Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 202-895-5
CAS number: 100-85-6
General advice: Do not get in eyes, on skin, or on clothing. Do not breathe vapor or mist. Immediately remove substance contaminated clothes and wash affected skin areas with soap and water
Eye contact: In the case of contact with eyes, rinse immediately with plenty of water and seek medical advice. Keep eye wide open while rinsing.
Skin contact: Wash off immediately with soap and plenty of water while removing all contaminated clothes and shoes.
Ingestion: Do not induce vomiting without medical advice. Rinse mouth immediately and drink plenty of water. Never give anything by mouth to an unconscious person. Call a physician or poison control center immediately.
Inhalation: Move to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Call a physician or poison control center immediately.
Self-protection of the first aider: Avoid contact with eyes, skin and clothing.
Most important symptoms and effects, both acute and delayed: No information available.
Indication of any immediate medical attention and special treatment needed, notes to physician: Treat symptomatically.
Suitable Extinguishing Media: Use water spray. Carbon dioxide (CO2). Foam. Dry chemical.
Extinguishing media which shall not be used for safety reasons: Do not use water jetstream.
Specific hazards arising from the chemical: Causes severe burns. Produce flammable and toxic gases on contact with water.
Protective equipment and precautions for firefighters: Corrosive hazard. Wear protective gloves/clothing and eye/face protection. In case of fire: Wear self-contained breathing apparatus.
Personal precautions, protective equipment and emergency procedures: Avoid contact with skin and eyes. Do not breathe vapor or mist. Keep people away from and upwind of spill/leak.
Environmental precautions: Prevent further leakage or spillage if safe to do so. Prevent product from entering drains. Do not flush into surface water or sanitary sewer system.
Methods and materials for containment and cleaning up: Prevent spreading over a wide area (e.g. by containment or oil barriers)
Methods for cleaning up: Soak up with inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust).
Handling: Do not breathe vapor or mist. Do not eat, drink or smoke when using this product. Do not get in eyes, on skin, or on clothing. Do not ingest. Wear personal protective clothing. Handle in accordance with good industrial hygiene and safety practice. Ensure that eyewash stations and safety showers are close to the workstation location. Ensure adequate ventilation.
Storage: Keep tightly closed in a dry and cool place. Keep in properly labeled containers. stainless steel. Polyethylene containers.
Shelf life: No information available
Engineering Controls: Ensure adequate ventilation, especially in confined areas. To protect against splashes from pouring. Avoid formation of aerosol.
Personal Protective Equipment
Eye Protection: Tightly fitting safety goggles. If splashes are likely to occur, wear:. Face protection shield.
Skin Protection: Chemical resistant apron. Impervious clothing. Rubber gloves. Nitrile rubber. Neoprene gloves.
Hand Protection: Rubber gloves. Nitrile rubber. Neoprene gloves.
Respiratory protection: In case of mist, spray or aerosol exposure wear suitable personal respiratory protection and protective suit.
Protective equipment: Ensure that eyewash stations and safety showers are close to the workstation location.
General Hygiene Considerations: Handle in accordance with good industrial hygiene and safety practice. Do not eat, drink or smoke when using this product. Take off all contaminated clothing and wash it before reuse. Wash hands before breaks and immediately after handling the product.
Environmental Exposure Controls: Prevent product from entering drains.
Reactivity: No information available
Chemical Stability: Stability Stable under normal conditions.
Possibility of hazardous reactions: Hazardous Reactions Hazardous polymerization does not occur.
Conditions to Avoid: To avoid thermal decomposition, do not overheat.
Materials to avoid: Strong acids. Strong oxidizing agents.
Hazardous Decomposition Products: Thermal decomposition can lead to release of irritating and toxic gases and vapors, Amines, Alcohols
Disposal Considerations: Dispose of contents/containers in accordance with local regulations. Do not discharge product into the aquatic environment without pretreatment (biological treatment plant). Can be incinerated, when in compliance with local regulations
Waste from residues/unused products: Should not be released into the environment. Treat rinsing as for product disposal
Contaminated packaging: Empty remaining contents. Triple rinse containers
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
På den här webbplatsen används kakor. Syftet är att optimera din upplevelse av den.
Welcome to the ECHA website. This site is not fully supported in Internet Explorer 7 (and earlier versions). Please upgrade your Internet Explorer to a newer version.
Do not show this message again