Registration Dossier
Registration Dossier
Diss Factsheets
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 216-823-5 | CAS number: 1675-54-3
- Life Cycle description
- Uses advised against
- Endpoint summary
- Appearance / physical state / colour
- Melting point / freezing point
- Boiling point
- Density
- Particle size distribution (Granulometry)
- Vapour pressure
- Partition coefficient
- Water solubility
- Solubility in organic solvents / fat solubility
- Surface tension
- Flash point
- Auto flammability
- Flammability
- Explosiveness
- Oxidising properties
- Oxidation reduction potential
- Stability in organic solvents and identity of relevant degradation products
- Storage stability and reactivity towards container material
- Stability: thermal, sunlight, metals
- pH
- Dissociation constant
- Viscosity
- Additional physico-chemical information
- Additional physico-chemical properties of nanomaterials
- Nanomaterial agglomeration / aggregation
- Nanomaterial crystalline phase
- Nanomaterial crystallite and grain size
- Nanomaterial aspect ratio / shape
- Nanomaterial specific surface area
- Nanomaterial Zeta potential
- Nanomaterial surface chemistry
- Nanomaterial dustiness
- Nanomaterial porosity
- Nanomaterial pour density
- Nanomaterial photocatalytic activity
- Nanomaterial radical formation potential
- Nanomaterial catalytic activity
- Endpoint summary
- Stability
- Biodegradation
- Bioaccumulation
- Transport and distribution
- Environmental data
- Additional information on environmental fate and behaviour
- Ecotoxicological Summary
- Aquatic toxicity
- Endpoint summary
- Short-term toxicity to fish
- Long-term toxicity to fish
- Short-term toxicity to aquatic invertebrates
- Long-term toxicity to aquatic invertebrates
- Toxicity to aquatic algae and cyanobacteria
- Toxicity to aquatic plants other than algae
- Toxicity to microorganisms
- Endocrine disrupter testing in aquatic vertebrates – in vivo
- Toxicity to other aquatic organisms
- Sediment toxicity
- Terrestrial toxicity
- Biological effects monitoring
- Biotransformation and kinetics
- Additional ecotoxological information
- Toxicological Summary
- Toxicokinetics, metabolism and distribution
- Acute Toxicity
- Irritation / corrosion
- Sensitisation
- Repeated dose toxicity
- Genetic toxicity
- Carcinogenicity
- Toxicity to reproduction
- Specific investigations
- Exposure related observations in humans
- Toxic effects on livestock and pets
- Additional toxicological data

Uses by professional workers
Documentsopen allclose all
Uses by professional workers
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environmentopen allclose all
- Environmental release category (ERC):
- ERC8c: Widespread use leading to inclusion into/onto article (indoor)
- Environmental release category (ERC):
- ERC8f: Widespread use leading to inclusion into/onto article (outdoor)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 11: Non industrial spraying
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Process category (PROC):
- PROC 19: Hand-mixing with intimate contact and only PPE available.
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant to this use:
- no
- Related assessment:
- use assessed in a joint CSR
Uses by professional workers
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC8c: Widespread use leading to inclusion into/onto article (indoor)
- ERC8f: Widespread use leading to inclusion into/onto article (outdoor)
Contributing activity / technique for workers
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 10: Roller application or brushing
- PROC 11: Non industrial spraying
- PROC 13: Treatment of articles by dipping and pouring
- PROC 19: Hand-mixing with intimate contact and only PPE available.
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Sector of end use:
- SU 0: Other: Use for adhesives, lubrication, soldering, moulding or processing aids in various industry sectors
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant to this use:
- no
Uses by professional workers
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environmentopen allclose all
- Name of activity / technique:
- Professional application of coatings and inks
- Environmental release category (ERC):
- ERC8c: Widespread use leading to inclusion into/onto article (indoor)
- Name of activity / technique:
- Professional application of coatings and inks
- Environmental release category (ERC):
- ERC8f: Widespread use leading to inclusion into/onto article (outdoor)
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- Mixing operations
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- Bulk transfers; Non-dedicated facility
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- Bulk transfers; Dedicated facility
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- Rolling, Brushing
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- Professional application of coatings and inks by spraying
- Process category (PROC):
- PROC 11: Non industrial spraying
- Name of activity / technique:
- Dipping, immersion and pouring
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Name of activity / technique:
- Laboratory activities
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Name of activity / technique:
- Manual activities involving hand contact
- Process category (PROC):
- PROC 19: Hand-mixing with intimate contact and only PPE available.
