Registration Dossier

Administrative data

First-aid measures

In general:
Immediately remove any clothing soiled by the product. Symptoms of poisoning may even occur after several hours; therefore medical observation for at least 48 hours after the accident. Get medical advice/attention if you feel unwell.

- After inhalation
Supply fresh air. If required, provide artificial respiration. Keep patient warmand quiet. Consult doctor if symptoms persist.
In case of unconsciousness, place patient stably in side position for transportation.
- After skin contact
The product is corrosive to skin.
Immediately wash with water and soap and rinse thoroughly. Take off contaminated clothing and wash before reuse.
- After eye contact
The product is damaging the eyes. Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. After that, consult a doctor.
- After swallowing
If swallowed, rinse mouth with water (only if the person is conscious). Do not induce vomiting. Drink plenty of water and provide fresh air. Call for a doctor immediately.

Fire-fighting measures

- Suitable extinguishing agents
Use fire extinguishing methods suitable to surrounding conditions.
CO2, powder or water spray. Fight larger fires with water spray or alcohol resistant foam.
- Special hazards caused by the substance, its products of combustion or resulting gases:
In case of fire, the following can be released:
Sulphur oxides (SOx)
- Protective equipment: Wear self-contained respiratory protective device.
- Additional information
Collect contaminated fire fighting water separately. It must not enter the sewage system.
Dispose of fire debris and contaminated fire fighting water in accordance with official regulations.

Accidental release measures

- Person-related safety precautions:
Use respiratory protective device against the effects of fumes/dust/aerosol. Wear protective acid-resistant clothing. Avoid contact with eyes and skin.
- Measures for environmental protection:
Avoid release to the environment. Do not allow to enter sewers/ surface or ground water.
Inform respective authorities in case of seepage into water course or sewage system.
In case of seepage into the ground, inform responsible authorities. Absorb spillage to prevent material damage. Collect spillage.
- Measures for cleaning/collecting:
Send for recovery or disposal in suitable receptacles.
Pick up mechanically.
Ensure adequate ventilation.

Handling and storage

- Information for safe handling:
Keep receptacles tightly sealed.
Ensure good ventilation/exhaustion at the workplace.
Waste air is to be released into the atmosphere only via suitable separators.
- Information about fire - and explosion protection: No special measures required.
Storage
- Keep only in original container.
- Store in corrosive resistant container with a resistant inner liner.
- Keep receptacle tightly sealed.
- Store in cool, dry conditions in well sealed receptacles.

Transport information

Land transport (ADR/RID)

UN number:
3264 (No specific Listing)
Proper shipping name and description:
Corrosive Liquid, Acidic, Inorganic, N.O.S. (Divanadium tris(sulphate))
Chemical name:
Divanadium tris(sulphate)
Language:
English
Class:
8 Corrosive substances
Packaging group:
III
Labels:
8
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

UN number:
3264 (No specific Listing)
Proper shipping name and description:
Corrosive Liquid, Acidic, Inorganic, N.O.S. (Divanadium tris(sulphate))
Chemical name:
Divanadium tris(sulphate)
Class:
8 Corrosive substances.
Packaging group:
III
Labels:
8
Marine pollutant
Remarksopen allclose all

Air transport ICAO/IATA

UN number:
3264 (No specific Listing)
Proper shipping name and description:
Corrosive Liquid, Acidic, Inorganic, N.O.S. (Divanadium tris(sulphate))
Chemical name:
Divanadium tris(sulphate)
Class:
8 Corrosive substances
Packaging group:
III
Labels:
8
Remarksopen allclose all

Additional transport information

Additional transport information
Transport/Additional information:
- Limited quantities (LQ) 5 L
- Is corrosive to skin and metals and meets criteria of UN Class 8 Corrosive substances, Packing group III

Exposure controls / personal protection

Please refer to the respective exposure scenario document attached to IUCLID section 13 (addendum).

Stability and reactivity

Substance is chemically and thermally stable.
Incompatible materials: keep away from metals.
Hazardous decomposition: none

Disposal considerations

Please refer to the respective exposure scenario document attached to IUCLID section 13 (addendum).