Registration Dossier

Data platform availability banner - registered substances factsheets

Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.

The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.

Diss Factsheets

Guidance on Safe Use

Guidance on Safe Use

Currently viewing:

Administrative data

First-aid measures

Description of first aid measures

General information:

Remove soiled or soaked clothing immediately.

Seek medical assistance if discomfort continues.

After inhalation:

Remove the casualty into fresh air and keep him calm.

After contact with skin:

In case of contact with skin wash off immediately with soap and water.

After contact with eyes:

Rinse immediately with gently running water for 15 minutes, maintaining eyelids open.

Consult an ophthalmologist or a physician.

After ingestion:

Rinse out mouth and give plenty of water to drink.

Get medical treatment.

Most important symptoms and effects, both acute and delayed

Symptoms: No symptoms known currently.

Hazards: No hazards known at this time.

Indication of any immediate medical attention and special treatment needed

Treatment: Treat symptomatically.

Fire-fighting measures

Suitable extinguishing media:

water spray jet

alcohol-resistant foam

Extinguishing media that must not be used for safety reasons:

dry powder

carbon dioxide

Full water jet

Special hazards arising from the substance or mixture

In case of fires, hazardous combustion gases are formed: Carbon monoxide (CO), Carbon dioxide (CO2)

Advice for firefighters:

Special protective equipment for firefighting.

Use self-contained breathing apparatus.

Wear full protective suit.

Further information:

Wear self-contained breathing apparatus (SCBA) and full protective clothing.

Accidental release measures

Personal precautions, protective equipment and emergency procedures:

Use personal protective clothing.

Ensure adequate ventilation.

Avoid dust formation.

Avoid contact with skin and eyes.

Environmental precautions:

If the product gets into drains, inform the relevant authorities immediately.

Do not discharge into the drains/surface waters/groundwater.

Methods and material for containment and cleaning up:

Place in suitable containers and send for recovery or disposal.

Take up mechanically.

Handling and storage

Hygiene measures:

Work in an adequately ventilated room.

Change contaminated clothes immediately.

Advice on protection against fire and explosion:

Dust can form an explosive mixture with air.

Take precautions against accumulation of electrostatic charge

Keep away from sources of ignition.

Avoid influence of heat.

Dust explosion class : ST3 Capable of dust explosion

Conditions for safe storage, including any incompatibilities

Advice on storage compatibility: Not required.

Specific end use(s):

No further recommendations.

Transport information

Land transport (UN RTDG/ADR/RID)

UN number:
not restricted
Shippingopen allclose all
SpecialProvisionsopen allclose all

Inland waterway transport (UN RTDG/ADN(R))

UN number:
not restricted
Shippingopen allclose all
Remarksopen allclose all

Marine transport (UN RTDG/IMDG)

UN number:
not restricted
Shippingopen allclose all
Remarksopen allclose all

Air transport (UN RTDG/ICAO/IATA)

UN number:
not restricted
Shippingopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

General protective measures:

Avoid contact with eyes and skin.

Do not inhale dust.

Respiratory protection : Short term: filter apparatus, Filter P2

Hand protection : Chemical resistant gloves according to category III of DIN EN374

Minimum thickness (glove): not determined

With solid dry substances permeation is not to be expected, therefore the breakthrough-time for this protective glove has not been measured.

These types of protective gloves are offered by various manufacturers. Please note the manufacturers´ detailed statements, especially about the minimum thickness and the minimum breakthrough time. Consider also the particular working conditions under which the gloves are being used.

Eye protection : safety glasses

Body protection : protective clothing

Stability and reactivity

Reactivity: See under "Possibility of hazardous reactions".

Chemical stability: Stable.

Possibility of hazardous reactions: No hazardous reactions known. Stable.

Conditions to avoid: strong heat.

Incompatible materials: not known.

Hazardous decomposition products:

When handled and stored appropriately, no dangerous decomposition products are known.

Disposal considerations

Uncleaned packaging:

Regulations concerning reuse or disposal of used packaging materials must be observed.

Contaminated packaging should be emptied as far as possible and after appropriate cleansing may be taken for reuse.