- Product category used:
- PC 1: Adhesives, sealants
- PC 9a: Coatings and paints, thinners, paint removes
- Subsequent service life relevant to this use:
- no
- Related assessment:
- use assessed in an own CSR
ContribScenEnvirWorkerRepopen allclose all
Contributing scenario for the environment (related to workers activities)
Conditions of use for the environment
Amounts used, frequency and duration of use (or from service life)
Other conditions
Conditions and measures related to Biological Sewage Treatment Plant
- Biological Sewage Treatment Plant (STP):
- municipal biological STP
Releases to waste and the environment
Release to the environment
ReleaseEnvirRepopen allclose all
- Release from the site to::
- wastewater
- Release estimation method:
- ERC
- Release from the site to::
- ambient air
- Release estimation method:
- ERC
- Release from the site to::
- non-agricultural soil
- Release estimation method:
- ERC
Exposure of the environment
PECopen allclose all
- Exposed compartment:
- freshwater
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- sediment (freshwater)
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- marine water
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- sediment (marine water)
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- sewage treatment plant
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- air
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- agricultural soil
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- predators' prey (freshwater)
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- predators' prey (marine water)
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- top predators' prey (marine water)
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- predators' prey (terrestrial)
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
Exposure of humans via the environment
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
Contributing scenario for the environment (related to workers activities)
Conditions of use for the environment
Amounts used, frequency and duration of use (or from service life)
Other conditions
Conditions and measures related to Biological Sewage Treatment Plant
- Biological Sewage Treatment Plant (STP):
- municipal biological STP
Releases to waste and the environment
Release to the environment
ReleaseEnvirRepopen allclose all
- Release from the site to::
- wastewater
- Release estimation method:
- ERC
- Release from the site to::
- ambient air
- Release estimation method:
- ERC
- Release from the site to::
- non-agricultural soil
- Release estimation method:
- ERC
Exposure of the environment
PECopen allclose all
- Exposed compartment:
- freshwater
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- sediment (freshwater)
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- marine water
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- sediment (marine water)
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- sewage treatment plant
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- air
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- agricultural soil
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- predators' prey (freshwater)
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- predators' prey (marine water)
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- top predators' prey (marine water)
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- predators' prey (terrestrial)
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
Exposure of humans via the environment
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
ContribScenWorkersRepopen allclose all
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
Amounts used (or contained in articles), frequency and duration of use/exposure
Technical and organisational conditions and measures
Technical and organisational conditions
Effectiveness
- Route affected:
- inhalation
Other conditions affecting workers exposure
- Place of use:
- indoor
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
Amounts used (or contained in articles), frequency and duration of use/exposure
Technical and organisational conditions and measures
Technical and organisational conditions
Effectiveness
- Route affected:
- inhalation
Other conditions affecting workers exposure
- Place of use:
- indoor
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
Amounts used (or contained in articles), frequency and duration of use/exposure
Technical and organisational conditions and measures
Technical and organisational conditions
Effectiveness
- Route affected:
- inhalation
Other conditions affecting workers exposure
- Place of use:
- indoor
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
Amounts used (or contained in articles), frequency and duration of use/exposure
Technical and organisational conditions and measures
Technical and organisational conditions
Effectiveness
- Route affected:
- inhalation
Other conditions affecting workers exposure
- Place of use:
- indoor
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
Amounts used (or contained in articles), frequency and duration of use/exposure
Technical and organisational conditions and measures
Technical and organisational conditions
Effectiveness
- Route affected:
- inhalation
Other conditions affecting workers exposure
- Place of use:
- indoor
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
Amounts used (or contained in articles), frequency and duration of use/exposure
Technical and organisational conditions and measures
Technical and organisational conditions
Effectiveness
- Route affected:
- inhalation
Other conditions affecting workers exposure
- Place of use:
- indoor
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
Amounts used (or contained in articles), frequency and duration of use/exposure
Technical and organisational conditions and measures
Technical and organisational conditions
Effectiveness
- Route affected:
- inhalation
Other conditions affecting workers exposure
- Place of use:
- indoor
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
Amounts used (or contained in articles), frequency and duration of use/exposure
Technical and organisational conditions and measures
Technical and organisational conditions
Effectiveness
- Route affected:
- inhalation
Other conditions affecting workers exposure
- Place of use:
- indoor
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
Amounts used (or contained in articles), frequency and duration of use/exposure
Technical and organisational conditions and measures
Technical and organisational conditions
Effectiveness
- Route affected:
- inhalation
Other conditions affecting workers exposure
- Place of use:
- indoor
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
Amounts used (or contained in articles), frequency and duration of use/exposure
Technical and organisational conditions and measures
Technical and organisational conditions
Effectiveness
- Route affected:
- inhalation
Other conditions affecting workers exposure
- Place of use:
- indoor
Uses by professional workers
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC8c: Widespread use leading to inclusion into/onto article (indoor)
- ERC8f: Widespread use leading to inclusion into/onto article (outdoor)
Contributing activity / technique for workers
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- PROC 13: Treatment of articles by dipping and pouring
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant to this use:
- no
- Insignificant exposure via the following route:
- oral
- dermal
- eye
- inhalatory
- Insignificant release via the following route:
- water
- air
- soil
- waste
- Pattern of exposure:
- accidental / infrequent
Uses by professional workers
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
- Type of composition:
- legal entity composition of the substance
- State / form:
- liquid
- Environmental release category (ERC):
- ERC8c: Widespread use leading to inclusion into/onto article (indoor)
- Environmental release category (ERC):
- ERC8f: Widespread use leading to inclusion into/onto article (outdoor)
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 11: Non industrial spraying
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 19: Hand-mixing with intimate contact and only PPE available.
- Process category (PROC):
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant to this use:
- no
- Related assessment:
- use assessed in a joint CSR
Reference
Contributing activity / technique for the environmentopen allclose all
Contributing activity / technique for workersopen allclose all
Uses by professional workers
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC8c: Widespread use leading to inclusion into/onto article (indoor)
- ERC8f: Widespread use leading to inclusion into/onto article (outdoor)
Contributing activity / technique for workers
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 10: Roller application or brushing
- PROC 11: Non industrial spraying
- PROC 13: Treatment of articles by dipping and pouring
- PROC 15: Use as laboratory reagent
- PROC 19: Hand-mixing with intimate contact and only PPE available.
- Product category used:
- PC 1: Adhesives, sealants
- PC 9a: Coatings and paints, thinners, paint removes
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant to this use:
- no
- Related assessment:
- use assessed in a joint CSR
Uses by professional workers
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC8c: Widespread use leading to inclusion into/onto article (indoor)
Contributing activity / technique for workers
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- PROC 7: Industrial spraying
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 10: Roller application or brushing
- PROC 13: Treatment of articles by dipping and pouring
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant to this use:
- yes
- Related assessment:
- use assessed in a joint CSR
Uses by professional workers
- Name:
- 2,2'-[propane-2,2-diylbis(4,1-phenyleneoxymethylene)]dioxirane (BADGE)
- Type of composition:
- legal entity composition of the substance
- State / form:
- liquid
- Reference substance:
- 2,2'-[propane-2,2-diylbis(4,1-phenyleneoxymethylene)]dioxirane (BADGE)
- Reference substance:
- 2,2'-[propane-2,2-diylbis(4,1-phenyleneoxymethylene)]dioxirane (BADGE)
- Name:
- Boundary composition: 2,2'-[propane-2,2-diylbis(4,1-phenyleneoxymethylene)]dioxirane (BADGE)
- Type of composition:
- legal entity composition of the substance
- State / form:
- liquid
- Reference substance:
- Boundary composition: 2,2'-[propane-2,2-diylbis(4,1-phenyleneoxymethylene)]dioxirane (BADGE)
- Reference substance:
- Boundary composition: 2,2'-[propane-2,2-diylbis(4,1-phenyleneoxymethylene)]dioxirane (BADGE)
- Environmental release category (ERC):
- ERC8c: Widespread use leading to inclusion into/onto article (indoor)
- Environmental release category (ERC):
- ERC8f: Widespread use leading to inclusion into/onto article (outdoor)
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 11: Non industrial spraying
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 19: Hand-mixing with intimate contact and only PPE available.
