Registration Dossier
Registration Dossier
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 235-227-6 | CAS number: 12136-45-7
Endpoint summary
Administrative data
Description of key information
Additional information
Physical and chemical properties
Dipotassium oxide/Potassium oxide
1.Appearance
Potassium oxide is yellowish white to grey hygroscopic crystalline powder.
2.Melting point
Using the EPI Suite Mpbwin (v.1.43) QSAR model, a Melting Point of 302.03 deg C (Mean Value) was established.
3.Boiling point
Using the EPI Suite Mpbwin (v.1.43) QSAR model, a Boiling Point of 691.46 deg C (estimated) was established.
4.Specific gravity
2.32
5.Vapour pressure
A QSAR method predicts the vapour pressure of this substance to be 3.03E-014 Pa at 25C.
6.Water solubility
1000000 mg/l(calculated)
Substance is predicted by QSAR method to be very soluble ( 1000000 mg/l) with water
Substance is predicted by QSAR method (EPI Suite v 4.1/WSKOW v1.42 ) to be very soluble ( 1e+006 mg/l) in water.
7.Partition co-efficient
A reliable QSAR method predicts a value for the partition co-efficient (logKow) of -5.08 for this substance.
8.Hydrolysis as a function of pH
Hydrolysis is not expected to be an important environmental fate process since this compound lacks functional groups that hydrolyze under environmental conditions.
Hydrolysis is a chemical reaction during which molecules of water (H2O) are split into hydrogen cations (H+, conventionally referred to as protons) and hydroxide anions (OH−) in the process of a chemical mechanism).
Potassium oxide is a basic oxide and reacts with water violently to produce the caustic potassium hydroxide
When water is added to Potassium oxide, KOH is produced.
K2O+H2O→KOH
On this basis, Potassium oxide does not have a potential for Hydrolysis and Potassium ion will not hydrolise.
9.Adsorption/desorption
KOCWIN predicts a Koc value of 13.22 L/kg (log Koc 1.1211) .The adsorption coefficient (Koc) was estimated using the KOCWIN v2.00 QSAR model available from the US EPA. The estimated adsorption coefficient was 13.22 L/kg (log Koc 1.1211)
10.Dissociation constant
Potassium oxide Reacts violently with water.When water is added to Potassium oxide, Potassium hydroxide is produced.
K2O+H2O→KOH
Therefore testing for Dissociation constant does not need to be performed.
11.Flammability
From the compositional description and the structural formula given, it can be concluded that this substance CAS 12136-45-7 , (EINECS) 235-227-6 is not pyrophoric (will not ignite or emit flammable gases on contact with air, damp air, or water) nor does it exhibit the property of flammability (will not easily burn when ignited or contribute to the combustion of other materials). There are no functional groups or other structural alerts present that would support any concern that this substance should be classified as dangerous according to the criteria for evaluating flammability, which is furthermore confirmed by long term handling experience.
12. Flash point
Potassium oxide is inorganic substance and according“ ANNEX VII - STANDARD INFORMATION REQUIREMENTS FOR SUBSTANCES MANUFACTURED OR IMPORTED IN QUANTITIES OF ONE TONNE OR MORE” the study does not need to be conducted if the substance is inorganic.
13.Explosiveness
From the compositional description and the structural formula given, it can be concluded that this substance CAS 12136-45-7 , (EINECS) 235-227-6 does not exhibit explosive properties (will not detonate or deflagrate, under conditions of excessive heating with or without confinement, impact, or friction to produce heat and or gas). There are no functional groups or other structural alerts associated with explosive properties or tendencies that would indicate that this substance will manifest explosive properties. Similarly, the calculated Oxygen Balance is less than -200 suggesting that testing need not be conducted and that a negative result can be predicted. Thus, this substance should not be classified as dangerous according to the criteria for explosivity, which is furthermore confirmed by long term handling experience.
14.Viscosity
Dipotassium oxide/ Potassium oxide is solid which remains solid at temperatures significantly above room temperature.
OECD Test Guideline 114 on the viscosity of liquids indicates that the substance to be tested must be liquid at room temperature, and therefore a study of the viscosity of Dipotassium oxide/ Potassium oxide is not required.
15.Autoignition temperature
From the compositional description, the structural formula given, it can be concluded that it is not necessary to evaluate the ignition temperature of this substance by either the Self- or Auto-Ignition testing criteria indicated in the TGD. There are no functional groups or other structural alerts present that indicate that this substance would spontaneously ignite in air when exposed to a hot surface and thus should not be classified as dangerous with respect to this endpoint. This empirical evaluation is furthermore confirmed by long term handling experience. The study is therefore considered scientifically unjustified.
Therefore testing for Auto flammability does not need to be performed.
16.Oxidizing properties
From the compositional description and the structural formula given, it can be concluded that this substance CAS 12136-45-7, (EINECS) 235-227-6 does not exhibit oxidizing properties (will not cause or contribute to the combustion of other materials by virtue of its own inherent oxidation or reduction potential). There are no functional groups or other structural alerts present that would indicate that this substance would promote oxidation and thus should not be classified as dangerous according to the criteria for evaluating oxidizing properties. Furthermore, this is confirmed by long term handling experience.
Table Summary of physico-chemical properties
Property |
Value |
References |
Physical state |
Solid |
Lide 90nd Edition,2009 |
Substance type |
Inorganic |
Lide 90nd Edition,2009 |
Color |
Pale yellow |
Lide 90nd Edition,2009 |
Molecular Weight |
94.196g/mol |
US EPA, 2011 |
Melting point |
302.03°C (calculated) |
USEPA, 2011
|
Boiling point |
691.46°C (calculated) |
USEPA, 2011
|
Vapour pressure |
3.03E-014 Pa at 25C |
USEPA, 2011 |
Water solubility |
1000000 mg/l(mg/l (calculated) |
US EPA, 2011
|
Partition coefficient n-octanol/water (log value) |
log Kow=-5.08(calculated) |
USEPA, 2011
|
Henry Law Constant |
2.814E-023 atm-m3/mole (2.851E-018 Pa-m3/mole) |
USEPA, 2011 |
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
