Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 203-313-2
CAS number: 105-60-2
Immediately remove contaminated clothing. Avoid contact with the skin, eyes and clothing.
Keep patient calm, remove to fresh air, seek medical attention.
On skin contact:
Wash thoroughly with soap and water. Burns caused by molten material require hospital treatment.
On contact with eyes:
Immediately wash affected eyes for at least 15 minutes under running water with eyelids held open,
consult an eye specialist.
Rinse mouth immediately and then drink 200-300 ml of water, seek medical attention.
Suitable extinguishing media:
foam, carbon dioxide, water spray
hydrogen cyanide, nitrogen oxides
The substances/groups of substances mentioned can be released in case of fire.
Collect contaminated extinguishing water separately, do not allow to reach sewage or effluent
Ensure adequate ventilation. Avoid contact with skin and eyes. Use breathing apparatus if exposed to vapours/dust/aerosol.
Do not empty into drains. Retain and dispose of contaminated wash water.
Methods for cleaning up or taking up:
For large amounts: Allow to solidify and sweep/shovel up.
For residues: Rinse away with water.
Ensure thorough ventilation of stores and work areas. Avoid contact with skin and eyes. Wear suitable protective clothing and eye/face protection. Handle in accordance with good industrial hygiene and safety practice.
During transportation in silo trucks the product
is covered with nitrogen, do not climb in.
Protection against fire and explosion:
Vapours may form explosive mixture with air. Dust can form an explosive mixture with air.Take precautionary measures against static
Segregate from acids and bases. Segregate from oxidants.
Suitable materials for containers: Stainless steel 1.4301 (V2), Stainless steel 1.4401
glass, tinned carbon steel (Tinplate), Carbon steel (Iron)
Further information on storage conditions: Keep under nitrogen.
Storage temperature for liquid melt: 75 - 90 °C
The stated storage temperature should be noted.
Tablets: Store in unopened original containers in a cool and dry place.
Components with workplace control parameters
marine water: 0.2 mg/l
intermittent release: 1 mg/l
sediment (freshwater): 18.7 mg/kg
sediment (marine water): 1.87 mg/kg
soil: 2.55 mg/kg
STP: 1737 mg/l
Short-term exposure - local effects, Inhalation: 5 mg/m3Personal protective equipment
Respiratory protection in case of vapour/aerosol release. Gas filter for gases/vapours of organic compounds (boiling point >65 °C, e. g. EN 14387 Type A)
Chemical resistant protective gloves (EN 374)
Suitable materials also with prolonged, direct contact (Recommended: Protective index 6, corresponding > 480 minutes of permeation time
according to EN 374):
butyl rubber (butyl) - 0.7 mm coating thickness
nitrile rubber (NBR) - 0.4 mm coating thickness
Manufacturer's directions for use should be observed because of great diversity of types.
Tightly fitting safety goggles (splash goggles) (e.g. EN 166)
Body protection must be chosen depending on activity and possible exposure, e.g. apron, protecting boots, chemical-protection suit (according to EN 14605 in case of splashes or EN ISO 13982 in case of dust).
General safety and hygiene measures
Handle in accordance with good industrial hygiene and safety practice. Take off immediately all contaminated clothing. At the end of the shift the skin should be cleaned and skin-care agents applied.
No hazardous reactions if stored and handled as prescribed/indicated.
Corrosion to metals:
No corrosive effect on metal.
Reactions with water/air:
Which flammable gases:
Incomplete combustion results in formation of toxic gases, containing mainly carbon monoxide and carbon dioxide.
Which toxic gases:
Formation of flammable gases:
Forms no flammable gases in the presence of water.
The product is stable if stored and handled as prescribed/indicated.
Possibility of hazardous reactions
Reacts with oxidizing agents. Polymerization coupled with heat formation.
Conditions to avoid
Temperature: > 100 °C
Avoid all sources of ignition: heat, sparks, open flame. Avoid formation of polymers in valves and pipes.
Substances to avoid: oxidizing agents
Hazardous decomposition products
Thermal decomposition products:
No hazardous decomposition products if stored and handled as prescribed/indicated. Incomplete combustion results in formation of toxic gases, containing mainly carbon monoxide and carbon dioxide.
Waste treatment methods
Incinerate in suitable incineration plant, observing local authority regulations.
Uncleaned empties should be disposed of in the same manner as the contents.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
Deze website maakt gebruik van cookies om het surfen zo aangenaam mogelijk te maken.
Welcome to the ECHA website. This site is not fully supported in Internet Explorer 7 (and earlier versions). Please upgrade your Internet Explorer to a newer version.
Do not show this message again