- Process category (PROC):
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant to this use:
- no
Referenceopen allclose all
Contributing activity / technique for the environmentopen allclose all
Contributing activity / technique for workersopen allclose all
Uses by professional workers
- Name:
- BADGE - new substance ID _ENSA / 2,2'-[propane-2,2-diylbis(4,1-
phenyleneoxymethylene)]dioxirane (BADGE) / 1675 -54-3 - Type of composition:
- legal entity composition of the substance
- State / form:
- liquid
- Related composition:
- Boundary composition: 2,2'-[propane-2,2-diylbis(4,1-phenyleneoxymethylene)]dioxirane (BADGE)
- Reference substance:
- BADGE - new substance ID _ENSA / 2,2'-[propane-2,2-diylbis(4,1- phenyleneoxymethylene)]dioxirane (BADGE) / 1675 -54-3
- Reference substance:
- BADGE - new substance ID _ENSA / 2,2'-[propane-2,2-diylbis(4,1- phenyleneoxymethylene)]dioxirane (BADGE) / 1675 -54-3
- Name of activity / technique:
- Professional use
- Environmental release category (ERC):
- ERC8c: Widespread use leading to inclusion into/onto article (indoor)
- Environmental release category (ERC):
- ERC8f: Widespread use leading to inclusion into/onto article (outdoor)
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 11: Non industrial spraying
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 19: Hand-mixing with intimate contact and only PPE available.
- Process category (PROC):
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant to this use:
- no
Reference
Contributing activity / technique for the environmentopen allclose all
Contributing activity / technique for workersopen allclose all
Uses by professional workers
Contributing activity / technique for the environmentopen allclose all
- Environmental release category (ERC):
- ERC8a: Widespread use of non-reactive processing aid (no inclusion into or onto article, indoor)
- ERC8c: Widespread use leading to inclusion into/onto article (indoor)
- Environmental release category (ERC):
- ERC8f: Widespread use leading to inclusion into/onto article (outdoor)
Contributing activity / technique for workers
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- PROC 0: Other: Processing operations at elevated temperature (ca 130°C)
- Product category used:
- PC 0: Other: fluids transfer
- Sector of end use:
- SU 0: Other: Manufacture of pipes
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant to this use:
- no
Uses by professional workers
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported <10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- Professional Applications
- Environmental release category (ERC):
- ERC8c: Widespread use leading to inclusion into/onto article (indoor)
- ERC8f: Widespread use leading to inclusion into/onto article (outdoor)
Contributing activity / technique for workers
- Name of activity / technique:
- Professional Applications
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- PROC 13: Treatment of articles by dipping and pouring
- Product category used:
- PC 1: Adhesives, sealants
- PC 9a: Coatings and paints, thinners, paint removes
- PC 9b: Fillers, putties, plasters, modelling clay
- PC 32: Polymer preparations and compounds
- Sector of end use:
- SU 17: General manufacturing, e.g. machinery, equipment, vehicles, other transport equipment
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant to this use:
- yes
Uses by professional workers
Contributing activity / technique for the environmentopen allclose all
- Name of activity / technique:
- Professional application of coatings and inks
- Environmental release category (ERC):
- ERC8c: Widespread use leading to inclusion into/onto article (indoor)
- Name of activity / technique:
- Professional application of coatings and inks
- Environmental release category (ERC):
- ERC8f: Widespread use leading to inclusion into/onto article (outdoor)
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- Mixing operations
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- Bulk transfers; Non-dedicated facility
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- Bulk transfers; Dedicated facility
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- Rolling, Brushing
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- Professional application of coatings and inks by spraying
- Process category (PROC):
- PROC 11: Non industrial spraying
- Name of activity / technique:
- Dipping, immersion and pouring
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Name of activity / technique:
- Laboratory activities
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Name of activity / technique:
- Manual activities involving hand contact
- Process category (PROC):
- PROC 19: Hand-mixing with intimate contact and only PPE available.
- Product category used:
- PC 1: Adhesives, sealants
- PC 9a: Coatings and paints, thinners, paint removes
- Subsequent service life relevant to this use:
- no
- Related assessment:
- use assessed in a joint CSR
Uses by professional workers
Contributing activity / technique for the environmentopen allclose all
- Environmental release category (ERC):
- ERC8c: Widespread use leading to inclusion into/onto article (indoor)
- Environmental release category (ERC):
- ERC8f: Widespread use leading to inclusion into/onto article (outdoor)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 11: Non industrial spraying
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 19: Hand-mixing with intimate contact and only PPE available.
- Process category (PROC):
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Product category used:
- PC 9a: Coatings and paints, thinners, paint removes
- Sector of end use:
- SU 17: General manufacturing, e.g. machinery, equipment, vehicles, other transport equipment
- SU 19: Building and construction work
- SU 0: Other: Use in coatings products for corrosion inhibition
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant to this use:
- no
- Related assessment:
- use assessed in an own CSR
Uses by professional workers
Contributing activity / technique for the environmentopen allclose all
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
- Environmental release category (ERC):
- ERC6a: Use of intermediate
- Environmental release category (ERC):
- ERC8c: Widespread use leading to inclusion into/onto article (indoor)
- Environmental release category (ERC):
- ERC8f: Widespread use leading to inclusion into/onto article (outdoor)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 6: Calendering operations
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 11: Non industrial spraying
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Process category (PROC):
- PROC 19: Hand-mixing with intimate contact and only PPE available.
