Registration Dossier

Administrative data

First-aid measures

4.1. Description of first aid measures
_First-aid measures after inhalation : Remove victim to fresh air and allow to rest. Get medical advice/attention if you feel unwell.
_ First-aid measures after skin contact : Wash immediately with plenty of water. If skin irritation persists, take medical advice.
_First-aid measures after eye contact : Rinse immediately and abundantly with water by prising open the eyelids. Consult a specialist.
_First-aid measures after ingestion : Get medical advice/attention.

4.2. Most important symptoms and effects, both acute and delayed
_Symptoms/injuries after skin contact : May cause an allergic skin reaction.
_ Symptoms/injuries after eye contact : Causes serious eye damage.

Fire-fighting measures

5.1. Extinguishing media
_Suitable extinguishing media : Carbon dioxide (CO2). Dry powder. Foam. Water spray.

5.2. Special hazards arising from the substance or mixture
_Hazardous decomposition products in case of fire : In case of fire, oxides of carbon and nitrogen may be liberated.

5.3. Advice for firefighters
_Protection during firefighting : Do not attempt to fight the fire without suitable protective equipment. Wear self-contained breathing apparatus due to dangerous fumes and gases.

Accidental release measures

6.1. Personal precautions, protective equipment and emergency procedures
_General measures : Avoid all contact with skin, eyes, or clothing. Avoid dust production. Do not breathe dust.

6.1.1. For non-emergency personnel
_Emergency procedures : Ventilate spillage area. Do not attempt to fight the fire without suitable protective equipment.

6.1.2. For emergency responders
_Protective equipment : Wear suitable protective clothing. In case of insufficient ventilation, use a breathing mask with filter type: P3. For further information refer to MSDS section 8: "Exposure controls/personal protection".

6.2. Environmental precautions
_Prevent from entering sewers or the immediate environment.

6.3. Methods and material for containment and cleaning up
_For containment : Sweep up or vacuum up the product. Shovel into suitable and closed container for disposal. Dispose of in accordance with relevant local regulations. Dispose of waste water in conformity with current regulations.

6.4. Reference to other sections
_Waste treatment methods : Authorized disposal. Dispose of in a safe manner, in accordance with local regulations. Avoid dispersal of spilled material, and runoff and contact with soil, waterways, drains and sewers. Recover or destroy according to current local regulations. This material and its container must be disposed of in a safe way. Handle uncleaned and non-rinsed empty containers with care.

Handling and storage

7.1. Precautions for safe handling
_Precautions for safe handling : Ensure good ventilation of the work station. Otherwise wear personal breathing apparatus. Arrange for eye wash possibility. Wear recommended personal protective equipment. For further information refer to MSDS section 8: "Exposure controls/personal protection". Avoid contact with skin and eyes. Avoid release to the environment. Do not ingest. Avoid dust production. Do not breathe dust.
_Hygiene measures : Wear suitable protective clothing. Do not eat, drink or smoke when using this product. Wash hands immediately after handling the product. Change contaminated clothing and in any case at the end of work. Handle in accordance with good industrial hygiene and safety practice. Avoid contact with skin, eyes and clothing.

7.2. Conditions for safe storage, including any incompatibilities
_Technical measures : Electrical equipment, including lighting, must conform to current legislation.
_Storage conditions : Store tightly closed in a dry, cool and well-ventilated place. - Avoid: Storage exposed to bad weather.
_Incompatible materials : None.
_Special rules on packaging :Store in original package.
_Packaging materials : Metal containers, glass, plastic.

Transport information

Land transport (ADR/RID)

UN number:
Not regulated for transport
Shippingopen allclose all
SpecialProvisionsopen allclose all

Inland waterway transport (ADN(R))

UN number:
Not regulated for transport
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

UN number:
Not regulated for transport
Remarksopen allclose all

Air transport ICAO/IATA

UN number:
Not regulated for transport
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Appropriate engineering controls : Arrange for eye wash possibility. Ensure good ventilation of the work station.

Hand protection : Protective gloves. The protective gloves to be used must comply with the specifications of EC directive 89/686/EEC and the resultant standard EN 374. Breakthrough time : refer to the recommendations of the supplier.

Eye protection : Safety goggles/visor. (DIN EN 166).

Skin and body protection : Wear suitable protective clothing.

Respiratory protection : In case of insufficient ventilation, use a breathing mask with filter type: P3.

Stability and reactivity

10.1. Reactivity
No additional information available

10.2. Chemical stability
Stable at ambient temperature and under normal conditions of use.

10.3. Possibility of hazardous reactions
No additional information available

10.4. Conditions to avoid
No known hazard.

10.5. Incompatible materials
None.

10.6. Hazardous decomposition products
No additional information available

Disposal considerations

13.1. Waste treatment methods
Waste treatment methods : Authorized disposal. Dispose of in a safe manner, in accordance with local regulations. Avoid dispersal of spilled material, and runoff and contact with soil, waterways, drains and sewers. Recover or destroy according to current local regulations. This material and its container must be disposed of in a safe way. Handle uncleaned and non-rinsed empty containers with care