Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 605-399-0
CAS number: 165252-70-0
Rinse mouth with water. Get medical attention immediately. Induce vomiting as directed by medical personnel. Never give anything by mouth to an unconscious or convulsing person.
If you feel unwell, move to fresh air immediately. Get medical attention if cough or other symptoms develop. If not breathing, give artificial respiration. If breathing is difficult, give oxygen.
Immediately remove contaminated clothing and shoes. Flush skin and clean off with large amounts of water. Get medical attention if symptoms develop.
Immediately flush with plenty of water. Part eyelids with fingers to assure complete flushing. Check for and remove contact lenses if easily possible. Get medical attention if irritation persists.
Suitable Extinguishing Media Foam, water.
Unsuitable Extinguishing Media
CO2 or dry chemical are not effective for extinguish.
SPECIAL HAZARDS ARISING FROM THE SUBSTANCE
Emits toxic fumes in fire condition.
This product is not expected to burn or explode in normal conditions, but will burn violently if involved in fire. Dinotefuran is self-reactive under high temperatures. Exposure to heat may promote violent decomposition.
Hazardous Combustion Products
ADVICE FOR FIREFIGHTERS
Keep unnecessary and unprotected personnel away. Shut off supply if possible. Remove containers to safe place if possible.
Keep containers and surroundings cool by spraying with water. Fight fire from an upwind position.
Respiratory and eye protection is required for firefighting personnel.
Full protective equipment and self-contained breathing apparatus (SCBA) should be used for all indoor fires and any significant outdoor fires
PERSONAL PRECAUTIONS, PROTECTIVE EQUIPMENT AND EMERGENCY PROCEDURES
Warn and evacuate in the neighborhood as necessary. Keep unnecessary and unprotected personnel away. Wear appropriate personal protective equipment as specified in Section 8. Remove all sources of ignition. Stop leak if possible without personal risk.
Do not let this product enter the environment.
METHODS AND MATERIAL FOR CONTAINMENT AND CLEANING UP
Use non-sparking tools and equipment.
Scoop or sweep up the spilled product and place it in a disposal container. Use appropriate tools. Avoid dispersal of dust in the air.
PRECAUTIONS FOR SAFE HANDLING
Use only with adequate ventilation.
Where there may be potential of fire or explosion hazard, use explosion-proof electrical equipment and take precautions against build-up of electrostatic charges.
Wear appropriate personal protective equipment. Keep away from heat, sparks, open flames and hot surfaces.
Handle with care. Do not breathe dust. Avoid contact with eyes, skin and clothing. Take precautionary measures against static discharge.
Advice on general occupational hygiene
Provide hand and eye wash station near work area. Wash hands thoroughly after use. Take off contaminated protective equipment before entering rest areas. Do not eat, drink or smoke when using this product.
CONDITIONS FOR SAFE STORAGE, INCLUDING ANY INCOMPATIBILITIES
Keep away from heat, flame, all sources of ignition，and combustible material. Store in a cool, dark and well ventilated area. Keep container tightly closed and sealed until ready for use.
Do not contaminate other pesticides, fertilizers, water, foodstuffs or feed by storage and disposal.
Metal drum or conductive container.
Appropriate Engineering Controls:
Provide general ventilation. Using closed system or local exhaust ventilation is recommended. Provide safety shower and eye wash station near work area.
Eye/face protection: Safety glasses, goggles. Skin Protection:
Hand protection: Chemical resistant gloves.
Body Protection: Safety helmet, protective clothing, safety boots.
Respiratory protection: Dust respirator
STABILITY AND REACTIVITY
Reactivity :Risk of dust explosion.
Chemical stability: Stable under normal conditions.
Possibility of hazardous reactions: Dinotefuran is self-reactive under high temperatures. Exposure to heat may promote violent decomposition.
Conditions to avoid:Exposure to heat, ignition sources.
Incompatible materials: Strong oxidizing agents
Hazardous decompostion products: Nitrogen oxides
WASTE TREATMENT METHODS
Waste from Residues:
Waste must be disposed of in accordance with federal, state, local, national and international regulations.
Empty the container completely before disposal.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
Esta web utiliza cookies para mejorar su experiencia de navegación en nuestros sitios web.
Welcome to the ECHA website. This site is not fully supported in Internet Explorer 7 (and earlier versions). Please upgrade your Internet Explorer to a newer version.
Do not show this message again