- Process category (PROC):
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Product category used:
- PC 1: Adhesives, sealants
- PC 9b: Fillers, putties, plasters, modelling clay
- PC 32: Polymer preparations and compounds
- PC 33: Semiconductors
- Sector of end use:
- SU 12: Manufacture of plastics products, including compounding and conversion
- SU 16: Manufacture of computer, electronic and optical products, electrical equipment
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant to this use:
- no
Uses by professional workers
Contributing activity / technique for the environmentopen allclose all
- Environmental release category (ERC):
- ERC2: Formulation into mixture
- Environmental release category (ERC):
- ERC6a: Use of intermediate
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Product category used:
- PC 19: Intermediate
- PC 32: Polymer preparations and compounds
- Sector of end use:
- SU 10: Formulation [mixing] of preparations and/or re-packaging (excluding alloys)
- SU 19: Building and construction work
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant to this use:
- no
Uses by professional workers
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
- Name:
- 2,2'-[propane-2,2-diylbis(4,1-phenyleneoxymethylene)]dioxirane (BADGE)
- Type of composition:
- legal entity composition of the substance
- State / form:
- liquid
- Reference substance:
- 2,2'-[propane-2,2-diylbis(4,1-phenyleneoxymethylene)]dioxirane (BADGE)
- Reference substance:
- 2,2'-[propane-2,2-diylbis(4,1-phenyleneoxymethylene)]dioxirane (BADGE)
- Name of activity / technique:
- Professional coatings applications (indoor)
- Environmental release category (ERC):
- ERC8b: Widespread use of reactive processing aid (no inclusion into or onto article, indoor)
- Name of activity / technique:
- Professional coatings applications (outdoor)
- Environmental release category (ERC):
- ERC8e: Widespread use of reactive processing aid (no inclusion into or onto article, outdoor)
- Name of activity / technique:
- Professional coatings applications
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Professional coatings applications
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Professional coatings applications
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Professional coatings applications
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- Professional coatings applications
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- Professional coatings applications
- Process category (PROC):
- PROC 6: Calendering operations
- Name of activity / technique:
- Professional coatings applications
- Process category (PROC):
- PROC 7: Industrial spraying
- Name of activity / technique:
- Professional coatings applications
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- Professional coatings applications
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- Professional coatings applications
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Name of activity / technique:
- Professional coatings applications
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- Professional coatings applications
- Process category (PROC):
- PROC 11: Non industrial spraying
- Name of activity / technique:
- Professional coatings applications
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Name of activity / technique:
- Professional coatings applications
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Name of activity / technique:
- Professional coatings applications
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Name of activity / technique:
- Professional coatings applications
- Process category (PROC):
- PROC 19: Hand-mixing with intimate contact and only PPE available.
- Name of activity / technique:
- Professional coatings applications
- Process category (PROC):
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Product category used:
- PC 9a: Coatings and paints, thinners, paint removes
- Sector of end use:
- SU 17: General manufacturing, e.g. machinery, equipment, vehicles, other transport equipment
- Subsequent service life relevant to this use:
- no
- Related assessment:
- use assessed in an own CSR
- Biological Sewage Treatment Plant (STP):
- municipal biological STP
- Release from the site to::
- wastewater
- Release estimation method:
- estimated release factor
- Release from the site to::
- ambient air
- Release estimation method:
- estimated release factor
- Release from the site to::
- non-agricultural soil
- Release estimation method:
- estimated release factor
- Exposed compartment:
- freshwater
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- sediment (freshwater)
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- marine water
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- sediment (marine water)
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- sewage treatment plant
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- air
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- agricultural soil
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- predators' prey (freshwater)
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- predators' prey (marine water)
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- top predators' prey (marine water)
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- predators' prey (terrestrial)
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Biological Sewage Treatment Plant (STP):
- municipal biological STP
- Release from the site to::
- wastewater
- Release estimation method:
- estimated release factor
- Release from the site to::
- ambient air
- Release estimation method:
- estimated release factor
- Release from the site to::
- non-agricultural soil
- Release estimation method:
- estimated release factor
- Exposed compartment:
- freshwater
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- sediment (freshwater)
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- marine water
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- sediment (marine water)
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- sewage treatment plant
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- air
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- agricultural soil
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- predators' prey (freshwater)
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- predators' prey (marine water)
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- top predators' prey (marine water)
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- predators' prey (terrestrial)
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Physical form of the used product:
- liquid, including paste/slurry/suspension
- Place of use:
- indoor
- Physical form of the used product:
- liquid, including paste/slurry/suspension
- Place of use:
- indoor
- Physical form of the used product:
- liquid, including paste/slurry/suspension
- Place of use:
- indoor
- Physical form of the used product:
- liquid, including paste/slurry/suspension
- Place of use:
- indoor
- Physical form of the used product:
- liquid, including paste/slurry/suspension
- Place of use:
- indoor
- Physical form of the used product:
- liquid, including paste/slurry/suspension
- Place of use:
- indoor
- Physical form of the used product:
- liquid, including paste/slurry/suspension
- Place of use:
- indoor
- Physical form of the used product:
- liquid, including paste/slurry/suspension
- Place of use:
- indoor
- Physical form of the used product:
- liquid, including paste/slurry/suspension
- Place of use:
- indoor
- Physical form of the used product:
- liquid, including paste/slurry/suspension
- Place of use:
- indoor
- Physical form of the used product:
- liquid, including paste/slurry/suspension
- Place of use:
- indoor
- Physical form of the used product:
- liquid, including paste/slurry/suspension
- Place of use:
- indoor
- Physical form of the used product:
- liquid, including paste/slurry/suspension
- Place of use:
- indoor
- Physical form of the used product:
- liquid, including paste/slurry/suspension
- Place of use:
- indoor
- Physical form of the used product:
- liquid, including paste/slurry/suspension
- Place of use:
- indoor
- Physical form of the used product:
- liquid, including paste/slurry/suspension
- Place of use:
- indoor
- Physical form of the used product:
- liquid, including paste/slurry/suspension
- Place of use:
- indoor
Reference
Contributing activity / technique for the environmentopen allclose all
Contributing activity / technique for workersopen allclose all
ContribScenEnvirWorkerRepopen allclose all
Contributing scenario for the environment (related to workers activities)
Conditions of use for the environment
Amounts used, frequency and duration of use (or from service life)
Other conditions
Conditions and measures related to Biological Sewage Treatment Plant
Releases to waste and the environment
Release to the environment
ReleaseEnvirRepopen allclose all
Release to external waste
Exposure of the environment
PECopen allclose all
Exposure of humans via the environment
Contributing scenario for the environment (related to workers activities)
