Registration Dossier

Administrative data

First-aid measures

Description of first aid measures
General information In all cases of doubt, or when symptoms persist, seek medical advice.

After inhalation
Remove to fresh air.

After skin contact
Remove contaminated clothing immediately. Wash skin thorougly with soap and water or use recognised skin cleanser.
Do NOT use solvents or thinners.

After eye contact
Irrigate copiously with clean, fresh water for at least 15 minutes, holding the eyelids apart. Remove contact lenses.
Obtain medical attention.

After swallowing
Do NOT induce vomiting.
Obtain medical attention.

Most important symptoms and effects, both acute and delayed
No further relevant information available.

Indication of any immediate medical attention and special treatment needed
No further relevant information available.

Fire-fighting measures

Extinguishing media
Suitable extinguishing agents Alcohol resistant foam, CO2, powders, water spray.

For safety reasons unsuitable extinguishing agents
Water jet.

Special hazards arising from the substance or mixture
Appropriate breathing apparatus may be required.
Cool closed containers exposed to fire with water.


Advice for firefighters

Protective equipment:
No special measures required.

Additional information
Collect run-off from fire fighting.

Accidental release measures

Personal precautions, protective equipment and emergency procedures Ventilate the area.

Environmental precautions:
Do not allow to enter drains.
If the product contaminates rivers and lakes or sewers inform respective authorities.


Methods and material for containment and cleaning up:
Contain and collect spillage with non-combustible absorbent material, (e.g. sand, earth, diatomaceous earth, vermiculite) and place in container for disposal according to local regulations. Clean preferably with a detergent.
Avoid use of solvents.

Reference to other sections
See Section 7 for information on safe handling
See Section 8 for information on personal protection equipment.
See Section 13 for information on disposal.

Handling and storage

Precautions for safe handling
Avoid inhalation of vapour.
Smoking, eating and drinking should be prohibited in application area.

For personal protection see Section 8.
Comply with health and safety at work laws.
Avoid concentrations higher than the occupational exposure limits (see Section 8), if applicable.


Conditions for safe storage, including any incompatibilities

Storage

Requirements to be met by storerooms and containers:
Keep container tightly closed.No smoking.
Containers which are opened must be carefully resealed and kept upright to prevent leakage.

Further information about storage conditions:
Always keep in containers of the same material as the original one. Store in a dry, well ventilated place.
Keep away from heat and direct sunlight.
Store in accordance with the particular national regulations concerning water pollution.
Note Instructions on the label.


Specific end use(s)
No further relevant information available.

Transport information

Land transport (ADR/RID)

UN number:
Not classified according to transport regulations for dangerous goods (like ADR/RID, IMDG and ICAO/IATA).
Shippingopen allclose all
Class:
Not classified according to transport regulations for dangerous goods (like ADR/RID, IMDG and ICAO/IATA).
Classification code:
Not classified according to transport regulations for dangerous goods (like ADR/RID, IMDG and ICAO/IATA).
Packaging group:
Not classified according to transport regulations for dangerous goods (like ADR/RID, IMDG and ICAO/IATA).
Labels:
Not classified according to transport regulations for dangerous goods (like ADR/RID, IMDG and ICAO/IATA).
SpecialProvisionsopen allclose all

Inland waterway transport (ADN(R))

UN number:
Not classified according to transport regulations for dangerous goods (like ADR/RID, IMDG and ICAO/IATA).
Shippingopen allclose all
Class:
Not classified according to transport regulations for dangerous goods (like ADR/RID, IMDG and ICAO/IATA).
Classification code:
Not classified according to transport regulations for dangerous goods (like ADR/RID, IMDG and ICAO/IATA).
Packaging group:
Not classified according to transport regulations for dangerous goods (like ADR/RID, IMDG and ICAO/IATA).
Labels:
Not classified according to transport regulations for dangerous goods (like ADR/RID, IMDG and ICAO/IATA).
Remarksopen allclose all

