Registration Dossier
Registration Dossier
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 420-380-5 | CAS number: 136465-81-1
Guidance on Safe Use
Guidance on Safe Use
Administrative data
First-aid measures
The manufacturing/use of the registered substance fulfils strictly controlled conditions. Therefore, no exposure of man or the environment is expected. In the case of accidental exposure, the following measures should be taken (as reported by the Safety Data Sheet):
Eye contact
- rinse immediately with tap water for 10 minutes - open eyelids forcibly
- consult a physician
Skin contact
- remove immediately contaminated clothes, wash affected skin with water and soap - do not use any solvents
Inhalation
- remove the casualty to fresh air and keep him/her calm
- in the event of symptoms get medical treatment
Note to physician
- treat symptomatically
Eye contact
- rinse immediately with tap water for 10 minutes - open eyelids forcibly
- consult a physician
Skin contact
- remove immediately contaminated clothes, wash affected skin with water and soap - do not use any solvents
Inhalation
- remove the casualty to fresh air and keep him/her calm
- in the event of symptoms get medical treatment
Note to physician
- treat symptomatically
Fire-fighting measures
Suitable extinguishing media
- water spray jet, dry powder, foam, carbon dioxide
Specific hazards
- formation of toxic and corrosive combustion gases (nitrogen oxides (NOx)) possible
- consider dust explosion hazard
Protection of fire-fighters
- precipitate gases/vapours/mists with water spray
Special method of fire-fighting
- cool endangered containers with water spray
- water spray jet, dry powder, foam, carbon dioxide
Specific hazards
- formation of toxic and corrosive combustion gases (nitrogen oxides (NOx)) possible
- consider dust explosion hazard
Protection of fire-fighters
- precipitate gases/vapours/mists with water spray
Special method of fire-fighting
- cool endangered containers with water spray
Accidental release measures
The manufacturing/use of the registered substance fulfils strictly controlled conditions. Therefore, no exposure of man or the environment is expected. In the case of accidental exposure, the following measures should be taken (as reported by the Safety Data Sheet):
Environmental protection
- do not allow to enter drains or waterways
Methods for cleaning up
- collect solids (avoid dust formation) and hand over to waste removal
Environmental protection
- do not allow to enter drains or waterways
Methods for cleaning up
- collect solids (avoid dust formation) and hand over to waste removal
Handling and storage
Handling
Technical measures
- processing in closed systems, if possible superposed by inert gas (e.g. nitrogen)
- local exhaust ventilation necessary
- take precautionary measures against electrostatic charging
- avoid dust formation; very high dust explosion hazard
Suitable materials
- steel, stainless steel, glass, enamel, polyethylene
Storage
Storage conditions
- room temperature
Packaging materials
- tightly closing; material: steel, stainless steel
Technical measures
- processing in closed systems, if possible superposed by inert gas (e.g. nitrogen)
- local exhaust ventilation necessary
- take precautionary measures against electrostatic charging
- avoid dust formation; very high dust explosion hazard
Suitable materials
- steel, stainless steel, glass, enamel, polyethylene
Storage
Storage conditions
- room temperature
Packaging materials
- tightly closing; material: steel, stainless steel
Transport information
Land transport (UN RTDG/ADR/RID)
- UN number:
- Not classified by transport regulations.
Shippingopen allclose all
Special provisions / remarks
- Remarks:
- Not classified by transport regulations.
Inland waterway transport (UN RTDG/ADN(R))
- UN number:
- Not classified by transport regulations
Shippingopen allclose all
Special provisions / remarks
- Remarks:
- Not classified by transport regulations.
Marine transport (UN RTDG/IMDG)
- UN number:
- Not classified by transport regulations.
Shippingopen allclose all
Special provisions / remarks
- Remarks:
- Not classified by transport regulations.
Air transport (UN RTDG/ICAO/IATA)
- UN number:
- Not classified by transport regulations.
Shippingopen allclose all
Special provisions / remarks
- Remarks:
- Not classified by transport regulations.
SpecialProvisionsopen allclose all
Exposure controls / personal protection
Engineering Measures
Technical measures
- processing in closed systems, if possible superposed by inert gas (e.g. nitrogen)
- local exhaust ventilation necessary
- take precautionary measures against electrostatic charging
- avoid dust formation; very high dust explosion hazard
Suitable materials
- steel, stainless steel, glass, enamel, polyethylene
Monitoring
Analytics
- sampling on glass fibre filter and gravimetric or chemical determination
Note
- Health Hazard Category (HHC): Category 2, meaning exposures must be controlled to below 10 mcg/m3.
Personal protective equipment
Respiratory protection
- in case of open handling or accidental release: particle mask or respirator with independent air supply
Hand protection
- protective gloves (eg made of neoprene, nitrile or butyl rubber)
Eye protection
- safety glasses
Technical measures
- processing in closed systems, if possible superposed by inert gas (e.g. nitrogen)
- local exhaust ventilation necessary
- take precautionary measures against electrostatic charging
- avoid dust formation; very high dust explosion hazard
Suitable materials
- steel, stainless steel, glass, enamel, polyethylene
Monitoring
Analytics
- sampling on glass fibre filter and gravimetric or chemical determination
Note
- Health Hazard Category (HHC): Category 2, meaning exposures must be controlled to below 10 mcg/m3.
Personal protective equipment
Respiratory protection
- in case of open handling or accidental release: particle mask or respirator with independent air supply
Hand protection
- protective gloves (eg made of neoprene, nitrile or butyl rubber)
Eye protection
- safety glasses
Stability and reactivity
Stability
- stable under normal conditions
Materials to avoid
- strong oxidizing agents, strong acids, strong bases
Hazardous decompositionproducts
- oxides of nitrogen
Note
- hydrolytically stable between pH 4 and 9
- stable under normal conditions
Materials to avoid
- strong oxidizing agents, strong acids, strong bases
Hazardous decompositionproducts
- oxides of nitrogen
Note
- hydrolytically stable between pH 4 and 9
Disposal considerations
Waste from residues
- incinerate in qualified installation with flue gas scrubbing
- observe local/national regulations regarding waste disposal
Contaminated packaging
- empty containers must be triple rinsed prior to disposal, recycling or reuse.
- incinerate in qualified installation with flue gas scrubbing
- observe local/national regulations regarding waste disposal
Contaminated packaging
- empty containers must be triple rinsed prior to disposal, recycling or reuse.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
