Registration Dossier

Physical & Chemical properties

Density

Currently viewing:

Administrative data

Link to relevant study record(s)

Reference
Endpoint:
relative density
Type of information:
experimental study
Adequacy of study:
key study
Study period:
2016
Reliability:
1 (reliable without restriction)
Rationale for reliability incl. deficiencies:
test procedure in accordance with generally accepted scientific standards and described in sufficient detail
Principles of method if other than guideline:
Density:
An Anton Paar DMA 4500 M Densimeter was used to measure the density of the submitted samples. The sample was analyzed three times.
These measurements were obtained in accordance with SIOP 6.22 which is based on ASTM D-4052 and CTM 0768.
GLP compliance:
no
Type of method:
other: Anton Paar DMA 4500 M Densimeter
Type:
density
Density:
0.939 g/cm³
Temp.:
20.01 °C
Remarks on result:
other: Average of 3 samples.
Key result
Type:
relative density
Density:
0.941
Temp.:
20.01 °C
Remarks on result:
other: Average of 3 samples. Value not provided in report table, however was calculated.

Table 1. Density Results

Sample Name

Density (g/cm³)

Specific Gravity

Density Temperature (°C)

8624816-1

0.93929

0.94099

20.01

8624816-2

0.93930

0.94099

20.01

8624816-3

0.93929

0.94098

20.01

Average

0.93929

 

 

Standard Deviation

0.00001

 

 

Conclusions:
An Anton Paar DMA 4500 M Densimeter was used to measure the density of the submitted samples. The sample was analyzed three times. The average density of the test material was 0.93929 g/cm^3.
Executive summary:

An Anton Paar DMA 4500 M Densimeter was used to measure the density of the submitted samples. The sample was analyzed three times. The average density of the test material was 0.93929 g/cm3.

Description of key information

An Anton Paar DMA 4500 M Densimeter was used to measure the density of the submitted samples. The sample was analyzed three times. The average density of the test material was 0.93929 g/cm3.

Key value for chemical safety assessment

Relative density at 20C:
0.941

Additional information

An Anton Paar DMA 4500 M Densimeter was used to measure the density of the submitted samples. The sample was analyzed three times. The average density of the test material was 0.93929 g/cm3.