Marine transport (IMDG)

UN number:
Not classified according to transport regulations for dangerous goods (like ADR/RID, IMDG and ICAO/IATA).
Proper shipping name and description:
Not classified according to transport regulations for dangerous goods (like ADR/RID, IMDG and ICAO/IATA).
Chemical name:
Not classified according to transport regulations for dangerous goods (like ADR/RID, IMDG and ICAO/IATA).
Class:
Not classified according to transport regulations for dangerous goods (like ADR/RID, IMDG and ICAO/IATA).
Packaging group:
Not classified according to transport regulations for dangerous goods (like ADR/RID, IMDG and ICAO/IATA).
EmS code:
Not classified according to transport regulations for dangerous goods (like ADR/RID, IMDG and ICAO/IATA).
Labels:
Not classified according to transport regulations for dangerous goods (like ADR/RID, IMDG and ICAO/IATA).
Remarksopen allclose all

Air transport ICAO/IATA

UN number:
Not classified according to transport regulations for dangerous goods (like ADR/RID, IMDG and ICAO/IATA).
Proper shipping name and description:
Not classified according to transport regulations for dangerous goods (like ADR/RID, IMDG and ICAO/IATA).
Chemical name:
Not classified according to transport regulations for dangerous goods (like ADR/RID, IMDG and ICAO/IATA).
Class:
Not classified according to transport regulations for dangerous goods (like ADR/RID, IMDG and ICAO/IATA).
Packaging group:
Not classified according to transport regulations for dangerous goods (like ADR/RID, IMDG and ICAO/IATA).
Labels:
Not classified according to transport regulations for dangerous goods (like ADR/RID, IMDG and ICAO/IATA).
Remarksopen allclose all
SpecialProvisionsopen allclose all

Exposure controls / personal protection

Additional information about design of technical systems:
If relevant apply technical measures to comply with the occupational exposure limits. This can be by a good general
extraction and-if practically feasible, be achieved by local exhaust ventilation.


Control parameters

Components with critical values that require monitoring at the workplace:
Numerical data - if specified - are taken from the valid national lists.


Exposure controls

Personal protective equipment

Breathing equipment:
The use of respiratory protective measures, such as masks with filters for organic Vapours and dusts / mists are, in the absence of appropriate technical equipment, necessary for the protection of the employee. If exposure is above the exposure limit, then an appropriate, approved respirator must be worn. Please refer to the appropriate EU standard 14387.

Protection of hands:
For prolonged or repeated contact use gloves.
Barrier creams may help to protect exposed skin, they should however not be applied once have come into contact with the product.
The glove material has to be impermeable and resistant to the product/ the substance/ the preparation.

Material of gloves
The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance of the glove material can not be calculated in advance and has therefore to be checked prior to the application.

Penetration time of glove material
The exact break trough time has to be found out by the manufacturer of the protective gloves and has to be observed.

Eye protection:
Use safety eyewear designed to protect against splash of liquids.

Body protection:
Working clothes must not consist of textiles which show a dangerous melting behaviour in case of fire.
All parts of the skin should be washed after contact.

Stability and reactivity

Reactivity
No further relevant information available.

Chemical stability
No further relevant information available.

Thermal decomposition / conditions to be avoided:
Stable under recommended storage and handling conditions (see section 7).

Conditions to avoid
No further relevant information available.

Incompatible materials:
Keep well away from oxidising agents and strongly alkaline or strongly acid materials in order to avoid exothermic reactions.

Hazardous decomposition products:
Exposition to high temperatures may produce hazardous decomposition poducts such as: carbon dioxide, carbon monoxide and smoke.

Disposal considerations

Waste treatment methods

Recommendation
Do not allow to enter drains.

European waste catalogue
08 03 12: waste ink containing dangerous substances

Uncleaned packagings:
Waste

Recommendation:
Emptied containers should be disposed off into scrap recycling or reconditioning respectively.
Not orderly emptied cans and ink remnants are special waste.