Registration Dossier

Administrative data

First-aid measures

Emergency measure - Inhalation: Remove to fresh air. Seek medical attention.
Emergency measure - Eyes: Rinse eyes with plenty of running water. If irritation
occurs seek medical attention.
Emergency measure - Skin: Wash with copious amounts of soap and water. Launder clothes
before re-use. If irritation occurs seek medical attention.
Emergency measure - Ingestion: Seek medical attention.

Fire-fighting measures

Recommended extinguishing agent: Foam, carbon dioxide, dry powder.

Product arising from burning: The substance is combustible and will burn if involved in a
fire, evolving noxious fumes (eg carbon oxides).

Product determined by test: N

Protective equipment: Full protective clothing and self-contained breathing
apparatus must be worn.


Fight the fire from a safe distance or protected location.

Accidental release measures

Emergency measures in case of spillage: Evacuate personnel from immediate vicinity.


Wear appropriate personal protective equipment conforming to
the relevant national or international standards, as
mentioned in section 2.3.10.


Absorb spillages of solutions with a suitable inert material
(eg. sand or soil). Carefully transfer the spillage to waste
containers, or use a sealed industrial vacuum machine.
Containers filled with waste material must be labelled in
the same way as the original substance containers.


Clean the spillage area with soap and water. Avoid washing
waste to drains.


Dispose of waste material in accordance with local
regulations by incineration.

Handling and storage

Handling: The substance should be stored, handled and used under
conditions of good industrial hygiene and in conformity with
any local regulations in order to avoid exposure.


Engineering controls are necessary to reduce exposure to the
substance.


When exposure cannot be prevented or adequately controlled
appropriate personal protective equipment should be worn.

Such protective equipment should conform to the appropriate
international or national standards as follows;

Chemical protective gloves to Standard prEN374

Chemical protective clothing to Standard EN368

Eye protection to Standard EN166.

Furthermore, when respiratory protective equipment has to be
used, it must be capable of adequately controlling exposure,
be suitable for the purpose, and conform to the appropriate
international or national standards, such as a vapour mask
conforming to EN405.

These measures should be regarded as a minimum.

Storage: Store in the dark under a nitrogen blanket away from sources
of ignition.


Keep containers tightly closed when not in use.

Packaging of the substance and or preparation: 200 litre mild steel drum.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

Remarksopen allclose all

Air transport ICAO/IATA

Remarks
Transport code: Class 3, Flammable liquids, PG III
Transport: Avoid crushing the containers. In the event of a spillage,
observe the warning labels on the container.
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Stability and reactivity

Danger other than fire: None reported

Chemical reaction with water: None reported

Dust explosion: Not applicable as substance is a liquid.

Dust explosion determined by test: N

Disposal considerations

Industry - Possibility of recovery/recycling: Handling of the substance will be by trained operators, and
will be kept to a minimum.


Discharge to the environment will be minimal. Recovery from
minor spillages or accidental discharge is not economically
or technically feasible, and such waste material will be
disposed of by incineration. In principle, it may be
possible to recover larger spillages of uncontaminated
material for subsequent use.

Industry - Possibility of neutralisation: The notification tests have shown that the substance is
corrosive and potentially mutagenic.


No chemical treatment is practicable to neutralise the
hazardous health properties.


The substance is a liquid, therefore, there is no potential
dust explosion hazard.


No chemical treatment is practicable to neutralise the
hazardous environmental properties.

Industry - Possibility of destruction: controlled discharge: Contaminated containers or spillages of solutions mixed with
inert material (eg. sand or soil) may be disposed of by
incineration.

Industry - Possibility of destruction - incineration: The substance can be disposed of by incineration by burning
under controlled conditions at a licensed waste treatment
processor in accordance with local regulations. Stack gases
should be scrubbed, because noxious fumes (eg. carbon
oxides) could be formed.

Industry - Possibility of destruction - water purification: The substance should not normally be discharged directly to
the sewage system or the aqueous environment.

Public at large - Possibility of recovery/recycling: Not applicable as 100% of the substance will be used in
industry and will not be available to the public.

Public at large - Possibility of neutralisation: Not applicable as 100% of the substance will be used in
industry and will not be available to the public.

Public at large - Possibility of destruction: controlled discharge: Not applicable as 100% of the substance will be used in
industry and will not be available to the public.

Public at large - Possibility of destruction - incineration: Not applicable as 100% of the substance will be used in
industry and will not be available to the public.

Public at large - Possibility of destruction - water purification: Not applicable as 100% of the substance will be used in
industry and will not be available to the public.

Public at large - Possibility of destruction - others: Not applicable as 100% of the substance will be used in
industry and will not be available to the public.