Registration Dossier

Guidance on Safe Use

Guidance on Safe Use

Currently viewing:

Administrative data

First-aid measures

Description of first aid measures
General information
Remove soiled or soaked clothing immediately
After inhalation
When inhaled remove to fresh air and seek medical aid.
After contact with skin
In case of contact with skin wash off immediately with soap and water
After contact with eyes
In case of contact with eyes rinse thoroughly with plenty of water and seek medical advice
After ingestion
Summon a doctor immediately.

- Most important symptoms and effects, both acute and delayed
Symptoms
No symptoms known currently.
Hazards
No hazards known at this time.

- Indication of any immediate medical attention and special treatment needed
Treatment
Treat symptomatically.

Fire-fighting measures

- Extinguishing media
Suitable extinguishing media
water spray jet
foam
carbon dioxide
dry powder

- Special hazards arising from the substance or mixture
In case of fires, hazardous combustion gases are formed: Carbon monoxide (CO)
Nitrous gases (NOx)
Hydrogen chloride (HCl)

-. Advice for firefighters
Special protective equipment for firefighting
Use self-contained breathing apparatus

Accidental release measures

- Personal precautions, protective equipment and emergency procedures
Wear suitable personal protective equipment.
- Environmental precautions
Do not allow to enter drains or waterways
- Methods and material for containment and cleaning up
Pick up with absorbent material (eg sand, sawdust). Rinse away rest with water
- Reference to other sections
Additional information
Information regarding Safe handling, see chapter 7.

Handling and storage

- Precautions for safe handling
Advice on safe handling
Open and handle container with care.
Advice on protection against fire and explosion
Observe the general rules of industrial fire protection

- Conditions for safe storage, including any incompatibilities
Further information on storage conditions
- sensitive to frost - If the product becomes opaque, thick or frozen owing to low
temperatures, allow to thaw at 30 - 40 °C and homogenize it.The product will then be suitable
for use.

- Specific end use(s)
No further recommendations.

Transport information

Land transport (ADR/RID)

UN number:
ADR
UN no. UN 3082

RID
UN no. UN 3082



Proper shipping name and description:
Proper shipping name: Environmentally hazardous substance, liquid, n.o.s.
Chemical name:
Hazard inducer(s): CETYLTRIMETHYLAMMONIUMCHLORIDE
Language:
English
Class:
9
Classification code:
Primary risk: 9
Packaging group:
Packing group: III
Labels:
Hazard no. : 90
Remarks:
Shipment permitted

Inland waterway transport (ADN(R))

UN number:
ADNR
UN no. UN 3082
Proper shipping name and description:
Proper shipping name: Environmentally hazardous substance, liquid, n.o.s.
Chemical name:
Hazard inducer(s): CETYLTRIMETHYLAMMONIUMCHLORIDE
Language:
English
Class:
Class: 9
Classification code:
Primary risk: 9
Packaging group:
Packing group: III
Remarks
Shipment permitted

Marine transport (IMDG)

UN number:
IMDG
UN no. UN 3082


Proper shipping name and description:
Proper shipping name: Environmentally hazardous substance, liquid, n.o.s.
Chemical name:
Hazard inducer(s): CETYLTRIMETHYLAMMONIUMCHLORIDE
Class:
Class: 9
Packaging group:
Packing group: III
EmS code:
EmS : F-A S-F
Marine pollutant
Remarks
Shipment permitted

Air transport ICAO/IATA

UN number:
IATA
UN no. UN 3082
Proper shipping name and description:
Proper shipping name: Environmentally hazardous substance, liquid, n.o.s.
Chemical name:
Hazard inducer(s): CETYLTRIMETHYLAMMONIUMCHLORIDE
Class:
Class: 9
Packaging group:
Packing group: III
Remarks
Shipment permitted
SpecialProvisionsopen allclose all

Exposure controls / personal protection

- General protective measures
Avoid contact with skin
Avoid contact with eyes

- Hygiene measures
Wash hands before breaks and after work.
Use barrier skin cream.
Remove soiled or soaked clothing immediately and clean thoroughly before using again.

- Hand protection : For long-term exposure:
Butyl rubber gloves
Minimum breakthrough time / gloves : 480 min
Minimum thickness / gloves 0,7 mm
For short-term exposure (splash protection):
Nitrile rubber gloves.
Minimum breakthrough time / gloves : 30 min
Minimum thickness / gloves 0,4 mm
These types of protective gloves are offered by various
manufacturers. Please note the manufacturers´ detailed
statements, especially about the minimum thickness and the
minimum breakthrough time. Consider also the particular
working conditions under which the gloves are being used.

- Eye protection : Depending on the risk, wear sufficient eye protection (safety
glasses with side protection or goggles, and if necessary, face
shield.)

Stability and reactivity

- Chemical stability
Under normal conditions the product is stable.
- Possibility of hazardous reactions
When handled and stored appropriately no dangerous reactions are known
-. Conditions to avoid
None known.
- Incompatible materials
not known
-. Hazardous decomposition products
Nitrous oxides (NOx)
Hydrogen chloride (HCl)

Disposal considerations

- Waste treatment methods
Product
In accordance with local authority regulations, take to special waste incineration plant
- Uncleaned packaging
Packaging that cannot be cleaned should be disposed of as product waste