Registration Dossier

Guidance on Safe Use

Guidance on Safe Use

Currently viewing:

Administrative data

First-aid measures

Inhalation Remove the affected person to fresh air, keep at rest in half upright position and loosen clothing if necessary. If symptomspersist, seek medical attention.
Ingestion Rinse mouth with plenty of water or milk to drink. If symptoms persist, seek medical attention.
Eye Contact Irrigate with eye wash solution or clean water holding the eyelids apart for at least 15 minutes. If symptoms persist, seek medical attention.
Skin Contact Wash skin immediately with soap and water. If symptoms persist, seek medical attention.
Further Medical Treatment Not Known

Fire-fighting measures

Suitable extinguishing media: no restriction
Special hazards caused by the material, its combustion products or resultant gases: none
Special personal protection equipment: none

Accidental release measures

Environmental protection conduct: Do not sweep or wash into public stretches of water,sewers or sites of unknown discharge paths.
After spillage/leakage/gas/ leakage:Clean up immediately with wetting or absorbent material avoiding dusting.

Handling and storage

Handling:Usual precautions for nuisance dust should be observed.
Protection against fire and explosion:The product is non-flammable
Storage:Store in roofed places at room temperature Keep containers tightly sealed.
Flammability Class: nor applicable.

Transport information

Land transport (ADR/RID)

UN number:
UN3077
Proper shipping name and description:
3077 ENVIRONMENTALLY HAZARDOUS
SUBSTANCE, SOLID, N.O.S. (ferrate(4-),
hexakis(cyano-C)-, Et 2-[6-(ethylamino)-3-
(ethylimino)-2,7-dimethyl-3H-xanthen-9-yl]
benzoate copper(2+) salts)
Chemical name:
ferrate(4-), hexakis(cyano-C)-, Et 2-[6-(ethylamino)-3-(ethylimino)-2,7-dimethyl-3H-xanthen-9-yl]benzoate copper(2+) salts
Language:
English
Class:
9
Classification code:
90
Packaging group:
III
Labels:
9
SpecialProvisionsopen allclose all

Inland waterway transport (ADN(R))

UN number:
UN3077
Proper shipping name and description:
3077 ENVIRONMENTALLY HAZARDOUS
SUBSTANCE, SOLID, N.O.S. (ferrate(4-),
hexakis(cyano-C)-, Et 2-[6-(ethylamino)-3-
(ethylimino)-2,7-dimethyl-3H-xanthen-9-yl]
benzoate copper(2+) salts)
Chemical name:
ferrate(4-), hexakis(cyano-C)-, Et 2-[6-(ethylamino)-3-(ethylimino)-2,7-dimethyl-3H-xanthen-9-yl]benzoate copper(2+) salts
Language:
English
Class:
9
Packaging group:
III
Labels:
9
Remarksopen allclose all

Marine transport (IMDG)

UN number:
UN3077
Proper shipping name and description:
ENVIRONMENTAL L Y HAZ ARDOUS
SUBSTANCE, SOLID, N.O.S. (ferrate(4-),
hexakis(cyano-C)-, Et 2-[6-(ethylamino)-3-
(ethylimino)-2.7-dimethyl-3H-xanthen-9-yl]
benzoate copper (2+) sal ts) , MARINE
POLLUTANT
Chemical name:
ferrate(4-), hexakis(cyano-C)-, Et 2-[6-(ethylamino)-3-(ethylimino)-2,7-dimethyl-3H-xanthen-9-yl]benzoate copper(2+) salts
Class:
9
Packaging group:
III
EmS code:
F-A,S-F
Labels:
9
Marine pollutant
Remarksopen allclose all

Air transport ICAO/IATA

UN number:
UN3077
Proper shipping name and description:
Environmentally hazardous substance, solid,
n.o.s. (ferrate(4-), hexakis(cyano-C)-, Et 2-[6-
(ethylamino)-3-(ethylimino)-2.7-dimethyl-3Hxanthen-
9-yl]benzoate copper(2+) salts)
Chemical name:
ferrate(4-), hexakis(cyano-C)-, Et 2-[6-(ethylamino)-3-(ethylimino)-2,7-dimethyl-3H-xanthen-9-yl]benzoate copper(2+) salts
Class:
9
Packaging group:
III
Labels:
9
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Respiratory protection:An appropriate dust fixer has to be used if a breathable dust liberated.
Hand Protection PVC gloves for hygiene purposes.
Eye Protection Safety glasses or goggles.
Skin Protection Wear PVC apron. Avoid contact with the material.
Environmental Exposure Controls Any spillages should be thoroughly cleaned up.

Stability and reactivity

Hazardous decomposition products.No decomposition at proper storage and application conditions

Disposal considerations

Uses should acquaint themselves with local regulations.Disposal is usually carried out by burying at an approved tip or by incineration by a licensed waste material processor; stack gases may need to be sorubbed.