Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 940-783-4
CAS number: -
General information: Consult physician
After inhalation: Move victim to fresh air. Put victim at rest and keep warm. In case of irritation of the respiratory tract seek medical advice.
After contact with skin: After contact with skin, wash immediately with plenty of Water and soap. In case of skin irritation, seek medical treatment.
After contact with eyes: Immediately flush eyes with plenty of flowing water for 10 to 15 minutes holding eyelids apart. Consult anopthalmologist.
After ingestion: Rinse mouth immediately and drink large quantities of water.
Suitable extinguishing media: Carbon dioxide (CO2). Foam. Extinguishing powder. Water spray. Atomized water.
Extinguishing media which must not be used for safety reasons: High power water jet.
Special exposure hazards arising from substance or preparation itself, combustion products, resulting gases: Formaldehyde. Hydrochloric (HCl). Carbon monoxide. Carbon dioxide (CO2).
Special protective equipment for fire-fighters: In case of fire: Wear self-contained breathing apparatus.
Additional information: Contaminated fire-fighting water must be collected separately. Do not empty into drains or the aquatic environment.
Personal precautions: Wear personal protection equipment. Avoid contact with skin and eyes.
Environmental precautions: Do not empty into drains or the aquatic environment.
Methods for cleaning up/taking up: Soak up inert absorbent and dispose as waste requiring special observation. (Sand, Kieselgur.)
Advice on safe handling: In case of open handling equipment with built-in suction must be used. It is recommended to organise all working processes in order to exclude the following: skin contact. Eye contact. Working areas must be arranged in such a manner that they can be cleaned at all times.
Advice on protection against fire and explosion: Take precautionary measures against static discharges.
Requirements for storage rooms and vessels: Keep container tightly closed in a cool, well-ventilated place. Do not empty into drains or the aquatic environment. Further information on storage conditions: Keep away from food, drink and animal feedingstuffs.
Occupational exposure controls: Bis(2-chloroethoxy)methane and 1,15-dichloro-3,5,8,11,13-pentaoxa-pentadecane (PrePolymer D): To date, no national limit values exist.
Protective and hygiene measures: Wash hands before breaks and at the end of work. Do not eat, drink, smoke or sneeze at the workplace.
Respiratory protection: Do not breathe gas/fumes/vapour/spray.
Hand protection: Tested protective gloves are to be worn: German Industry Norms (DIN) / European Norms (EN): EN 420 Suitable material: CR (polychloroprenes, Chloroprene rubber)., FKM (Fluoroelastomer (Viton)).
Eye protection: Suitable eye protection: Goggles. German Industry Norms (DIN) / European Norms (EN): EN 166 Face protection shield.
Skin protection: For the protection against direct skin contact, body protective clothing is essential (in addition to the usual working clothes). Apron. Boots. chemical resistant suit. (DIN-EN 465)
Environmental exposure controls: Handling and storage. No further action is necessary.
Safe uses can be guaranteed only for the working conditions as mentioned in chapter 10 of the CSR, in combination with the risk management measures mentioned in the table below.
Process Category Exposure time Risk Management Measures (RMMs) to be used, in order to ensure SAFE USE
2 >4 hours Local Exhaust Ventilation (LEV) (90% efficiency) in combination with gloves 1-4 hours Local Exhaust Ventilation (LEV) (90% efficiency) in combination with gloves <15 minutes No requirements
3 >4 hours Exhaust Ventilation (LEV) (90% efficiency) in combination with a half mask PLUS gloves
>15 – 60 min. Local Exhaust Ventilation (LEV) (90% efficiency) or a half mask
15 <15 minutes Local Exhaust Ventilation (LEV) (90% efficiency)
Conditions to avoid: Decomposition takes place from temperatures above: 140°C
Materials to avoid: Alkalis (alkalis), concentrated. acid, concentrated. Oxidizing agents, strong.
Hazardous decomposition products: Formaldehyde. Hydrochloric (HCl). Carbon monoxide. Carbon dioxide (CO2).
Advice on disposal: Waste disposal according to official state regulations. Cleaned containers may be recycled.
Waste disposal number of waste from residues/unused products: 070107
WASTES FROM ORGANIC CHEMICAL PROCESSES; wastes from the manufacture, formulation, supply and use (MFSU) of basic organic chemicals; halogenated still bottoms and reaction residues Classified as hazardous waste.
Waste disposal number of contaminated packaging:070107
WASTES FROM ORGANIC CHEMICAL PROCESSES; wastes from the manufacture, formulation, supply and use (MFSU) of basic organic chemicals; halogenated still bottoms and reaction residues
Classified as hazardous waste
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
På den här webbplatsen används kakor. Syftet är att optimera din upplevelse av den.
Welcome to the ECHA website. This site is not fully supported in Internet Explorer 7 (and earlier versions). Please upgrade your Internet Explorer to a newer version.
Do not show this message again