Registration Dossier

Administrative data

First-aid measures

Inhalation: If high concentrations are inhaled, immediately remove to fresh air. Keep persons calm. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Call a physician.
Skin contact: In case of skin contact, flush with water for 15 minutes. Get medical attention if irritation is present.
Eye contact: In case of eye contact, immediately flush eyes with plenty of water for 15 minutes. Call a physician.
Ingestion: No specific intervention is indicated, as the compound is not likely to be hazardous by ingestion. Consult a physician if necessary. Do not induce vomiting because the hazard of aspirating the material into the lungs is considered greater than swallowing it.

Fire-fighting measures

Extinguishing media: This substance is incombustible, so select and use a suitable fire fighting agent on the surrounding fire e.g. CO2, dry powder foam or water extinguishers.
Unusual fire and explosion hazards: Containers may rupture under fire conditions. Decomposition may occur.
Special fire fighting precaution/instructions: Use water spray to cool containers. Self-contained breathing apparatus (SCBA) is required if drums rupture and contents are spilled under fire conditions.
Additional information: Move container from fire areas if it can be done without risk. Cool containers with water spray. Fire residues and contaminated firefighting water must be disposed in accordance with the local regulations.

Accidental release measures

Personal precautions: Ensure adequate ventilation. Use personal respiratory protection, impermeable gloves, chemical splash goggles and protective clothing.
Environmental precautions: Collect contaminated water/firefighting water separately. Do not wash away into shower or waterway.
Methods for cleaning up/taking up: Take up with absorbent material(e.g. sand, general-purpose binder). Collect on absorbent material and transfer to steel drums or recovery/dispose.
Additional information: Do not allow product to contact open flame or electrical heating elements. Comply with all EU, national and local regulations on reporting releases.

Handling and storage

Handling: Use with sufficient ventilation. Provide adequate ventilation for storage, handling, and use, especially for enclosed or low spaces. Avoid contact of liquid with eyes and prolonged skin exposure. Do not allow product to contact open flame or electrical heating elements because dangerous decomposition products may form.
Storage: Avoid placing sealed containers under direct sunlight, but store them in a well-ventilated area, at room temperature. Don’t store near heat, sparks or open flames.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

Remarksopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Engineering controls:
Normal ventilation for standard manufacturing procedures is generally adequate.
Local exhaust should be used when large amounts are released.
Mechanical ventilation should be used in low places.
An eye wash and safety shower should be nearby and ready for use.
Impermeable apron and boots to prevent skin contact.
Personal protective equipment:
Respiratory protection: Ventilation Under normal manufacturing conditions, respiratory protection is required when using this product. Self-contained breathing apparatus (SCBA) is required if a large spill occurs.
Skin: Impervious gloves should be used avoid prolonged or repeated exposure.
Eye protection: Chemical splash goggles should be available for use as needed to prevent eye contact.
Additional recommendations: An eye wash and safety shower should be nearby and ready for use. Impermeable apron and boots to prevent skin contact.

Stability and reactivity

Stability: Stable. Material is stable under normal conditions.
Condition to Avoid: Material is stable under normal conditions. However, avoid open flames and high temperature and active metals. But alkaline or acid cause slightly decomposition.
Materials to Avoid (Incompatibilities): Alkaline, acid, active reagent.
Hazardous Decomposition or Byproducts: Decomposition products are hazardous. This compound can be decomposed by high temperatures (open flames, glowing metal surfaces, etc.) forming hydrofluoric acids and carbonyl fluoride.

Disposal considerations

Recover by distillation or remove to permit to waste disposal facility. Reuse when possible the residual product. Send waste product for thermal destruction, using high temperature incinerators designed to burn fluorine compounds. Reuse containers when possible, after thorough washing. Dispose of waste containers to authorized landfill, in accordance with local laws and regulations.
Do not dump this product into sewers, on the ground or into any body of water.