Conditions of use for the environment
Amounts used, frequency and duration of use (or from service life)
Other conditions
Conditions and measures related to Biological Sewage Treatment Plant
Releases to waste and the environment
Release to the environment
ReleaseEnvirRepopen allclose all
Release to external waste
Exposure of the environment
PECopen allclose all
Exposure of humans via the environment
ContribScenWorkersRepopen allclose all
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
Amounts used (or contained in articles), frequency and duration of use/exposure
Technical and organisational conditions and measures
TechCondRepopen allclose all
Conditions and measures related to personal protection, hygiene and health evaluation
PPERepopen allclose all
Other conditions affecting workers exposure
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
Amounts used (or contained in articles), frequency and duration of use/exposure
Technical and organisational conditions and measures
TechCondRepopen allclose all
Conditions and measures related to personal protection, hygiene and health evaluation
PPERepopen allclose all
Other conditions affecting workers exposure
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
Amounts used (or contained in articles), frequency and duration of use/exposure
Technical and organisational conditions and measures
TechCondRepopen allclose all
Conditions and measures related to personal protection, hygiene and health evaluation
PPERepopen allclose all
Other conditions affecting workers exposure
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
Amounts used (or contained in articles), frequency and duration of use/exposure
Technical and organisational conditions and measures
TechCondRepopen allclose all
Conditions and measures related to personal protection, hygiene and health evaluation
PPERepopen allclose all
Other conditions affecting workers exposure
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
Amounts used (or contained in articles), frequency and duration of use/exposure
Technical and organisational conditions and measures
TechCondRepopen allclose all
Conditions and measures related to personal protection, hygiene and health evaluation
PPERepopen allclose all
Other conditions affecting workers exposure
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
Amounts used (or contained in articles), frequency and duration of use/exposure
Technical and organisational conditions and measures
TechCondRepopen allclose all
Conditions and measures related to personal protection, hygiene and health evaluation
PPERepopen allclose all
Other conditions affecting workers exposure
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
Amounts used (or contained in articles), frequency and duration of use/exposure
Technical and organisational conditions and measures
TechCondRepopen allclose all
Conditions and measures related to personal protection, hygiene and health evaluation
PPERepopen allclose all
Other conditions affecting workers exposure
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
Amounts used (or contained in articles), frequency and duration of use/exposure
Technical and organisational conditions and measures
TechCondRepopen allclose all
Conditions and measures related to personal protection, hygiene and health evaluation
PPERepopen allclose all
Other conditions affecting workers exposure
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
Amounts used (or contained in articles), frequency and duration of use/exposure
Technical and organisational conditions and measures
TechCondRepopen allclose all
Conditions and measures related to personal protection, hygiene and health evaluation
PPERepopen allclose all
Other conditions affecting workers exposure
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
Amounts used (or contained in articles), frequency and duration of use/exposure
Technical and organisational conditions and measures
TechCondRepopen allclose all
Conditions and measures related to personal protection, hygiene and health evaluation
PPERepopen allclose all
Other conditions affecting workers exposure
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
Amounts used (or contained in articles), frequency and duration of use/exposure
Technical and organisational conditions and measures
TechCondRepopen allclose all
Conditions and measures related to personal protection, hygiene and health evaluation
PPERepopen allclose all
Other conditions affecting workers exposure
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
Amounts used (or contained in articles), frequency and duration of use/exposure
Technical and organisational conditions and measures
TechCondRepopen allclose all
Conditions and measures related to personal protection, hygiene and health evaluation
PPERepopen allclose all
Other conditions affecting workers exposure
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
Amounts used (or contained in articles), frequency and duration of use/exposure
Technical and organisational conditions and measures
TechCondRepopen allclose all
Conditions and measures related to personal protection, hygiene and health evaluation
PPERepopen allclose all
Other conditions affecting workers exposure
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
Amounts used (or contained in articles), frequency and duration of use/exposure
Technical and organisational conditions and measures
TechCondRepopen allclose all
Conditions and measures related to personal protection, hygiene and health evaluation
PPERepopen allclose all
Other conditions affecting workers exposure
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
Amounts used (or contained in articles), frequency and duration of use/exposure
Technical and organisational conditions and measures
TechCondRepopen allclose all
Conditions and measures related to personal protection, hygiene and health evaluation
PPERepopen allclose all
Other conditions affecting workers exposure
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
Amounts used (or contained in articles), frequency and duration of use/exposure
Technical and organisational conditions and measures
TechCondRepopen allclose all
Conditions and measures related to personal protection, hygiene and health evaluation
PPERepopen allclose all
Other conditions affecting workers exposure
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
Amounts used (or contained in articles), frequency and duration of use/exposure
Technical and organisational conditions and measures
TechCondRepopen allclose all
Conditions and measures related to personal protection, hygiene and health evaluation
PPERepopen allclose all
Other conditions affecting workers exposure
Uses by professional workers
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported <10tonnes/year per registrant
Contributing activity / technique for the environmentopen allclose all
- Environmental release category (ERC):
- ERC8a: Widespread use of non-reactive processing aid (no inclusion into or onto article, indoor)
- Environmental release category (ERC):
- ERC8b: Widespread use of reactive processing aid (no inclusion into or onto article, indoor)
- Environmental release category (ERC):
- ERC8d: Widespread use of non-reactive processing aid (no inclusion into or onto article, outdoor)
- Environmental release category (ERC):
- ERC8e: Widespread use of reactive processing aid (no inclusion into or onto article, outdoor)
- Environmental release category (ERC):
- ERC9a: Widespread use of functional fluid (indoor)
- Environmental release category (ERC):
- ERC9b: Widespread use of functional fluid (outdoor)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 11: Non industrial spraying
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Process category (PROC):
- PROC 19: Hand-mixing with intimate contact and only PPE available.
- Process category (PROC):
- PROC 20: Use of functional fluids in small devices
- Process category (PROC):
- PROC28: Manual maintenance (cleaning and repair) of machinery
- Subsequent service life relevant to this use:
- no
Uses by professional workers
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC8c: Widespread use leading to inclusion into/onto article (indoor)
- ERC8f: Widespread use leading to inclusion into/onto article (outdoor)
Contributing activity / technique for workers
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 10: Roller application or brushing
- PROC 11: Non industrial spraying
- PROC 13: Treatment of articles by dipping and pouring
- PROC 15: Use as laboratory reagent
- PROC 19: Hand-mixing with intimate contact and only PPE available.
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant to this use:
- yes
Uses by professional workers
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC8c: Widespread use leading to inclusion into/onto article (indoor)
- ERC8f: Widespread use leading to inclusion into/onto article (outdoor)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 11: Non industrial spraying
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Process category (PROC):
- PROC 19: Hand-mixing with intimate contact and only PPE available.
