Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 268-215-4
CAS number: 68037-92-3
This substance is identified by SDA Substance Name: C16-C22 alkyl amine and SDA Reporting Number: 21-029-00.
General advice : Immediate medical attention is required. Move out of dangerous area. Burns may occur several hours after the removal of the product. Inhalation : Obtain medical attention immediately. Skin contact : Take off contaminated clothing and shoes immediately. Wash skin immediately with 0,5 % acetic acid in water, and then with soap and water. Carefully remove paste or solidified product. Immediate medical treatment is necessary as untreated wounds from corrosion of the skin heal slowly and with difficulty.
Skin irritation, if untreated may be prolonged and serious (eg necrosis). This may be prevented by early treatment with medium strength corticosteroids. Eye contact : In case of contact with eyes, rinse immediately with 0.5% acetic acid in water for a few minutes, followed by rinsing with
plenty of water for as long as possible. Eyelids should be held away from the eyeball to ensure thorough rinsing. Get medical attention immediately. Continue to rinse during transport. Remove contact lenses. Protect unharmed eye. Small amounts splashed into eyes can cause irreversible
tissue damage and blindness. Ingestion : Clean mouth with water and drink afterwards plenty of water. Never give anything by mouth to an unconscious person. Take victim immediately to hospital. Do not induce vomiting! May cause chemical burns in mouth and throat.
Suitable extinguishing media : Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.
Unsuitable extinguishingmedia : High volume water jet Specific hazards during fire fighting : Treat as oil fire. Do not use a solid water stream as it may scatter and spread fire. Water spray may be ineffective unless used by experienced firefighters. Do not allow run-off from fire fighting to enter drains or water courses. Special protective equipment for fire-fighters : In the event of fire, wear self-contained breathing apparatus. Further information : Collect contaminated fire extinguishing water separately. This must not be discharged into drains. Fire residues and contaminated fire extinguishing water must be disposed of in accordance with local regulations.
Personal precautions: Use personal protective equipment. Ensure adequate ventilation. Environmental precautions : Do not flush into surface water or sanitary sewer system. If the product contaminates rivers and lakes or drains inform respective authorities.
Methods for cleaning up : Pick up and arrange disposal without creating dust. Keep in suitable, closed containers for disposal.
Handling Advice on safe handling :Smoking, eating and drinking should be prohibited in the
application area. Dispose of rinse water in accordance with local and national regulations. Advice on protection against fire and explosion
: Provide appropriate exhaust ventilation at places where dust is formed. Storage Requirements for storage areas and containers : Keep container tightly closed in a dry and well-ventilated place. Avoid elevated temperatures Reacts with copper, aluminium, zinc and their alloys. Other data : No decomposition if stored and applied as directed.
Components with workplace control parameters Contains no substances with occupational exposure limit values. Engineering Controls
Provide eyewash station and safety shower. Keep solutions of 0.5% acetic acid in water close at hand. Personal protective equipment Respiratory protection : Keep respiratory equipment available. If use conditions can generate aerosol or mist, wear suitable respiratory equipment. Wear full face mask supplied with: Gas cartridge K (ammonia, green). Combination filter ABEKP. Hand protection : Glove material: Nitrile rubber butyl-rubber
Eye protection : Tightly fitting safety goggles Wear face-shield and protective suit for abnormal processing problems. In case of contact with eyes, rinse immediately with 0.5% acetic acid in water for a few minutes, followed by rinsing with plenty of water for as long as possible. Eyelids should be held
away from the eyeball to ensure thorough rinsing. Skin and body protection : Protective suit Choose body protection according to the amount and
concentration of the dangerous substance at the work place. Hygiene measures : Avoid contact with skin, eyes and clothing. Dry-clean contaminated clothes before reuse.
Conditions to avoid : Extremes of temperature and direct sunlight. Hazardous decomposition products : No hazardous decomposition products are known. Hazardous reactions : Stable under normal conditions.
Product : The product should not be allowed to enter drains, water courses or the soil. Do not contaminate ponds, waterways or ditches with
chemical or used container. Hazardous waste Contaminated packaging : Empty remaining contents. Dispose of as unused product.
Do not re-use empty containers.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
Welcome to the ECHA website. This site is not fully supported in Internet Explorer 7 (and earlier versions). Please upgrade your Internet Explorer to a newer version.
Do not show this message again