Registration Dossier

Administrative data

First-aid measures

If inhaled : Remove to fresh air. Obtain medical attention.
In case of skin contact : Wash off with soap and water. Wash off immediately with plenty of water for at least 15 minutes. Get medical attention if irritation develops and persists.
In case of eye contact : Hold eyelids apart and flush eyes with plenty of water for at least 15 minutes. Get medical attention.
If swallowed : If conscious, make the victim drink the following: Drink 1 or 2 glasses of water. Get medical attention immediately.
Most important symptoms and effects, both acute and delayed
Symptoms : sensitising effects
Indication of any immediate medical attention and special treatment needed
Treatment : For specialist advice physicians should contact the Poisons Information Service.

Fire-fighting measures

1. Extinguishing media
Suitable extinguishing media : Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.
2. Special hazards arising from the substance or mixture
Specific hazards during firefighting: Burning produces irritant fumes. Exposure to decomposition products may be a hazard to health.
3.Advice for firefighters
Special protective equipment for firefighters : In the event of fire, wear self-contained breathing apparatus.Use personal protective equipment.
Further information : The product itself does not burn.

Accidental release measures

1. Personal precautions, protective equipment and emergency procedures
Personal precautions : Use personal protective equipment.
2. Environmental precautions
Environmental precautions : Should not be released into the environment.
3.Methods and materials for containment and cleaning up
Methods for cleaning up : Sweep up and shovel into suitable containers for disposal. Pick up and transfer to properly labelled containers. Clean contaminated surface thoroughly. Flush with water. Do not flush into surface water or sanitary sewer system.To clean the floor and all objects contaminated by thismaterial, use plenty of water.

Handling and storage

1. Precautions for safe handling
Advice on safe handling : Handle in accordance with good industrial hygiene and safety practice. Avoid creating dust. Avoid breathing dust. Avoid contact with skin, eyes and clothing.
2. Conditions for safe storage, including any incompatibilities
Requirements for storage areas and containers : Keep tightly closed in a dry, cool and well-ventilated place. Protect from moisture. Protect from contamination.
Other data : Stable under recommended storage conditions.
3. Specific end uses
Specific use(s) : Raw material for industry

Transport information

Land transport (ADR/RID)

UN number:
Not dangerous goods
Shippingopen allclose all
Class:
Not dangerous goods
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

Remarksopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Engineering measures
Ensure that eyewash stations and safety showers are close to the workstation location.Effective exhaust ventilation system
Personal protective equipment
Respiratory protection : Breathing apparatus only if aerosol or dust is formed. In the case of dust or aerosol formation use respirator with an approved filter. Respirator with a dust filter
Hand protection : Neoprene gloves
Eye protection : Tightly fitting safety goggles Safety glasses with side-shields
Skin and body protection : impervious clothing
Environmental exposure controls
General advice : Should not be released into the environment.

Stability and reactivity

1. Reactivity
No dangerous reaction known under conditions of normal use.
2.Chemical stability
No decomposition if stored and applied as directed.
3. Possibility of hazardous reactions
Hazardous reactions : Hazardous polymerisation does not occur.
4. Conditions to avoid
Conditions to avoid : None known.
5. Incompatible materials
Materials to avoid : Strong bases, Humid air
6. Hazardous decomposition products
Hazardous decomposition products : Hydrogen bromide Bromine, Carbon monoxide, carbon dioxide and unburned hydrocarbons (smoke).

Disposal considerations

Waste treatment methods
Product : Dispose of as hazardous waste in compliance with local and national regulations.
Dispose of wastes in an approved waste disposal facility.