Registration Dossier

Administrative data

First-aid measures

Description of First Aid measures
Eye contact
- Flush eye with water for 15 minutes while lifting the upper and lower lids. Seek medical help if irritation develops or persists.
Skin contact
- Wash with soap and water. Get medical attention if irritation develops or persists.
Inhalation
- Remove victim to fresh air. Get medical attention if irritation develops or persists.
Ingestion
- If conscious, wash out mouth with small amount of water. Do not give anything to an unconsciousness or drowsy person. Do not induce vomiting. Get medical attention.

Most Important symptoms and effects, both acute and delayed
- None expected under normal use.

Indication of any immediate medical attention and special treatment needed
- Immediate medical treatment is not anticipated to be required.

Fire-fighting measures

Extinguishing Media
- Water spray, carbon dioxide, dry chemical or foam to extinguish fires.

Special Hazards Arising from the Substance or Mixture
Unusual Fire and Explosion Hazards
- None
Combustion Products
- Carbon dioxide and carbon monoxide.

Advice for Fire-Fighters:
- Firefighters should wear full emergency equipment and approved positive pressure self-contained breathing apparatus. Cool exposed intact containers with water spray or stream.

Accidental release measures

Personal Precautions, Protective Equipment and Emergency Procedures
Personal Protective Measurers
Eye/face Protection
- Wear safety glasses or chemical safety goggles to avoid eye contact.
Skin Protection
- Impervious clothing is recommended if needed to avoid skin contact.
Hands
- Impervious gloves such as rubber are recommended.
Respiratory Protection
- None normally needed. If the exposures are high use an approved respirator with an organic vapor/dust/mist filter. Selection of respiratory protection depends on the contaminant type, form and concentration. Select in accordance with good Industrial Hygiene practice.
Other protection
- Suitable eye and skin washing facilities should be available in the work area.
Environmental Precautions
- Prevent entry in storm sewers and waterways. Report spill as required by local and federal regulations.
Methods and Material for Containment and Cleaning Up:
- Collect with an inert absorbent, and place into closable containers for disposal. Wash spill site with detergent and water.
Disposal considerations
Waste Treatment Methods
- Dispose of contents/container in accordance with local/regional/national/international regulations.

Handling and storage

Precautions for Safe Handling
- Use suitable protective equipment. Avoid contact with eyes, skin and clothing. Avoid breathing mists. Wash thoroughly after handling. Remove contaminated clothing and launder before re-use. Do not eat, drink, or smoke while handling.
Conditions for Safe Storage, Including any Incompatibilities
- Protect containers from physical damage. Store tightly sealed under inert gas in a cool, well-ventilated area. Keep away from ignition sources. Keep containers closed when not in use. Follow all MSDS precautions in handling empty containers.
Specific end use(s)
- Industrial uses: Industrial use, intermediate for the manufacture of chemicals
- Professional uses: Research and development

Transport information

Shippingopen allclose all
SpecialProvisionsopen allclose all
Shippingopen allclose all
Remarksopen allclose all

Marine transport (IMDG)

Remarksopen allclose all
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Stability and reactivity

Disposal considerations