Registration Dossier

Guidance on Safe Use

Guidance on Safe Use

Currently viewing:

Administrative data

First-aid measures

Inhalation:
Remove the victim to a place with fresh air and keep him/her at rest. Consult a doctor as necessary.

Skin contact:
Wash off with soap and plenty of water. If symptoms develop, consult a doctor as necessary.

Eye contact:
Immediately irrigate eyes with clean running water for at least 15 minutes and get medical treatment.

Ingestion:
Rinse mouth with water and give one or two glass/es of water or milk.
Get medical treatment immediately. If the victim is unconscious, do not give anything by mouth.

Protection of first-aiders:
First-aiders must wear appropriate personal protections such as rubber gloves and goggles.

Fire-fighting measures

Extinguishing media:
Fire-extinguishing powder and water spray.

Prohibited extinguishing media:
No information.

Specific hazards:
Avoid inhalation of combustion gas in fire-fighting operations since it contains hazardous gasses such as hydrogen bromide and carbon monoxide.

Specific methods of firefighting:
Remove all possible ignition sources and extinguish the fire with proper extinguishing agent. Extinguish the fire from the windward side as much as possible.
Evacuate people other than authorized personnel to a safe area. Sprinkle over the surrounding equipment to cool down. Prevent products/other chemicals from being discharged into a river and sewers due to the extinguishing water and such.

Protection of firefighters:
Wear proper protections (e.g. gloves, goggles and masks) in fire-fighting operations since combustion gas contains hazardous gasses such as hydrogen
bromide (HBr) and carbon monoxide (CO).

Accidental release measures

Personal precautions, protective equipment and emergency measures:
Make sure to wear appropriate protections such as gloves, goggles, and masks. In case of massive spill, evacuate people to a safe area. Be assured to ventilate as necessary.

Environmental precautions:
Do not directly discharge the material into a river and sewers without wastewater treatment.

Methods for cleaning up:
Collect powder leakage with an electronic vacuum cleaner (void cleaner) or a broom. Eliminate the leakage while preventing the scatter of powder dust. For impalpable powder, use static electricity-proof equipment.

Prevention of secondary hazards:
Remove all ignition sources and prepare extinguishing agent. Be careful because the floor surface can be slippery and may be a cause of a slip and fall accident if you leave the floor wet with the material. Do not walk on the contaminated surface unnecessarily. Use safe equipment which does not generate sparks.

Handling and storage

Handling:
Technical measures:
Provide an emergency eyewash and a quick drench shower in the immediate work area.

Precautions:
Wear a dust respirator to avoid inhaling powder dust. Carry out local exhaust ventilation as necessary.

Precautions for safe handling:
Avoid dust formation. Provide adequate ventilation at work areas. Wear appropriate protections such as glasses and gloves. After handling the material,
wash your hands and face thoroughly and gargle.

Storage:
Adequate storage condition:
Keep containers tightly sealed and store them in a well-ventilated indoor place. Be cautious of water and rain soakage. When storing the material with use of paper bags, handle very carefully to avoid ripped paper. No multi-stage loading.

Safe packaging materials:
Use original container.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

Remarksopen allclose all
Remarksopen allclose all

Additional transport information

Additional transport information
Any transportation practice regardless of by road, by sea, or by air must be in compliance with laws and regulations in your country or region.

UN classification: Not regulated.

UN number: Not regulated.

Proper shipping name: Not regulated.

Packing group: Not regulated.

Marine pollutant: Not regulated.

Other applicable information: No information is available.

Exposure controls / personal protection

Engineering measures:
Install local exhaust ventilation device if vapor, fume, mist, or dust generates.
Provide an emergency eyewash and a quick drench shower in the immediate work area.
Use static electricity-proof equipment.

Administration level:
Not established.

Control parameters:
Japan Society for Occupational Health: (The 2012 Edition): Not established.
ACGIH: (The 2009 Edition) Not established.

Personal protective equipment
Respiratory protection:
Dust protective mask if necessary.

Hand protection:
Impervious (chemical-/oil-proof) protective gloves.

Eye protection:
Safety glasses with side shield. (goggle type if necessary)

Skin and body protection:
Antistatic finish long-sleeve clothing.

Specific hygiene measures:
Wash your hands and face thoroughly and gargle after handling the material.

Stability and reactivity

Stability:
Stable under normal handling conditions.

Reactivity:
No self-reactivity.

Conditions to avoid:
Pyrolyzed under high temperature at or above 260 ℃.

Incompatible products:
No information.

Hazardous decomposition products:
Hydrogen bromide -- generated by pyrolysis.

Others:
No information.

Disposal considerations

The product should be incinerated in permitted facilities in accordance with applicable local/regional/national/international regulations. For low-concentration wastewater of the product, apply the appropriate disposal method based on its density. Dispose of container in accordance with local/regional/national/international regulations.