Registration Dossier

Diss Factsheets

Guidance on Safe Use

Guidance on Safe Use

Currently viewing:

Administrative data

First-aid measures

Skin contact: take off contaminated clothes. Wash out skin with plenty of water with soap. Consult a
doctor, if symptoms persist.



Eye contact: wash out with plenty of water with the eyelid hold wide open, for 10-15 min. Remove
any contact lenses. Avoid powerful water stream – risk of cornea damage. Obtain medical attention
immediately.



Ingestion: induce vomiting. rinse mouth with water; give plenty of water to drink. Consult a doctor –
show the container or label. Do not give anything to drink to an unconscious person.



Inhalation: remove to fresh air, keep warm and calm. In case of some symptoms consult a doctor –
show the container or label.

Fire-fighting measures

Extinguishing media
Suitable extinguishing media: dry extinguishing, carbon dioxide, water spray. Use extinguishing meas
ures that are appropriate to the environment.Unsuitable extinguishing media: water jet – risk of the
propagation of the flame.



Special hazards arising from the substance or mixture
May produce toxic fumes, eg. carbon oxide and nitrogen oxide if burning. Do not inhale combustion
products – it can be dangerous for health.



Advice for firefighters
Flammable liquid and vapours. Vapours are heavier than air and may create explosive mixtures
with it. Personal protection typical in case of fire. Self-contained breathing apparatus and protective
clothing should be worn. Tanks exposed to fire or high temperatures to be cooled down with water,
whenever possible, removed from the endangered area.

Accidental release measures

Personal precautions, protective equipment and emergency procedures
Limit the access for the outsiders into the breakdown area, until the suitable cleaning operations
are completed. Wear adequate personal protective equipment. Avoid contact with skin and eyes.
Remove all ignition sources. Do not smoke. Use means preventing electrostatic discharges. Ensure
adequate ventilation. Avoid inhalation vapours.


Environmental precautions
In case of release of large amounts of the product, it is necessary to take appropriate steps to prevent
it from spreading into the environment. Notify relevant emergency services.

Methods and material for containment and cleaning up
Reduce leak with dams. In case of a large leakage, collect the liquid or pump it to tight closed conta
iners. Cover the remainder with neutral sorbent (sand, diatomaceous soil), collect to tight closed c
ontainers, and rinse the contaminated place with plenty of water or water acidified with diluted mineral
acid. In case of a little leakage, rinse the liquid with plenty of water or acidified water. Forward the
collected product to an authorized waste recipient.

Handling and storage

Precautions for safe handling
Handle in accordance with good occupational hygiene and safety practices. Ensure good ventilation
of the rooms and ventilating hoods at workplaces. Do not inhale dusts. Before break and after work
wash carefully hands. Avoid skin and eyes contamination. Keep not used containers tightly closed.
Use only with purpose. Do not ingestion. Remove all ignition sources. Use means preventing elec
trostatic discharges.



Conditions for safe storage, including any incompabilities
Keep only in original, tightly closed containers in the atmosphere of nitrogen in dry, cool and wellventilated
place. Recommended storage temperature 5 – 30o C. Keep away from fire source. Use
means of caution preventing electrostatic discharges. Protect against direct operation of solar rays,
freezing, humidity, contact with air and oxygen. Keep away from flammable substances. Do not keep
with oxidizing substances. Keep away from food, beverages or feed for animals. Recommended mat
erial for packages: HDPE with Teflon seals, acid-resistant steel. Do not use natural and synthetic
rubber and some plastics.

Transport information

Land transport (UN RTDG/ADR/RID)

UN number:
1993
Shipping information
Proper shipping name and description:
FLAMMABLE LIQUID, N.O.S.(N,N-DIETHYLHYDROXYLAMINE)
Chemical name:
(Diethylhydroxylamine, 98% solution)
Class or division:
Class 3: Flammable liquids
Packing group:
Packing group III: Substances presenting low danger
Labels:
3
SpecialProvisionsopen allclose all

Inland waterway transport (UN RTDG/ADN(R))

UN number:
1993
Shipping information
Proper shipping name and description:
FLAMMABLE LIQUID, N.O.S.(N,N-DIETHYLHYDROXYLAMINE)
Chemical name:
(Diethylhydroxylamine, 98% solution)
Class or division:
Class 3: Flammable liquids
Packing group:
Packing group III: Substances presenting low danger
Labels:
3
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

UN number:
1993
Shipping information
Proper shipping name and description:
FLAMMABLE LIQUID, N.O.S. (N,N-DIETHYLHYDROXYLAMINE)
Chemical name:
(Diethylhydroxylamine, 98% solution)
Class or division:
Class 3: Flammable liquids
Packing group:
Packing group III: Substances presenting low danger
EmS code:
F-E
S-E
Labels:
3
Marine pollutant
Remarksopen allclose all

Air transport (UN RTDG/ICAO/IATA)

UN number:
1993
Shipping information
Proper shipping name and description:
Flammable liquid, n.o.s. (N,N-Diethylhydroxylamine)
Chemical name:
(Diethylhydroxylamine, 98% solution)
Class or division:
Class 3: Flammable liquids
Packing group:
Packing group III: Substances presenting low danger
Labels:
3
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Control parameters Product doesn’t contain any components with occupational exposure limit values
at working place in Community. Please check any national occupational exposure limit values in your
country.


Exposure controls
Use the product in accordance with good occupational hygiene and safety practices. Ensure that
there is sufficient general ventilation with exchange of air and / or ventilating hoods in the work area.
Avoid skin and eyes contamination. Do not inhale vapours. When handlings do not eat, drink or
smoke. Before break and after work carefully wash hands. Do not use close to ignition sources and
sources of high temperatures. In the case of insufficient ventilation, use means of protection of the
respiratory system. Ensure a shower and a post for rinsing eyes.


Hand and body protection


Use gloves from PCV or rubber. Use natural protective clothing materials (cotton) or synthetic fibers and protective footwear.
The material that the gloves are made of must be impenetrable and resistant to the product’s effects.
The selection of material must be performed with consideration of breakthrough time, penetration
speed and degradation. Moreover, the selection of proper gloves depends not only on the material,
but also on other quality features and changes depending on the manufacturer. The producer shou
ld provide detailed information regarding the exact breakthrough time. This information should be fo
llowed.



Eye/face protection
Use safety glasses (goggles) in the case of dust.



Respiratory protection Use mask with filt type A. Environmental exposure controls Do not allow the lar
ge quantity of mixture to contaminate surface water/ground water.

Stability and reactivity

Reactivity
It reacts with strong oxidizing.



Chemical stability
The product is stable.



Possibility of hazardous reactions
None.



Conditions to avoid
High temperature, humidity, ignition sources.



Incompatible materials
Oxidizers (perchlorates, peroxides), acids, nitrates.



Hazardous decomposition products
None.

Disposal considerations

Waste treatment methods
Disposal methods for the product: disposal in accordance with the local legislation. Do not remove
with household garbage. Store remaining in original containers. Recycle, if possible.
Disposal methods for used packing: empty containers give for appropriate rubbish dump or for
disposal in accordance with the local legislation. Dispose of uncleanable containers like of the p
roduct. Legal basis: in accordance with local and national regulations.