Registration Dossier

Administrative data

First-aid measures

First aid: general information: Take off all contaminated clothing immediately.
First aid inhalation: Seek medical advice immediately. If inhaled, remove to fresh air. If breathing is difficult, give oxygen. If unconscious, evaluate
the need for artificial respiration.
First aid skin: Wash off with plenty of water and soap, seek medical advice if necessary.
First aid eye: Rinse with plenty of water.
First aid ingestion: Seek medical advice immediately. If swallowed, get medical attention immediately. Only induce vomiting if directed by a physician. Never give anything by mouth to an unconscious person.


Get immediate medical attention.

Fire-fighting measures

Extinguishing media: Water spray, foam, CO2, dry powder.
Hazards during fire-fighting: Flammable liquid. Vapors can travel to a source of ignition and flash back. Explosive mixtures may occur at temperatures at or above the flashpoint.
Fire-fighting / further advice: Containers can build up pressure if exposed to heat (fire). Cool with water spray. As in any fire, wear self-contained,
pressure-demand breathing apparatus (MSHA-NIOSH approved or equivalent) and full protective gear.

Accidental release measures

Personal precautions: Keep away from sources of ignition - No smoking. Ensure adequate ventilation. Do not allow to enter drains (danger of
explosion).
Environmental Precautions: Should not be released into the environment. Obey relevant local, state, provincial and federal laws and regulations.
Methods for cleaning or taking up: Take up mechanically or with an absorbent material. Fill into marked, sealable containers.
sand, diatomaceous earth, universal absorbent, sawdust

Handling and storage

Advice on safe handling: Provide good ventilation or extraction.
Fire and explosion protection: Take precautionary measures against static charges, keep away from sources of ignition. Explosion protection
equipment required. Keep away from flames / sparks, no smoking.
Storage requirements: Keep container tightly closed. Under inert gas (nitrogen).

Transport information

Land transport (ADR/RID)

UN number:
2520
Shippingopen allclose all
Class:
3
Classification code:
F1
Packaging group:
III
Labels:
3
SpecialProvisionsopen allclose all

Inland waterway transport (ADN(R))

UN number:
2520
Shippingopen allclose all
Class:
3
Classification code:
F1
Packaging group:
III
Labels:
3
Remarksopen allclose all

Marine transport (IMDG)

UN number:
2520
Proper shipping name and description:
CYCLOOCTADIENE
Chemical name:
1,5-Cyclooctadiene
Class:
3
Packaging group:
III
EmS number:
F-E, S-D
Labels:
3
Marine pollutant:
yes (P)
Remarksopen allclose all

Air transport ICAO/IATA

UN number:
2520
Proper shipping name and description:
Cyclooctadienes
Chemical name:
1,5-Cyclooctadiene
Class:
3
Packaging group:
III
Labels:
3
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Advice on system design: Provide good ventilation or extraction.
Respiratory Protection: In case of dusts/vapours/aerosols being formed or if the limit values like TLV are exceeded: use respiratory equipment
with suitable filter or wear a self contained respiratory apparatus
Hand protection:
The following details refer to information provided by K├Ąchele-Cama Latex GmbH, Am Kreuzacker 9, D-36124 Eichenzell, www.kcl.de
Type of material Butoject (898)
Material thickness 0,7 mm
Breakthrough time 480 min
Eye protection: safety glasses
Body protection: Do not inhale vapours / aerosols. Avoid contact with skin and eyes.

Stability and reactivity

Conditions to avoid: Keep away from heat and sources of ignition.
Substances to avoid: oxidizing agents
Thermal Decomposition: Distills without decomposition at atmospheric pressure.
Hazardous reaction: Formation of peroxides may occur

Disposal considerations

With respect to local regulations, e.g. dispose of to suitable waste incineration plant. No waste key number as per the European Waste Types List
can be assigned to this product, since such classification is based on the (as yet undetermined) use to which the product is put by the consumer
The waste key number must be determined as per the European Waste Types List (decision on EU Waste Types List 2000/532/EC) in cooperation
with the disposal firm / producing firm / official authority.