Registration Dossier
Registration Dossier
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 434-430-9 | CAS number: -
Partition coefficient
Administrative data
Link to relevant study record(s)
- Endpoint:
- partition coefficient
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Study period:
- October 2005
- Reliability:
- 1 (reliable without restriction)
- Rationale for reliability incl. deficiencies:
- other: Study conducted in compliance with agreed protocols, with no or minor deviation from standard test guidelines and/or minor methodological deficiencies, which do not affect the quality of relevant results.
- Reason / purpose for cross-reference:
- reference to same study
- Qualifier:
- according to guideline
- Guideline:
- OECD Guideline 117 (Partition Coefficient (n-octanol / water), HPLC Method)
- Deviations:
- no
- Qualifier:
- according to guideline
- Guideline:
- EU Method A.8 (Partition Coefficient)
- Deviations:
- no
- GLP compliance:
- yes (incl. QA statement)
- Type of method:
- HPLC method
- Partition coefficient type:
- octanol-water
- Analytical method:
- high-performance liquid chromatography
- Type:
- log Pow
- Partition coefficient:
- > 6.5
- Temp.:
- 22 °C
- pH:
- 7
- Details on results:
- Calculation of the partition coefficient (Pow):
For the structural formula of EA-3098, the Pow was calculated to be 7.6 X 10E12 (log Pow = 12.9) using the Rekker calculation method.
HPLC method:
Main test:
No test substance peaks were observed in the HPLC chromatograms of EA-3098. Under the same chromatographic conditions, the retention time of 2,4-DDT (log Pow 6.5) was 30.5 minutes. Hence it was concluded that the log Pow of EA-3098 is >6.5.
HPLC chromatograms of the EA-3098 solution, the test substance blank solution, the 2,4-DDT reference solution and the 2,4-DDT blank solution are shown in Figures 1 to 4 (see attached background material).
Additional test:
Because no test substance peaks were observed during the main test an additional test was performed to make sure that the test substance can be eluted from the column.
In the chromatograms of the 193 mg/I EA-3098 test solution, one large peak and six small test substance peaks were observed. This clearly illustrates that the test substance EA-3098 can be eluted from the HPLC column and that, therefore, the partition constant as determined during the main test is correct.
HPLC chromatograms of the EA-3098 test solution and the test substance blank solution are shown in Figures 5 to 6 (see attached background material). - Conclusions:
- The HPLC method gave the following results:
The Pow value for EA-3098 is >3.2 x 10E6 (log Pow >6.5) at 22.0°C and at neutral pH. - Executive summary:
The determination of the partition coefficient (n-octanol/water) of EA-3098 was based on the following guidelines:
OECD 117 "Partition coefficient (n-octanol/water) High Performance Liquid Chromatography (HPLC) method" and EEC method A.8 "Partition Coefficient" EEC Directive 92/69/EEC.
The Rekker calculation method was used for a preliminary estimation of the partition coefficient. Based on the results of this method, it was decided to perform the HPLC method for an accurate determination of the partitioc coefficient.
Rekker calculation method (Pow):
From the structural formula of EA-3098, the log Pow was calculated to be 12.9.
Perrin's calculation method (pKa):
From the structural formula of EA-3098, the pKa values for the basic groups were calculated to be 0.48 and -0.12 and the pKa values for the acidic groups were calculated to be 16.3 and 16.9.
Based on these calculations, the aqueous phase used during the HPLC method was not buffered. At neutral, > 90% of the test substance is in a non-ionised form.
HPLC method:
Main test:
In the chromatograms of the 213 mg/l EA-3098 test solution, no test substance peaks were observed. Hence, it was concluded that the log Pow of EA-3098 is > 6.5 (Pow> 3.2 x 106).
Additional test:
Because no test substance peaks were observed during the main test an additional test was performed to make sure that the test substance can be eluted from the column.
In the chromatograms of the 193 mg/I EA-3098 test solution, one large peak and six small test substance peaks were observed. This clearly illustrates that the test substance EA-3098 can be eluted from the HPLC column and that, therefore, the partition constant as determined during the main test is correct.
Conclusion:
The Pow value for EA-3098 is >3.2 x 106 (log Pow >6.5) at 22.0°C and at neutral pH.
Reference
Calculation of the dissociation constant (pKa)
From the structural formula of EA-3098, the following pKa values for acidic and basic groups in EA-3098 were calculated using the Perrin's calculation method.
Acidic groups:
RRCHOH: 16.3
RRCHOH: 16.9
Basic groups:
RCONHR: -0.12
RCONHR: 0.48
Based on these calculations, the aqueous phase used during the HPLC method was not buffered. At neutral pH >90% of the test substance is in a non-ionised form.
Description of key information
The Pow value for EA-3098 is >3.2 x 106 (log Pow >6.5) at 22.0°C and at neutral pH.
Key value for chemical safety assessment
- Log Kow (Log Pow):
- 6.5
- at the temperature of:
- 22 °C
Additional information
The determination of the partition coefficient (n-octanol/water) of EA-3098 was based on the following guidelines:
OECD 117 "Partition coefficient (n-octanol/water) High Performance Liquid Chromatography (HPLC) method" and EEC method A.8 "Partition Coefficient" EEC Directive 92/69/EEC.
The Rekker calculation method was used for a preliminary estimation of the partition coefficient. Based on the results of this method, it was decided to perform the HPLC methood for an accurate determination of the partitioc coefficient.
Rekker calculation method (Pow):
From the structural formula of EA-3098, the log Pow was calculated to be 12.9.
Perrin's calculation method (pKa):
From the structural formula of EA-3098, the pKa values for the basic groups were calculated to be -0.48 and 0.12 and the pKa values for the acidic groups were calculated to be 16.3 and 16.9.
Based on these calculations, the aqueous phase used during the HPLC method was not buffered. At neutral, > 90% of the test substance is in a non-ionised form.
HPLC method:
Main test:
In the chromatograms of the 213 mg/l EA-3098 test solution, no test substance peaks were observed. Hence, it was concluded that the log Pow of EA-3098 is > 6.5 (Pow> 3.2 x 106).
Additional test:
Because no test substance peaks were observed during the main test an additional test was performed to make sure that the test substance can be eluted from the column.
In the chromatograms of the 193 mg/I EA-3098 test solution, one large peak and six small test substance peaks were observed. This clearly illustrates that the test substance EA-3098 can be eluted from the HPLC column and that, therefore, the partition constant as determined during the main test is correct.
Conclusion:
The Pow value for EA-3098 is >3.2 x 106(log Pow >6.5) at 22.0°C and at neutral pH.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