- Product category used:
- PC 1: Adhesives, sealants
- PC 9a: Coatings and paints, thinners, paint removes
- Sector of end use:
- SU 17: General manufacturing, e.g. machinery, equipment, vehicles, other transport equipment
- SU 19: Building and construction work
- SU 0: Other: Use in coatings products for corrosion inhibition
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant to this use:
- no
- Related assessment:
- use assessed in a joint CSR
Uses by professional workers
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environmentopen allclose all
- Name of activity / technique:
- Professional application of coatings and inks
- Environmental release category (ERC):
- ERC8c: Widespread use leading to inclusion into/onto article (indoor)
- Name of activity / technique:
- Professional application of coatings and inks
- Environmental release category (ERC):
- ERC8f: Widespread use leading to inclusion into/onto article (outdoor)
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- Mixing operations
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- Bulk transfers; Non-dedicated facility
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- Bulk transfers; Dedicated facility
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- Rolling, Brushing
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- Professional application of coatings and inks by spraying
- Process category (PROC):
- PROC 11: Non industrial spraying
- Name of activity / technique:
- Dipping, immersion and pouring
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Name of activity / technique:
- Laboratory activities
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Name of activity / technique:
- Manual activities involving hand contact
- Process category (PROC):
- PROC 19: Hand-mixing with intimate contact and only PPE available.
- Product category used:
- PC 1: Adhesives, sealants
- PC 9a: Coatings and paints, thinners, paint removes
- Subsequent service life relevant to this use:
- no
- Related assessment:
- use assessed in an own CSR
Uses by professional workers
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC8c: Widespread use leading to inclusion into/onto article (indoor)
- ERC8f: Widespread use leading to inclusion into/onto article (outdoor)
Contributing activity / technique for workers
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 10: Roller application or brushing
- PROC 11: Non industrial spraying
- PROC 13: Treatment of articles by dipping and pouring
- PROC 15: Use as laboratory reagent
- PROC 19: Hand-mixing with intimate contact and only PPE available.
- Sector of end use:
- SU 0: Other: Use for adhesives, lubrication, soldering, moulding or processing aids in various industry sectors
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant to this use:
- yes
Uses by professional workers
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC8c: Widespread use leading to inclusion into/onto article (indoor)
- ERC8f: Widespread use leading to inclusion into/onto article (outdoor)
Contributing activity / technique for workers
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant to this use:
- yes
Uses by professional workers
Contributing activity / technique for the environmentopen allclose all
- Environmental release category (ERC):
- ERC8c: Widespread use leading to inclusion into/onto article (indoor)
- Environmental release category (ERC):
- ERC8f: Widespread use leading to inclusion into/onto article (outdoor)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 11: Non industrial spraying
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 19: Hand-mixing with intimate contact and only PPE available.
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant to this use:
- no
- Related assessment:
- use assessed in a joint CSR
Uses by professional workers
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported <10tonnes/year per registrant
Contributing activity / technique for the environmentopen allclose all
- Environmental release category (ERC):
- ERC8c: Widespread use leading to inclusion into/onto article (indoor)
- Environmental release category (ERC):
- ERC8f: Widespread use leading to inclusion into/onto article (outdoor)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 11: Non industrial spraying
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Process category (PROC):
- PROC 20: Use of functional fluids in small devices
- Subsequent service life relevant to this use:
- no
Uses by professional workers
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC8c: Widespread use leading to inclusion into/onto article (indoor)
- ERC8f: Widespread use leading to inclusion into/onto article (outdoor)
Contributing activity / technique for workers
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 10: Roller application or brushing
- PROC 11: Non industrial spraying
- PROC 13: Treatment of articles by dipping and pouring
- PROC 19: Hand-mixing with intimate contact and only PPE available.
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Product category used:
- PC 32: Polymer preparations and compounds
- Sector of end use:
- SU 17: General manufacturing, e.g. machinery, equipment, vehicles, other transport equipment
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant to this use:
- no
Uses by professional workers
Contributing activity / technique for the environmentopen allclose all
- Environmental release category (ERC):
- ERC8c: Widespread use leading to inclusion into/onto article (indoor)
- Environmental release category (ERC):
- ERC8f: Widespread use leading to inclusion into/onto article (outdoor)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 11: Non industrial spraying
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 19: Hand-mixing with intimate contact and only PPE available.
- Process category (PROC):
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant to this use:
- no
- Related assessment:
- use assessed in a joint CSR
Uses by professional workers
Contributing activity / technique for the environmentopen allclose all
- Environmental release category (ERC):
- ERC8c: Widespread use leading to inclusion into/onto article (indoor)
- Environmental release category (ERC):
- ERC8f: Widespread use leading to inclusion into/onto article (outdoor)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 6: Calendering operations
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 11: Non industrial spraying
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Process category (PROC):
- PROC 19: Hand-mixing with intimate contact and only PPE available.
- Process category (PROC):
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Product category used:
- PC 1: Adhesives, sealants
- PC 9b: Fillers, putties, plasters, modelling clay
- PC 32: Polymer preparations and compounds
- PC 33: Semiconductors
- Sector of end use:
- SU 12: Manufacture of plastics products, including compounding and conversion
- SU 16: Manufacture of computer, electronic and optical products, electrical equipment
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant to this use:
- no
- Related assessment:
- use assessed in an own CSR
Uses by professional workers
Contributing activity / technique for the environmentopen allclose all
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
- Environmental release category (ERC):
- ERC6a: Use of intermediate
- Environmental release category (ERC):
- ERC8c: Widespread use leading to inclusion into/onto article (indoor)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 7: Industrial spraying
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 11: Non industrial spraying
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 19: Hand-mixing with intimate contact and only PPE available.
