Registration Dossier

Physical & Chemical properties

Flash point

Currently viewing:

Administrative data

Link to relevant study record(s)

Reference
Endpoint:
flash point, other
Remarks:
liquid
Type of information:
experimental study
Adequacy of study:
key study
Study period:
24-04-2017 – 24-04-2017
Reliability:
1 (reliable without restriction)
Rationale for reliability incl. deficiencies:
guideline study
Justification for type of information:
Experimental result performed using standard methods of analysis
Qualifier:
according to
Guideline:
other: OECD 103
Principles of method if other than guideline:
The flash point of a substance is the lowest temperature at which there will be enough flammable vapor to ignite when an ignition source is applied.
GLP compliance:
no
Type of method:
closed cup
Flash point apparatus:
Pensky-Martens apparatus
Key result
Flash point:
109.6 °C
Atm. press.:
970.8 hPa
Remarks on result:
other: no other details available
Interpretation of results:
GHS criteria not met
Conclusions:
The flash point determination of test chemical 3,7-dimethyloct-6-enyl isobutyrate was done following closed cup method using Pensky-Martens flash point apparatus. The test chemical 3,7-dimethyloct-6-enyl isobutyrate was conducted in replicates and mean flash point was determined to be 109.6°C at 970.8hPa.
Executive summary:

The flash point determination of test chemical 3,7-dimethyloct-6-enyl isobutyrate was done following closed cup method using Pensky-Martens flash point apparatus. The test chemical 3,7-dimethyloct-6-enyl isobutyrate was conducted in replicates and mean flash point was determined to be 109.6°C at 970.8hPa.

Description of key information

The flash point determination of test chemical 3,7-dimethyloct-6-enyl isobutyrate was done following closed cup method using Pensky-Martens flash point apparatus. The test chemical 3,7-dimethyloct-6-enyl isobutyrate was conducted in replicates and mean flash point was determined to be 109.6°C at 970.8hPa.

Key value for chemical safety assessment

Flash point at 101 325 Pa:
109.6 °C

Additional information

The flash point determination of test chemical3,7-dimethyloct-6-enyl isobutyratewas done following closed cup method using Pensky-Martens flash point apparatus. The test was conducted in replicates and mean flash point was determined to be 109.6°C at 970.8hPa.

Other supporting study from reliable handbook also suggests that the flash point of test chemical3,7-dimethyloct-6-enyl isobutyratewas determined to be 100 degree C.

As the data from lab has K1 reliability and the test was performed using OECD guidelines which has the value of flash point temperature as 109.6 degree C thus considered as key study for the chemical safety assessment.