Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 203-347-8
CAS number: 105-95-3
Skin exposure - Remove contaminated clothes. Wash skin with large volumes of water (or soap and water). If irritation persists, or any sign of tissue damage is apparent, obtain medical advice immediately.
Eye exposure - Irrigate copiously with water for at least 10 minutes. Obtain medical advice if any irritation or evidence of tissue damage persists.
Accidental ingestion - Rinse mouth with water. Give up to one tumbler (half pint) of milk or water. Obtain medical advice immediately.
Excessive inhalation - Remove the individual to fresh air and keep at rest. Obtain medical advice immediately.
General comments - As in all cases of potential poisoning, supportive therapy is of the utmost importance.
In the event of fire, dry powder, carbon dioxide, alcohol-resistant foam or water mist extinguishers should be used. Avoid inhalation of smoke and fumes. In case of insufficient ventilation, wear suitable respiratory equipment.
Personal precautions - Gloves (natural rubber if possible) should be worn when handling spillages. Half-mask should be worn when handling spillages. No smoking. Avoid naked flames or other potential sources of ignition (eg. electrical equipment). Avoid skin contamination and inhalation of vapour. Good personal washing routines should be followed after accidental releases.
Ensure adequate ventilation in working areas following accidental releases.
Environmental precautions - Do not discharge directly into drains, into soil or into the aquatic environment.
Methods for cleaning up - Any absorbent used for cleaning up spillage should be disposed promptly, preferably by incineration as some cases of spontaneous combustion of rags soaked with similar materials have been reported. Gross spiliages should be contained by the use of sand or inert powder, and disposal of this should be in accordance with Government Regulations.
Handling - Avoid contact with skin and eyes. Wear suitable gloves (natural rubber is the preferred material) and eye/face protection, an half-mask. No smoking. Avoid naked flames or other potential sources of ignition (eg. electrical equipment). Do not subject to unnecessarily high temperature during processing. Do not ingest or apply to the skin as such. Good personal washing routines should be followed. Maintain adequate ventilation in working areas.
Storage - It is good general practice to store in closed, preferably full, containers away from heat sources, and protected from extremes of temperature. Do not reuse the empty container.
This substance is handled under Strictly Controlled Conditions in accordance with REACH regulation Article 17(3) for on-site isolated intermediates and, in case the substance is transported to other sites for further processing, the substance should be handled at these sites under the Strictly Controlled Conditions as specified in REACH regulation Article 18(4). Site documentation to support safe handling arrangements including the selection of engineering, administrative and personal protective equipment controls in accordance with risk-based management system is available at each manufacturing site.
Written confirmation of application of Strictly Controlled Conditions has been received from every affected Distributor and Downstream Processor/User of the Registrant's intermediate.
- Exposure controls - Do not subject to unnecessarily high temperature during processing. Maintain adequate ventilation in working areas.
- Personal protection
- Respiratory protection: where ventilation may be inadequate, wear self-contained breathing apparatus.
- Hand protection: where gloves are indicated, natural rubber is the preferred material.
- Eye protection: where eye protection is indicated, safety goggles are recommended.
- Skin protection: depending on working situation these should include wearing protective clothing, which will also limit the odour contamination of personal clothing. Good personal washing routines should be followed.
Good stability at standard temperature. Avoid temperatures above or near to the flash point. Do not heat closed containers. No reaction known with water. Contact with water or storage under recommended conditions for one year should not produce dangerous decomposition products. Avoid contact with oxidizing agents.
Residual quantities of the product should be treated according to the instructions given under points 6, 7 and 8 of the SDS. Wastes should be eliminated according to national or regional regulatory requirements currently in force.
The generation of hazardous wastes in terms of quantity and hazardousness should be minimized, by disposing them as close to the source of generation as possible, thus reducing the movement of hazardous wastes.
For the disposal of wastes and packaging material, the services of a licensed waste management company is advised, with recycler, reclaimer, landfill, incinerator or other thermal destruction devices.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
Deze website maakt gebruik van cookies om het surfen zo aangenaam mogelijk te maken.
Welcome to the ECHA website. This site is not fully supported in Internet Explorer 7 (and earlier versions). Please upgrade your Internet Explorer to a newer version.
Do not show this message again