Registration Dossier
Registration Dossier
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 215-149-9 | CAS number: 1306-25-8
Additional physico-chemical information
Administrative data
- Endpoint:
- other: Moisture
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Study period:
- 2016-07-22 to 2016-07-27
- Reliability:
- 1 (reliable without restriction)
- Rationale for reliability incl. deficiencies:
- test procedure in accordance with generally accepted scientific standards and described in sufficient detail
Data source
Reference
- Reference Type:
- study report
- Title:
- Unnamed
- Year:
- 2 016
- Report date:
- 2016
Materials and methods
Test guideline
- Qualifier:
- equivalent or similar to guideline
- Guideline:
- other: EN15051-1 “Workplace Exposure: Measurement of dustiness of bulk materials – Part 1: Requirements and choice of test methods”
- Version / remarks:
- Powder samples are tested for bulk density using the internal method SOP-024 “Determination of Moisture Content of Bulk Powders”. The technique for moisture is adopted from EN15051-1 “Workplace Exposure: Measurement of dustiness of bulk materials – Part 1: Requirements and choice of test methods”.
- Principles of method if other than guideline:
- Powder samples are tested for bulk density using the internal method SOP-024 “Determination of Moisture Content of Bulk Powders”. The technique for moisture is adopted from EN15051-1 “Workplace Exposure: Measurement of dustiness of bulk materials – Part 1: Requirements and choice of test methods”.
- GLP compliance:
- no
Test material
- Reference substance name:
- Cadmium telluride
- EC Number:
- 215-149-9
- EC Name:
- Cadmium telluride
- Cas Number:
- 1306-25-8
- Molecular formula:
- CdTe
- IUPAC Name:
- telluroxocadmium
Constituent 1
Results and discussion
- Results:
- Moisture was measured at 5.3 %.
Applicant's summary and conclusion
- Conclusions:
- Moisture was measured at 5.3 %.
- Executive summary:
Powder samples are tested for bulk density using the internal method SOP-024 “Determination of Moisture Content of Bulk Powders”. The technique for moisture is adopted from EN15051-1 “Workplace Exposure: Measurement of dustiness of bulk materials – Part 1: Requirements and choice of test methods”.
Moisture was measured at 5.3 %.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
