Registration Dossier
Registration Dossier
Data platform availability banner - registered substances factsheets
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Diss Factsheets
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 203-533-9 | CAS number: 107-93-7
- Life Cycle description
- Uses advised against
- Endpoint summary
- Appearance / physical state / colour
- Melting point / freezing point
- Boiling point
- Density
- Particle size distribution (Granulometry)
- Vapour pressure
- Partition coefficient
- Water solubility
- Solubility in organic solvents / fat solubility
- Surface tension
- Flash point
- Auto flammability
- Flammability
- Explosiveness
- Oxidising properties
- Oxidation reduction potential
- Stability in organic solvents and identity of relevant degradation products
- Storage stability and reactivity towards container material
- Stability: thermal, sunlight, metals
- pH
- Dissociation constant
- Viscosity
- Additional physico-chemical information
- Additional physico-chemical properties of nanomaterials
- Nanomaterial agglomeration / aggregation
- Nanomaterial crystalline phase
- Nanomaterial crystallite and grain size
- Nanomaterial aspect ratio / shape
- Nanomaterial specific surface area
- Nanomaterial Zeta potential
- Nanomaterial surface chemistry
- Nanomaterial dustiness
- Nanomaterial porosity
- Nanomaterial pour density
- Nanomaterial photocatalytic activity
- Nanomaterial radical formation potential
- Nanomaterial catalytic activity
- Endpoint summary
- Stability
- Biodegradation
- Bioaccumulation
- Transport and distribution
- Environmental data
- Additional information on environmental fate and behaviour
- Ecotoxicological Summary
- Aquatic toxicity
- Endpoint summary
- Short-term toxicity to fish
- Long-term toxicity to fish
- Short-term toxicity to aquatic invertebrates
- Long-term toxicity to aquatic invertebrates
- Toxicity to aquatic algae and cyanobacteria
- Toxicity to aquatic plants other than algae
- Toxicity to microorganisms
- Endocrine disrupter testing in aquatic vertebrates – in vivo
- Toxicity to other aquatic organisms
- Sediment toxicity
- Terrestrial toxicity
- Biological effects monitoring
- Biotransformation and kinetics
- Additional ecotoxological information
- Toxicological Summary
- Toxicokinetics, metabolism and distribution
- Acute Toxicity
- Irritation / corrosion
- Sensitisation
- Repeated dose toxicity
- Genetic toxicity
- Carcinogenicity
- Toxicity to reproduction
- Specific investigations
- Exposure related observations in humans
- Toxic effects on livestock and pets
- Additional toxicological data
Toxicity to aquatic algae and cyanobacteria
Administrative data
Link to relevant study record(s)
- Endpoint:
- toxicity to aquatic algae and cyanobacteria
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Study period:
- 2012-08-13 to 2012-08-16
- Reliability:
- 1 (reliable without restriction)
- Rationale for reliability incl. deficiencies:
- guideline study
- Qualifier:
- according to guideline
- Guideline:
- EU Method C.3 (Algal Inhibition test)
- Qualifier:
- according to guideline
- Guideline:
- OECD Guideline 201 (Alga, Growth Inhibition Test)
- GLP compliance:
- yes (incl. QA statement)
- Specific details on test material used for the study:
- SOURCE OF TEST MATERIAL
- Source and lot/batch No.of test material: DEBR 012553 - Analytical monitoring:
- yes
- Details on sampling:
- Sampling:
For determination of the test item concentration, samples were taken from the testing concentration and the control at the start and at the end of the test. Six replicate samples were taken from the test concentration (100 mg/L) at the start (before distribution into the test vessels) and one sample from each test vessel respectively (six replicates in total) at the end of the test. From the control, six replicate samples were taken at the start and at the end of the experiment. - Vehicle:
- yes
- Details on test solutions:
- PREPARATION AND APPLICATION OF TEST SOLUTION
- Method: A stock solution of 100 mg/L was first prepared by dissolving an amount of 0.1 g test item in 1000 mL dilution water (OECD medium) by mechanical dispersion. The test item is highly acidic and reduces the pH of the test solution significantly (pH 4.62; measured in the pre experiment at 100 mg/L), therefore the pH of the stock solution was adjusted to the pH of the OECD Medium using 1N NaOH. The test solutions of the chosen test concentrations were prepared by appropriate diluting of this stock solution. The test solutions were prepared immediately before introduction of algae (start of the experiment).
- Chemical name of vehicle: Algal Mineral Salts Test Medium - Test organisms (species):
- Raphidocelis subcapitata (previous names: Pseudokirchneriella subcapitata, Selenastrum capricornutum)
- Details on test organisms:
- TEST ORGANISM
- Common name: Pseudokirchneriella subcapitata (formerly known as Selenastrum capricornutum)
- Strain: 61.81 SAG
- Source: SAG: Collection of Algal Cultures, Inst. Plant Physiology, University of Göttingen, Germany
- Age of inoculum (at test initiation): used when still exponentially growing, normally after an incubation period of about three days - Test type:
- static
- Water media type:
- freshwater
- Limit test:
- no
- Total exposure duration:
- 72 h
- Test temperature:
- 21.5 – 22.1 °C
- pH:
- 7.74 – 9.31
- Nominal and measured concentrations:
- The following nominal concentrations of test item were tested: 6.6, 12.5, 25.0, 50.0 and 100 mg/L. The corresponding calculated geometric mean test item concentrations (based on the analytical measurements) were: 2.6, 10.3, 18.3, 46.5 and 57.5 mg/L.
