Registration Dossier

Data platform availability banner - registered substances factsheets

Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.

The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.

Diss Factsheets

Physical & Chemical properties

Density

Currently viewing:

Administrative data

Link to relevant study record(s)

Referenceopen allclose all

Endpoint:
tap density
Type of information:
experimental study
Adequacy of study:
supporting study
Study period:
August 15, 2017
Reliability:
1 (reliable without restriction)
Rationale for reliability incl. deficiencies:
guideline study
Qualifier:
according to guideline
Guideline:
CIPAC MT 186 (Bulk Density)
Deviations:
no
GLP compliance:
no
Type of method:
pour and tap (for solids)
Key result
Type:
pour density
Density:
0.43 g/cm³
Temp.:
20 °C
Key result
Type:
tap density
Density:
0.58 g/cm³
Temp.:
20 °C
Conclusions:
Calcium titanate has a pour and tap density of 0.43 g/mL and 0.58 g/mL, respectively.
Executive summary:

An experiment was undertaken in line with CIPAC MT 186 (Bulk Density) to obtain the bulk density of calcium titanate. The pour and tap (solids) technique was followed so as to determine the pour and tap density. In conclusion, calcium titanate was found to have a pour density of 0.43 g/mL and tap density of 0.58 g/mL.

Endpoint:
bulk density
Type of information:
experimental study
Adequacy of study:
key study
Study period:
August 4, 2017
Reliability:
1 (reliable without restriction)
Rationale for reliability incl. deficiencies:
guideline study
Qualifier:
according to guideline
Guideline:
OECD Guideline 109 (Density of Liquids and Solids)
Deviations:
no
GLP compliance:
no
Type of method:
pycnometer method
Key result
Type:
bulk density
Density:
4.19 g/cm³
Temp.:
25.3 °C

Density Results

Run  Sample Mass (g) Density (g/cm3) Average Density (g/cm3)
1 2.4259 4.1746 4. 19 ± 0.02
2 2.4309 4.199
Conclusions:
The bulk density of calcium titanium trioxide was found to be 4.19 ± 0.02 g/cm3.
Executive summary:

To ascertain the bulk density of calcium titanium trioxide, an experiment was undertaken using the gas pycnometry technique in line with OECD Guideline 109 (Density of Liquids and Solids). No deviation in the procedure was specified. The average result for the bulk density of calcium titanium trioxide was concluded to be 4.19 ± 0.02 g/cm3.

Description of key information

A pour density of 0.43 g/mL and tap density of 0.58 g/mL was calculated for the bulk density of calcium titanate. The bulk density of calcium titanium trioxide was determined to be 4.19 ± 0.02 g/cm3.

Key value for chemical safety assessment

Relative density at 20C:
4.19

Additional information