- Process category (PROC):
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Product category used:
- PC 9a: Coatings and paints, thinners, paint removes
- Sector of end use:
- SU 17: General manufacturing, e.g. machinery, equipment, vehicles, other transport equipment
- SU 19: Building and construction work
- SU 0: Other: SU17: Use in coatings products for corrosion inhibition
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant to this use:
- no
Uses by professional workers
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
- Name:
- 2,2'-[propane-2,2-diylbis(4,1-phenyleneoxymethylene)]dioxirane (BADGE)
- Type of composition:
- legal entity composition of the substance
- State / form:
- liquid
- Reference substance:
- 2,2'-[propane-2,2-diylbis(4,1-phenyleneoxymethylene)]dioxirane (BADGE)
- Reference substance:
- 2,2'-[propane-2,2-diylbis(4,1-phenyleneoxymethylene)]dioxirane (BADGE)
- Name of activity / technique:
- Professional castings applications
- Environmental release category (ERC):
- ERC8b: Widespread use of reactive processing aid (no inclusion into or onto article, indoor)
- Name of activity / technique:
- Professional castings applications
- Environmental release category (ERC):
- ERC8e: Widespread use of reactive processing aid (no inclusion into or onto article, outdoor)
- Name of activity / technique:
- Professional castings applications
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Professional castings applications
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Professional castings applications
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- Professional castings applications
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Professional castings applications
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- Professional castings applications
- Process category (PROC):
- PROC 6: Calendering operations
- Name of activity / technique:
- Professional castings applications
- Process category (PROC):
- PROC 7: Industrial spraying
- Name of activity / technique:
- Professional castings applications
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- Professional castings applications
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- Professional castings applications
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Name of activity / technique:
- Professional castings applications
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- Professional castings applications
- Process category (PROC):
- PROC 11: Non industrial spraying
- Name of activity / technique:
- Professional castings applications
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Name of activity / technique:
- Professional castings applications
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Name of activity / technique:
- Professional castings applications
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Name of activity / technique:
- Professional castings applications
- Process category (PROC):
- PROC 19: Hand-mixing with intimate contact and only PPE available.
- Name of activity / technique:
- Professional castings applications
- Process category (PROC):
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Product category used:
- PC 1: Adhesives, sealants
- Sector of end use:
- SU 12: Manufacture of plastics products, including compounding and conversion
- Subsequent service life relevant to this use:
- no
- Related assessment:
- use assessed in an own CSR
- Biological Sewage Treatment Plant (STP):
- municipal biological STP
- Release from the site to::
- wastewater
- Release estimation method:
- ERC
- Release from the site to::
- ambient air
- Release estimation method:
- ERC
- Release from the site to::
- non-agricultural soil
- Release estimation method:
- ERC
- Exposed compartment:
- freshwater
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- sediment (freshwater)
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- marine water
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- sediment (marine water)
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- sewage treatment plant
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- air
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- agricultural soil
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- predators' prey (freshwater)
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- predators' prey (marine water)
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- top predators' prey (marine water)
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- predators' prey (terrestrial)
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Biological Sewage Treatment Plant (STP):
- municipal biological STP
- Release from the site to::
- wastewater
- Release estimation method:
- ERC
- Release from the site to::
- ambient air
- Release estimation method:
- ERC
- Release from the site to::
- non-agricultural soil
- Release estimation method:
- ERC
- Exposed compartment:
- freshwater
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- sediment (freshwater)
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- marine water
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- sediment (marine water)
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- sewage treatment plant
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- air
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- agricultural soil
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- predators' prey (freshwater)
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- predators' prey (marine water)
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- top predators' prey (marine water)
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- predators' prey (terrestrial)
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Physical form of the used product:
- liquid, including paste/slurry/suspension
- Place of use:
- indoor
- Physical form of the used product:
- liquid, including paste/slurry/suspension
- Place of use:
- indoor
- Physical form of the used product:
- liquid, including paste/slurry/suspension
- Place of use:
- indoor
- Physical form of the used product:
- liquid, including paste/slurry/suspension
- Place of use:
- indoor
- Physical form of the used product:
- liquid, including paste/slurry/suspension
- Place of use:
- indoor
- Physical form of the used product:
- liquid, including paste/slurry/suspension
- Place of use:
- indoor
- Physical form of the used product:
- liquid, including paste/slurry/suspension
- Place of use:
- indoor
- Physical form of the used product:
- liquid, including paste/slurry/suspension
- Place of use:
- indoor
- Physical form of the used product:
- liquid, including paste/slurry/suspension
- Place of use:
- indoor
- Physical form of the used product:
- liquid, including paste/slurry/suspension
- Place of use:
- indoor
- Physical form of the used product:
- liquid, including paste/slurry/suspension
- Place of use:
- indoor
- Physical form of the used product:
- liquid, including paste/slurry/suspension
- Place of use:
- indoor
- Physical form of the used product:
- liquid, including paste/slurry/suspension
- Place of use:
- indoor
- Physical form of the used product:
- liquid, including paste/slurry/suspension
- Place of use:
- indoor
- Physical form of the used product:
- liquid, including paste/slurry/suspension
- Place of use:
- indoor
- Physical form of the used product:
- liquid, including paste/slurry/suspension
- Place of use:
- indoor
- Physical form of the used product:
- liquid, including paste/slurry/suspension
- Place of use:
- indoor
Reference
Contributing activity / technique for the environmentopen allclose all
Contributing activity / technique for workersopen allclose all
ContribScenEnvirWorkerRepopen allclose all
Contributing scenario for the environment (related to workers activities)
Conditions of use for the environment
Amounts used, frequency and duration of use (or from service life)
Other conditions
Conditions and measures related to Biological Sewage Treatment Plant
Releases to waste and the environment
Release to the environment
ReleaseEnvirRepopen allclose all
Exposure of the environment
PECopen allclose all
Exposure of humans via the environment
Contributing scenario for the environment (related to workers activities)
Conditions of use for the environment
Amounts used, frequency and duration of use (or from service life)
Other conditions
Conditions and measures related to Biological Sewage Treatment Plant
Releases to waste and the environment
Release to the environment
ReleaseEnvirRepopen allclose all
Exposure of the environment
PECopen allclose all
Exposure of humans via the environment
ContribScenWorkersRepopen allclose all
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
Amounts used (or contained in articles), frequency and duration of use/exposure
Technical and organisational conditions and measures
TechCondRepopen allclose all
Conditions and measures related to personal protection, hygiene and health evaluation
