleaned and re-used if in good condition, or recycle as scrap metal. Plastic IBC bodies will pick up odour, so re -use will not be possible. Either clean out, shred and landfill, if permitted or clean, granulate and recycle the plastic granules.
NOTE
Incineration must be carried out in a suitable high temperature incinerator operated by a registered disposal company. User must ensure that this complies with all local /National laws.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
