Registration Dossier

Administrative data

First-aid measures

General information Ensure that medical personnel are aware of the material(s) involved, and take precautions to
protect themselves.
Description of first aid measures
Inhalation If exposed to excessive levels of dusts or fumes, remove to fresh air and get medical attention if
cough or other symptoms develop.
Skin contact Wash with soap and water. Get medical attention if irritation develops and persists.
Eye contact Do not rub eyes. Hold eyelids apart and flush eyes with plenty of water for at least 15 minutes.
Remove contact lenses, if present and easy to do. Continue rinsing. Get medical attention if
irritation develops and persists.
Ingestion Rinse mouth. Do not induce vomiting without advice from poison control center. If vomiting occurs,
keep head low so that stomach content doesn't get into the lungs.
Most important symptoms and effects, both acute and delayed
Direct contact with eyes may cause serious irritation.
Indication of any immediate medical attention and special treatment needed
Treat symptomatically.

Fire-fighting measures

General fire hazards No unusual fire or explosion hazards noted.
Extinguishing media
Suitable extinguishing media Foam. Dry chemicals. Carbon dioxide (CO2).
Unsuitable extinguishing media None known.
Special hazards arising from the substance or mixture
During fire, gases hazardous to health may be formed.
Advice for firefighters
Special protective equipment for firefighters
Self-contained breathing apparatus and full protective clothing must be worn in case of fire.
Special fire fighting procedures
Cool containers exposed to heat with water spray and remove container, if no risk is involved.

Accidental release measures

Personal precautions, protective equipment and emergency procedures
For non-emergency personnel Ensure adequate ventilation. Avoid contact with skin and eyes. Surfaces may become slippery
after spillage. Wear suitable protective clothing and gloves.
For emergency responders Keep unnecessary personnel away.
Individual protection measures, suvh as personal protective equipment
General information: personal protection equipment should be chosen according to CEN standards and in discussion with the supplier of the personal protective equipment.
Eye/face protection: chemical goggles are recommended
Skin protection:
- Hand protection: wear appropriate chemical resistant gloves. Suitable gloves can be r4ecommended by the glove supplier.
- Other: wera suitable protective clothing
Respiratory protection: No personal respiratory protective equipment normally required.
Thermal hazards: wear appropriate thermal protective clothing, when necessary.
Hygiene measures: Always observe good personal hygiene measures, such as washing after handling the material and before eating, drinking and/or smoking. Routinely wash work clothing and protective equipment to remove contaminants.
Environmental precautions Avoid release to the environment. Prevent further leakage or spillage if safe to do so.
Methods and material for containment and cleaning up
Sweep up or vacuum up spillage and collect in suitable container for disposal.
DISPOSAL CONSIDERATIONS
Waste treatment methods
Residual waste: dispose of in accordance with local regulations. Empty containers or liners may retain some product residues. This material and its container must be disposed of in a safe manner.
Contaminated packaging: empty containers should be taken to an approved waste handling site for recycling or disposal. Since emptied containers may retain product residue, follow label warnings even after container is emptied.
EU waste code: The Watse code should be assigned in discussion between the user, the producer and the waste disposal company.
Disposal methods /information: collect and reclaim or dispose in sealed containers at licensed waste disposal site.
Special precautions: dispose in accordance with all applicable regulations.

Handling and storage

Precautions for safe handling: Avoid contact with eyes. Provide adequate ventilation. Wear appropriate personal protective
equipment. Wash thoroughly after handling. Observe good industrial hygiene practices. Avoid
release to the environment.
By contacting with water or solvents, trace level of substances such as Styrene-divinylbenzene
sulfonated copolymer, Benzoic acid, NH2CH2CH2SH, Benzaldehyde, Sulfuric acid, Formaldehyde
etc. may be released into the liquid. Please refer to applicable regulations and, if necessary,
please call for details.
Conditions for safe storage, including any incompatibilities:
Store in original tightly closed container. Store in a cool, dry place out of direct sunlight. Store
above freezing. Store away from strong oxidizing agents.

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

Remarksopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Occupational exposure limits No exposure limits noted for ingredient(s).
Biological limit values No biological exposure limits noted for the ingredient(s).
Recommended monitoring procedures
Follow standard monitoring procedures.
Derived no-effect level (DNEL) Not available.
Predicted no effect concentrations (PNECs)
Not available.
Exposure controls
Appropriate engineering controls Good general ventilation (typically 10 air changes per hour) should be used. Ventilation rates
should be matched to conditions. If applicable, use process enclosures, local exhaust ventilation,
or other engineering controls to maintain airborne levels below recommended exposure limits. If
exposure limits have not been established, maintain airborne levels to an acceptable level.
Provide eyewash station.
Individual protection measures, such as personal protective equipment
General information Personal protection equipment should be chosen according to the CEN standards and in
discussion with the supplier of the personal protective equipment.
Eye/face protection Chemical goggles are recommended.
Skin protection
- Hand protection Wear appropriate chemical resistant gloves. Suitable gloves can be recommended by the glove
supplier.
- Other Wear suitable protective clothing.
Respiratory protection No personal respiratory protective equipment normally required.
Thermal hazards Wear appropriate thermal protective clothing, when necessary.
Hygiene measures Always observe good personal hygiene measures, such as washing after handling the material
and before eating, drinking, and/or smoking. Routinely wash work clothing and protective
equipment to remove contaminants.
Environmental exposure controls Environmental manager must be informed of all major releases.

Stability and reactivity

Reactivity The product is stable and non-reactive under normal conditions of use, storage and
transport.
Contact with salt solutions generates acid due to ion exchange.
Contact or mixture with oxidizing agent such as nitric acid may cause ignition or
explosion.[1]
Chemical stability Material is stable under normal conditions. Contact with water or solvents may release trace
amounts of monomers into the liquid.
Possibility of hazardous reactions No dangerous reaction known under conditions of normal use.
Conditions to avoid Contact with incompatible materials.
Incompatible materials Strong oxidising agents.
Hazardous decomposition products Irritating and/or toxic fumes and gases may be emitted upon the product's decomposition.
At thermal decomposition temperatures, NOx, SOx, carbon monoxide and carbon dioxide.

Disposal considerations

Waste treatment methods
Residual waste Dispose of in accordance with local regulations. Empty containers or liners may retain some
product residues. This material and its container must be disposed of in a safe manner
Contaminated packaging Empty containers should be taken to an approved waste handling site for recycling or
disposal. Since emptied containers may retain product residue, follow label warnings even
after container is emptied.
EU waste code The Waste code should be assigned in discussion between the user, the producer and the
waste disposal company.
Disposal methods/information Collect and reclaim or dispose in sealed containers at licensed waste disposal site.
Special precautions Dispose in accordance with all applicable regulations.