PPERepopen allclose all
Other conditions affecting workers exposure
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
Amounts used (or contained in articles), frequency and duration of use/exposure
Technical and organisational conditions and measures
TechCondRepopen allclose all
Conditions and measures related to personal protection, hygiene and health evaluation
PPERepopen allclose all
Other conditions affecting workers exposure
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
Amounts used (or contained in articles), frequency and duration of use/exposure
Technical and organisational conditions and measures
TechCondRepopen allclose all
Conditions and measures related to personal protection, hygiene and health evaluation
PPERepopen allclose all
Other conditions affecting workers exposure
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
Amounts used (or contained in articles), frequency and duration of use/exposure
Technical and organisational conditions and measures
TechCondRepopen allclose all
Conditions and measures related to personal protection, hygiene and health evaluation
PPERepopen allclose all
Other conditions affecting workers exposure
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
Amounts used (or contained in articles), frequency and duration of use/exposure
Technical and organisational conditions and measures
TechCondRepopen allclose all
Conditions and measures related to personal protection, hygiene and health evaluation
PPERepopen allclose all
Other conditions affecting workers exposure
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
Amounts used (or contained in articles), frequency and duration of use/exposure
Technical and organisational conditions and measures
TechCondRepopen allclose all
Conditions and measures related to personal protection, hygiene and health evaluation
PPERepopen allclose all
Other conditions affecting workers exposure
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
Amounts used (or contained in articles), frequency and duration of use/exposure
Technical and organisational conditions and measures
TechCondRepopen allclose all
Conditions and measures related to personal protection, hygiene and health evaluation
PPERepopen allclose all
Other conditions affecting workers exposure
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
Amounts used (or contained in articles), frequency and duration of use/exposure
Technical and organisational conditions and measures
TechCondRepopen allclose all
Conditions and measures related to personal protection, hygiene and health evaluation
PPERepopen allclose all
Other conditions affecting workers exposure
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
Amounts used (or contained in articles), frequency and duration of use/exposure
Technical and organisational conditions and measures
TechCondRepopen allclose all
Conditions and measures related to personal protection, hygiene and health evaluation
PPERepopen allclose all
Other conditions affecting workers exposure
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
Amounts used (or contained in articles), frequency and duration of use/exposure
Technical and organisational conditions and measures
TechCondRepopen allclose all
Conditions and measures related to personal protection, hygiene and health evaluation
PPERepopen allclose all
Other conditions affecting workers exposure
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
Amounts used (or contained in articles), frequency and duration of use/exposure
Technical and organisational conditions and measures
TechCondRepopen allclose all
Conditions and measures related to personal protection, hygiene and health evaluation
PPERepopen allclose all
Other conditions affecting workers exposure
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
Amounts used (or contained in articles), frequency and duration of use/exposure
Technical and organisational conditions and measures
TechCondRepopen allclose all
Conditions and measures related to personal protection, hygiene and health evaluation
PPERepopen allclose all
Other conditions affecting workers exposure
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
Amounts used (or contained in articles), frequency and duration of use/exposure
Technical and organisational conditions and measures
TechCondRepopen allclose all
Conditions and measures related to personal protection, hygiene and health evaluation
PPERepopen allclose all
Other conditions affecting workers exposure
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
Amounts used (or contained in articles), frequency and duration of use/exposure
Technical and organisational conditions and measures
TechCondRepopen allclose all
Conditions and measures related to personal protection, hygiene and health evaluation
PPERepopen allclose all
Other conditions affecting workers exposure
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
Amounts used (or contained in articles), frequency and duration of use/exposure
Technical and organisational conditions and measures
TechCondRepopen allclose all
Conditions and measures related to personal protection, hygiene and health evaluation
PPERepopen allclose all
Other conditions affecting workers exposure
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
Amounts used (or contained in articles), frequency and duration of use/exposure
Technical and organisational conditions and measures
TechCondRepopen allclose all
Conditions and measures related to personal protection, hygiene and health evaluation
PPERepopen allclose all
Other conditions affecting workers exposure
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
Amounts used (or contained in articles), frequency and duration of use/exposure
Technical and organisational conditions and measures
TechCondRepopen allclose all
Conditions and measures related to personal protection, hygiene and health evaluation
PPERepopen allclose all
Other conditions affecting workers exposure
Uses by professional workers
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC8c: Widespread use leading to inclusion into/onto article (indoor)
- ERC8f: Widespread use leading to inclusion into/onto article (outdoor)
Contributing activity / technique for workers
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 13: Treatment of articles by dipping and pouring
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant to this use:
- yes
- Related assessment:
- use assessed in an own CSR
Uses by professional workers
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC8a: Widespread use of non-reactive processing aid (no inclusion into or onto article, indoor)
- ERC8c: Widespread use leading to inclusion into/onto article (indoor)
Contributing activity / technique for workers
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant to this use:
- no
Uses by professional workers
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported <10tonnes/year per registrant
- Name:
- 2,2'-[propane-2,2-diylbis(4,1-phenyleneoxymethylene)]dioxirane (BADGE)
- Type of composition:
- legal entity composition of the substance
- State / form:
- liquid
- Reference substance:
- 2,2'-[propane-2,2-diylbis(4,1-phenyleneoxymethylene)]dioxirane (BADGE)
- Reference substance:
- 2,2'-[propane-2,2-diylbis(4,1-phenyleneoxymethylene)]dioxirane (BADGE)
- Name of activity / technique:
- Professional use
- Environmental release category (ERC):
- ERC8c: Widespread use leading to inclusion into/onto article (indoor)
- ERC8f: Widespread use leading to inclusion into/onto article (outdoor)
- Name of activity / technique:
- Professional use
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 10: Roller application or brushing
- PROC 11: Non industrial spraying
- PROC 13: Treatment of articles by dipping and pouring
- PROC 19: Hand-mixing with intimate contact and only PPE available.
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Product category used:
- PC 32: Polymer preparations and compounds
- Sector of end use:
- SU 17: General manufacturing, e.g. machinery, equipment, vehicles, other transport equipment
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant to this use:
- no
Reference
Contributing activity / technique for the environment
Contributing activity / technique for workers
Uses by professional workers
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC8c: Widespread use leading to inclusion into/onto article (indoor)
- ERC8f: Widespread use leading to inclusion into/onto article (outdoor)
Contributing activity / technique for workers
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 10: Roller application or brushing
- PROC 11: Non industrial spraying
- PROC 13: Treatment of articles by dipping and pouring
- PROC 15: Use as laboratory reagent
- PROC 19: Hand-mixing with intimate contact and only PPE available.
- Product category used:
- PC 1: Adhesives, sealants
- PC 9a: Coatings and paints, thinners, paint removes
- Subsequent service life relevant to this use:
- no
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