- Details on test conditions:
- TEST SYSTEM
- Test vessel: Erlenmeyer flasks of ~250 mL volume with 100 mL test medium.
- Initial cells density: 10E04 cells/mL
- No. of vessels per concentration (replicates):The test was performed with three replicates at each test concentration
- No. of vessels per control (replicates): six replicates were included in the untreated control.
GROWTH MEDIUM
- Standard medium used: yes
TEST MEDIUM / WATER PARAMETERS
- in accordiance with the guideline
OTHER TEST CONDITIONS
- Adjustment of pH: Yes, 1N NaOH
- Light intensity and quality: 7862 lux, with a spectral range of 400-700 nm
EFFECT PARAMETERS MEASURED (with observation intervals if applicable) :
- Determination of cell concentrations: The cell numbers were determined at 24, 48 and 72 hours after starting the test by manual cell counting using a microscope with counting chamber.
- Morphological Changes of Algal Cells: The morphological changes of algal cells compared to the control were examined at 24, 48 and 72 hours after starting the test using a microscope. - Reference substance (positive control):
- yes
- Remarks:
- Toxic Reference Control: potassium dichromate; Untreated Control: Algal Mineral Salts Test Medium
- Key result
- Duration:
- 72 h
- Dose descriptor:
- EC10
- Effect conc.:
- > 57.5 mg/L
- Nominal / measured:
- meas. (geom. mean)
- Conc. based on:
- test mat.
- Basis for effect:
- other: growth rate and Yield
- Remarks on result:
- other: 95% CL not applicable
- Key result
- Duration:
- 72 h
- Dose descriptor:
- EC50
- Effect conc.:
- > 57.5 mg/L
- Nominal / measured:
- meas. (geom. mean)
- Conc. based on:
- test mat.
- Basis for effect:
- other: growth rate and yield
- Remarks on result:
- other: 95% CL not applicable
- Key result
- Duration:
- 72 h
- Dose descriptor:
- NOEC
- Effect conc.:
- 57.5
- Nominal / measured:
- meas. (geom. mean)
- Conc. based on:
- test mat.
- Basis for effect:
- other: growth rate and yield
- Remarks on result:
- other: 95% CL not applicable
- Key result
- Duration:
- 72 h
- Dose descriptor:
- LOEC
- Effect conc.:
- > 57.5 mg/L
- Nominal / measured:
- meas. (geom. mean)
- Conc. based on:
- test mat.
- Basis for effect:
- other: growth rate and yield
- Remarks on result:
- other: 95% CL not applicable
- Details on results:
- TEST CONCENTRATION
The measured concentrations deviated more than 20 % from the nominal during the experiment therefore the exposure concentrations were calculated as geometric mean of the concentrations measured at the start and at the end of the test.
BIOLOGICAL RESULTS
All biological results are related to the geometric mean of the measured test item concentrations during the experiment.
GROWTH INHIBITION
The test item had no statistically significant inhibitory effect on the growth of Pseudokirchneriella subcapitata after the exposure period of 72 hours based on the average specific growth rate and yield in the whole tested concentration range.
SHAPE OF THE ALGAL CELLS
Abnormal appearance of the algal cells was not observed during the experiment.
CELL DENSITY IN CONTROL
The cell density in the control has increased from nominal N = 1 × 10E04 cells/mL at the start of the test (0 hours) to N = 59.50 × 10E4 cells/mL (mean value) after 72 hours in the in the Untreated Control. Thus, the algal growth in the control was high enough to pass the validity criteria in this assay.
BEHAVIOUR OF THE TEST ITEM
The behaviour of the test item in test medium was monitored during the test by visual (unaided eye) assessment. In the higher concentrations the test medium was observed as turbid and something yellowish compared to the green colour of the control medium at the end of the test. The turbidity and the yellowish colour of the test medium showed dose dependent relationship. - Conclusions:
- In this 72-h algal growth inhibition test with Crotonic acid, the 72-h EC50 and EC10 values based on growth rate and yield was determined to be higher than 57.5 mg/L. The 72-h NOEC related to growth rate and yield was determined to be 57.5 mg/L and the 72-h LOEC related to growth rate and yield was determined to be higher than 57.5 mg/L.
Reference
Description of key information
Toxicity to aquatic algae and cyanobacteria: EC50 value and NOEC was equal or higher than 57.5 mg/L.
Key value for chemical safety assessment
- EC50 for freshwater algae:
- 57.5 mg/L
- EC10 or NOEC for freshwater algae:
- 57.5 mg/L
Additional information
In a growth inhibition test on algae according to OECD 201, EU Method C.3 and GLP guidlines (Toxi-Coop Zrt. (a), 2012) Crotonic acid was tested in concentrations of 6.3, 12.5, 25.0, 50.0 and 100.0 mg/L over a test period of 72 hours. Since the measured concentrations of the test item were out of the range ( deviated more than 20 %) at the end of the test the exposure concentrations were calculated as geometric mean which is corresponding to 2.6, 10.3, 18.3, 46.5 and 57.5 mg/L. The obtained results showed that the test item had no toxic effect on algae up to at least the concentration of 57.5 mg/L. Accordingly, the EC10 and EC50 values based on growth rate and yield were determined to be higher than 57.5 mg/L. The NOEC was determined to be equal or higher than 57.5 mg/L.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.