Registration Dossier
Registration Dossier
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 947-890-5 | CAS number: -
Flammability
Administrative data
Link to relevant study record(s)
- Endpoint:
- flammable solids
- Type of information:
- read-across based on grouping of substances (category approach)
- Adequacy of study:
- key study
- Study period:
- From October 2009 to March 2010
- Reliability:
- 2 (reliable with restrictions)
- Rationale for reliability incl. deficiencies:
- guideline study
- Remarks:
- Read across study
- Justification for type of information:
- Refer to section 13 of IUCLID for details on the read-across justification.
- Qualifier:
- according to guideline
- Guideline:
- EU Method A.10 (Flammability (Solids))
- Deviations:
- no
- GLP compliance:
- yes (incl. QA statement)
- Interpretation of results:
- non flammable
- Conclusions:
- Under the study conditions, the test substance did not ignite from the flame of the burner. Instead, it was found to melt in the formed path and therefore was not considered highly flammable
- Executive summary:
A study was conducted to determine the flammability of the test substance in accordance with EU Method A.10. In a preliminary study, the substance was formed into an unbroken strip or powder train of about 250 mm long, 20 mm wide and 10 mm high on a non-combustible, non-porous and low heat-conducting base plate. A hot flame from a gas burner (minimum diameter 5 mm) was applied to one end of the powder train until the powder ignited for a maximum of 2 min. Under the study conditions, the test substance did not ignite from the flame of the burner. Instead, it was found to melt in the formed path and therefore was not considered highly flammable (Fraczak, 2010).
Reference
The test substance did not ignite from the flame of the burner in three preliminary tests. Instead, it was found to be melting in the formed path. Therefore, the test substance was not considered to be highly flammable and no further tests were performed.
Description of key information
The flammability was determined according to EU Method A.10 (Fraczak, 2010).
Key value for chemical safety assessment
- Flammability:
- non flammable
Additional information
Value for the read across substance, amides, C8-18 (even numbered) and C18-unsatd., N-(hydroxyethyl).
Justification for classification or non-classification
Based on the results of a guideline study, the test substance is not considered flammable and therefore does not require classification for this endpoint according to CLP (EC 1272/2008) criteria.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
