Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 263-372-5
CAS number: 62010-10-0
Assessment of this endpoint and derivation of adsorption coefficients are element-based (i.e., not substance-based). A total of five studies was used in a weight of evidence approach to cover the endpoint. Two studies were added as supportive, but the data were not used to derive the key adsorption coefficients. Reliable data were available for soil, suspended matter, and sediment. The following final key values were retained: a log Kp of 5.00 for suspended matter-water, a log Kp of 5.47 for sediment-water, and a log Kp of 4.13 for soil-water. Adsorption to sediment and suspended matter appears to be slightly more pronounced than for soil for zirconium. Based on these Kp values, zirconium clearly has a strong potential for adsorption to particulate matter. For adsorption to occur however, zirconium has to end up in the aqueous phase of the environmental compartment under consideration (water column, or pore water in sediment/soil).
Adsorption of zirconium compounds (as such) to particles of suspended
matter, sediment, or soil, is not expected to occur. It is rather the
zirconium cation (or potentially other cationic zirconium species) that
will adsorb to particulate matter. Therefore, the assessment of
adsorption capacity and the derivation of adsorption coefficients is
element-based (and not substance-based).
In total, seven studies were identified containing relevant information
on adsorption of zirconium to particulate matter. Five of these studies
were considered reliable and were used in a weight of evidence approach.
Data were available for soil, sediment, and suspended matter and will be
further discussed below.
For suspended matter, two studies were identified as useful. Veselý et
al. (2001) reported a median log Kp of 3.23 for a series of samplings
along Czech rivers. Gobeil et al. (2005) analysed samples from several
locations along the St. Lawrence river, at one location river water was
sampled and at the other location effluent of the Montreal waste water
treatment plant was sampled. Based on average concentrations of
zirconium in filtered water and suspended particulate matter, log Kp
values of 6.26 and 5.51 were calculated for these locations. Because
there is a limited amount of values available, the average log Kp
(arithmetic mean) of 5.00 for these two studies is selected as key value
for characterising distribution between suspended matter and water.
For sediment, only one reliable study is available (Klimisch score of
2). In this study, zirconium concentrations were determined in paired
samples of filtered water and sediment from 20 sites along the
Blesbokspruit, South Africa. Based on data from this study (Roychoudhury
and Starke, 2006) an average log Kp value (arithmetic mean) of 5.47 was
calculated, the range being 5.12-5.92.
For soil, two reliable studies were retained for the determination of
the key value. Ferrand (2005) (see also Ferrand et al., 2006) conducted
batch equilibrium experiments with ZrOCl2 solutions and two different
soils (acidic sandy clayey loamy soil and a clayey calcareous soil). The
Kp values resulting from this study were 6,000 L/kg (dw) (or log Kp of
3.78) for the acidic soil and 30,000 L/kg (dw) for the calcareous soil
(or log Kp of 4.48). The average log Kp value (arithmetic mean) of 4.13
was taken as key log Kp for soil.
Two other studies from Thibault et al. (1990) and Drndarski and
Golobocanin (1995) were also available. The first study predicted Kp
values for 4 different types of soil based on a previously reported
plant to soil concentration factor. The log Kp values for sandy, loamy,
clay and organic soil were calculated to be 2.76, 3.31, 3.49 and 3.86,
respectively. Since this plant to soil concentration factor was also a
predicted value and no information was reported on the applicability and
accuracy of the regression equation used for prediction of Kp values,
the reliability of the study is considered not high enough. This study
was not used for the derivation of the final Kp value for soil but was
considered a supporting study.
The other study from Drndarski and Golobocanin (1995) investigated a
series of sampling sites along the Sava River. Analyses of zirconium
concentrations in both filtered water and sediment yielded a log Kp of
approximately 3.1, which was only reported in a figure, and therefore
cannot be considered reliable. The result was used as supporting
Overall, strong adsorption of zirconium to particulate matter is
observed, whether soil, sediment, or suspended matter.
For adsorption to occur however, zirconium has to end up in the aqueous
phase of the environmental compartment under consideration (water
column, or pore water in sediment/soil).
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
På den här webbplatsen används kakor. Syftet är att optimera din upplevelse av den.
Welcome to the ECHA website. This site is not fully supported in Internet Explorer 7 (and earlier versions). Please upgrade your Internet Explorer to a newer version.
Do not show this message again